Difference between revisions of "Beginner's Notes"
m (→Required Tools) |
|||
Line 49: | Line 49: | ||
:: TIP120 Transistors | :: TIP120 Transistors | ||
:: IN4004 Diodes | :: IN4004 Diodes | ||
+ | :: .156 and .100 Molex connector pins (depending on machine, might also need .084 and 0.93) | ||
== Electro Mechanical or Solid State Games == | == Electro Mechanical or Solid State Games == |
Revision as of 13:27, 15 June 2011
Note: This page is a work in progress. Please help get it to a completed state by adding any useful information to it. |
1 Introduction
Pinball machines are mechanical devices and will eventually fail to work as designed. On the flip side, all major pinball machine manufactures built their games as industrial-grade equipment, specifically designed to take the abuse of being on location.
The information in this Wiki should go a long way toward helping you fix your pinball machine. If there is something unclear on any specific topic, feel free to ask questions in the forums about your problem, or post over on rec.games.pinball. Frequently, solutions posted on RGP find their way into the Wiki... :-)
2 Other sources of information
The pinball community is blessed with a fantastic group of dedicated hobbyists and parts suppliers.
In addition to this Wiki, a tremendous resource for pinball information is the rec.games.pinball newsgroup. The FAQ for this group can be found here: http://www.xmission.com/~daina/rgpFAQ/coolrgpFAQ.html
Another tremendous source is the Internet Pinball Database (IPDB). The IPDB is a great place to research games. The database contains photos, descriptions, history, production counts and other valuable information. The database is an ongoing project with data added continually. The administrator of the IPDB takes great care to ensure that the information contained within it is clear and accurate. While not a repair site, the IPDB can provide helpful information with game specific issues. Many machines are documented with both external and internal photos that can assist in restoring or repairing your game. Make this database your first stop when researching a game.
3 Required Tools
You'll probably build your toolset as you go, but the following list is a general set that can accomplish many pinball repairs.
- Mechanical Tools
- Hex Key set/Allen Wrenches
- Ignition point file. Used ONLY on EM or High Voltage tungsten contacts.
- Leaf switch adjusters
- Needle nose pliers - a mini-pliers set is handy
- Nut driver set. Should include 1/4" and 5/16" at minimum. Many electronic games also use 11/32" and 3/8" nuts for wire form ramp assemblies
- Screwdriver set. Should include #1 and #2 Flat head and Phillips head at minimum.
- Security Torx Bit set. Used on newer machines for lock plates and topper domes.
- Socket set, open end, or box wrenches. Should include 9/16 and 5/8 at minimum. Used for leg bolts and head bolts.
- Electrical Tools
- Soldering/Desoldering equipment
- Temperature controlled equipment is best for circuit board repair. See the Tools of the Trade section for more information.
- Crimping tool
- Multimeter with diode function (spend more than $10.00) RadioShack or Sears are among the brands.
- Side cutters
- Wire stripper
- For newer, solid state machines, a good logic probe can be useful. Fry's Electronics has several.
4 Parts to have on hand
- All Machines
- Electromechanical Machines
- Solid State Machines
- Replacement microswitch. Long lever microswitch makes a good replacement that you can cut/form to the shape you need.
- TIP120 Transistors
- IN4004 Diodes
- .156 and .100 Molex connector pins (depending on machine, might also need .084 and 0.93)
5 Electro Mechanical or Solid State Games
Pinball machines come in two basic flavors: Electro Mechanical(EM) or Solid State games. EM games can usually be recognized by the score display. EM machines have either light box scoring (lights on the backbox indicate score) or score reels that click over when points are registered. Solid State (SS) games have electronic scoring with either LED displays, or in more recent vintage, dot-matrix displays.
EM machines generally do not have any circuit boards, all scoring and playfield devices being mechanical fired off with relays, switches, and solenoids. Solid state games will have relays and solenoids with all scoring and game rules contained in the circuit boards. SS games can and do have a richer rule set because of the advantages of solid state circuitry. SS games also have more sounds, speech, and music, whereas EM machines are limited to bells and chimes.
During the manufacturers conversion from EM to SS games, some games were released in both an EM and an SS version. The Bally game Mata Hari being an example. Bally produced over 16,000 games in the SS version and only 170 as an EM machine. If you can find an EM Mata Hari, you have a real collectible.
6 Opening Your Pinball Machine
One of the first tasks you need to learn to work on your pinball machine is how to open the front door and remove the glass. Most pinball machines come with a locked front door. Often this key is lost. Before you drill out the lock search around for the key. Look in the backbox if it is open to see if a key is hanging in there. Sometimes the latch on the back side of the lock has been removed and the only thing holding the door closed is the dirt, gunk, or even minor bends in the door itself, so give a bit of a tug on the coin return area to try to open the door before going any further. If you can't find the key and the lock is still intact you will need to drill the lock out to open the door.
Once the door is unlocked or the lock drilled out simply swing it open. If it is stuck, you can put your hand in the coin return slot to get a better grip.
Once you have the door open, look inside and you will notice a bar near the top of the machine. Move the lever down by pushing on it. This action moves a locking bar and releases the lock down bar. If the machine has been setting idle for years it may be difficult to swing the lever from accumulated gunk. One method I have heard to get the bar moving is to tie a weight to the bar and let it hang there for awhile. Eventually, the gunk will give way and the lever moved to the open position. When the lever is in the down position pull up on the lock down bar and remove it from the game. On some games (Chicago Coin and Data East) the lever may be spring loaded requiring you to hold the lever in the open position while removing the bar.
With the lever removed it is a good idea to clean all of the surfaces to prevent more sticking problems. The next step is to remove the glass. One must take safety precautions in removing the glass. Most pinball glass is tempered, some are not. Before I remove any glass I put on heavy work gloves and safety glasses. Before removing the glass have a safe place to put it. I use a thin foam pad to place my glass on and not on a concrete basement floor. If moving the glass across the room make sure the path from the machine to the glass storage area is clean with no obstacles on the floor that you could trip on.
Start by placing your hands on the glass and sliding it out along the track. You could have more gunk in the track making sliding the glass difficult. I have also encountered machines where the cabinet is not square, putting pressure on the glass and making it difficult to remove. If the machine was dragged across the floor, which puts pressure on the legs, the cabinet could be out of square. Use the Armstrong lifters to raise and lower the machine to hopefully put it back on square, at least some.
Once you have moved the glass somewhat you can push it from the upper part of the playfield. Proceed with caution and remove the glass and place it aside. You now have access to the inners of the lower cabinet and can start to make repairs.
7 Cleaning Your Pinball Machine
It is generally accepted to use Novus #2 to clean your playfield. Under no circumstances should you use Windex or any other glass cleaner on your playfield. In the past manufacturers recommend a product called Wildcat or Mill Wax but both have been shown that they could damage the playfield paint. Novus is a general plastic cleaner that can be found from any pinball parts supplier, The Container Store, or possibly a local auto parts store. It is the recommended cleaner by most if not all pinball manufacturers. You can additionally apply a layer of pure carnauba wax as an extra layer of protection after cleaning the playfield.
Novus should also be used to clean playfield plastics. Novus makes three grades of cleaner (#1, #2, and #3) with varying grades of abrasiveness. Novus #2 should be all you need but Novus #3 can be useful for plastics that are very dull. Use care when cleaning the printed side of the plastic. You should never use Novus #3 on your playfield.
If your playfield rubber is dry and cracked it should be replaced. Kits to replace all rubber on a machine are available from all of the pinball suppliers. Rubber that is is good shape but dirty can be cleaned with Naptha or lighter fluid.
You can safely clean the cabinet with a product like Simple Green or Goo Gone. Be sure to test the cleaner in an inconspicuous area first to make sure no paint is removed. Different eras of machines are more susceptible to have paint removal.
8 Fuses
All pinball machines have fuses. Fuses are used in the machine to protect the internal components from damage in the event of an electrical short. If you have turned on the machine and did not get the expected result, check for blown fuses. Remember that a blown fuse is usually an indicator of an electrical short. You will need to find the cause of the short to bring the machine back to full working condition. The fuses in a machine all guard a particular section or voltage. One fuse may be for score displays while another is for solenoids and still another for the general lighting.
In replacing a fuse always make sure you are using the correct value, or amperage. The amperage of a fuse is stamped on the one of the electrical contacts of the fuse. DO NOT assume that the fuse in the machine is the value that should be used, always check the game manual or schematic to verify the correct rating. Someone repairing the game earlier may have put in a higher fuse value to circumvent an electrical problem. Do not swap out fast acting fuses for slow blow fuses, always use the correct rating and type.
Fast blow fuses can be easily checked visually, not so for slow blow fuses. Fast blow fuses, when blown, usually have a scorched appearance and the internal wire will be severed. Slow blow fuses will be intact. Close, visual examination will reveal that the rope looking conductor is twisted and shows defects when blown. The best way to check a slow-blow fuse is with a multi meter set to resistance mode. Place the probe on each side of the fuse. A slow-blow blown fuse will have a very high resistance, in the mega-ohm range.
Fuses can be located anywhere within the game. Often there is a bank of fuses in the bottom cabinet. Other fuses may be located on the underside of the playfield and more in the backbox. In solid state games, fuses can also be found on the individual circuit boards. Each fuse should have a label next to it indicating which fuse it is for reference in the schematic and game manual. Sometimes these labels have gone missing in the machine. If this is the case in your machine, mark the the board next to the fuse with a sharpie when you have correctly determined its label. It is also a good idea to write down the rating of the fuse next to the label.
Radio Shack still carries a good deal of fuses and values. When needing fuses, that is a good place to start. Always have a good stock of fuses on hand in your parts drawer.
Sometimes fuses can be difficult to remove from the machine. You can gently pry them free with a small screw driver, being careful not to pry on the glass part of the fuse, but instead on the metal sides. Insert the small screwdriver under the fuse in the fuse holder and pry. If you find that the fuse holder no longer has much spring, it needs to be replaced as it will not make good electrical contact. This can cause intermittent problems, which are the hardest to find.
9 Batteries
Batteries are the bane of electronic pinball machines. They are used to keep semi-conductor memories active, so things like high score and game settings are maintained while the power is off. Over time, they leak, and the battery acid (really a base, but let's not go there), oozes onto the electronic circuit board destorying the etches and components. Typically, when the batteries die, various error messages appear like a "factory settings restored" message when the machine is turned on.
Williams and Data East games use AA (LR6?) batteries, which should be replaced yearly. However, the best thing you can do is remotely mount the batteries, so if they do leak, they will not damage the circuit board. See how to make a remote battery holder for some ideas.
10 Lamps
Lamps are used throughout the machine to indicate game features, scoring, and to light the playfield. Lamps that illuminate the pinball playfield and backglass that are not part of the scoring are called General Illumination (GI) lamps. These lamps run on their own circuit and fuse and typically run around 6.3v AC.
As machines age, the lamps burn out and need replacement. Most lamps in a pinball machine are type 44 as installed at the factory. The 44's run hot and can cause burning over time to the adjacent wood or plastics. These can be replaced with type 47, which run cooler. Type 44 bulbs are brighter than the type 47.
I normally leave playfield scoring lights, particularly special bulbs, as type 44. I like those special lamps to be bright and stand out while playing the game.
When replacing bulbs they often can be difficult to remove due to their location. Lamps under the playfield can be removed by bending the lamp holder back to get access to the bulb. Burnt out lamps on the playfield can be accessed by removing the overlaying plastic piece. To remove really stubborn lamps, or ones that you can not grab use an old shooter tip. Place the shooter tip over the bulb and push and twist it out, installation is a reversal of removal.
Recessed Lamp | Installed shooter tip | Lamp removed. |
---|---|---|
Lamp to Replace | Shooter tip on bulb | Shooter Tip |
It is also a good idea to get a lamp socket cleaning tool. This tool is inserted into the lamp socket and rotated about to clean the socket connection. Some lamps and sockets can develop corrosion that needs to be cleaned or the socket replaced.