Difference between revisions of "The Shadow"
Jump to navigation
Jump to search
(Added link to Sanctum playfield wear repair guide) |
|||
| Line 25: | Line 25: | ||
#If you are having problems with the Battlefield area, make sure the IDC connector on the opto board hasn't been damaged. Also make sure to tidy the kicker coil wires neatly with a zip tie to avoid wire chaffing as the kicker moves side to side. | #If you are having problems with the Battlefield area, make sure the IDC connector on the opto board hasn't been damaged. Also make sure to tidy the kicker coil wires neatly with a zip tie to avoid wire chaffing as the kicker moves side to side. | ||
<br clear=all> | <br clear=all> | ||
| + | |||
| + | ==Repair Logs== | ||
| + | * [https://pinside.com/pinball/forum/topic/shadow-sanctum-repair-updated Repair guide] for the worn Sanctum magnet area on the playfield. | ||
Return to [[Williams WPC]] page. | Return to [[Williams WPC]] page. | ||
Revision as of 23:55, 28 June 2015
 |
| Manufacturer | System | Year | Model | Produced |
|---|---|---|---|---|
| Bally | WPC-Security | 1994 | 50032 | 4,247 |
The Shadow Playing Tips and Rule Sheet
1 WPC Specific Issues
2 Game-Specific Issues
- Fast shots to the lower phurba ramp diverted to the right sometimes get stuck because the switch wireform hangs the ball up. One way to fix this is to get a replacement microswitch with a long wire actuator, and bend it so the activation occurs much later down the wireform ramp (as shown in the picture at left).
- Make sure the correct autofire plunger is installed. The manual calls out part A-2306-A. This is incorrect. For much more consistent autofiring, use an A-17767.
- If you are having problems with the Battlefield area, make sure the IDC connector on the opto board hasn't been damaged. Also make sure to tidy the kicker coil wires neatly with a zip tie to avoid wire chaffing as the kicker moves side to side.
3 Repair Logs
- Repair guide for the worn Sanctum magnet area on the playfield.
Return to Williams WPC page.