Difference between revisions of "Talk:General"

From PinWiki
Jump to navigation Jump to search
(Created page with "williams - 6/24/2011 - I removed a link to a specific product (microswitch) since it could become bad if the vendor changed their website. Feel free to change back if you feel i...")
 
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
 
williams - 6/24/2011 - I removed a link to a specific product (microswitch) since it could become bad if the vendor changed their website.  Feel free to change back if you feel it's helpful.
 
williams - 6/24/2011 - I removed a link to a specific product (microswitch) since it could become bad if the vendor changed their website.  Feel free to change back if you feel it's helpful.
 +
 +
Updated the solder section to include more detail as to what to buy, and good sources. Provided links for where to get current 63/37 products.
 +
 +
I left the Pinball Life link in, but noted that the product has an obsolete core count (50). It isn't the miracle product that the vendor claims
 +
 +
I just changed a bullet point under tools to read:
 +
 +
*Hex Key set/Allen Wrenches.  5/32" (4mm) is used on flippers.  5/16" is used for Stern (DE/Sega) head latches if the game's tool can't be found.
 +
 +
... but in reality, I hardly ever use hex keys (and the Allen Wrenches name should ne removed) except for the two I enumerated.

Latest revision as of 20:38, 28 December 2014

williams - 6/24/2011 - I removed a link to a specific product (microswitch) since it could become bad if the vendor changed their website. Feel free to change back if you feel it's helpful.

Updated the solder section to include more detail as to what to buy, and good sources. Provided links for where to get current 63/37 products.

I left the Pinball Life link in, but noted that the product has an obsolete core count (50). It isn't the miracle product that the vendor claims

I just changed a bullet point under tools to read:

  • Hex Key set/Allen Wrenches. 5/32" (4mm) is used on flippers. 5/16" is used for Stern (DE/Sega) head latches if the game's tool can't be found.

... but in reality, I hardly ever use hex keys (and the Allen Wrenches name should ne removed) except for the two I enumerated.