Difference between revisions of "The Shadow"
(Added link to Sanctum playfield wear repair guide) |
|||
| Line 19: | Line 19: | ||
== Game-Specific Issues == | == Game-Specific Issues == | ||
| + | <b>Lower Phurba Microswitch</b><br> | ||
[[File:shadowswitch.jpg|200px|thumb|left|An alternate switch used to prevent ball hangups after exiting the left phurba to the right.]]<br> | [[File:shadowswitch.jpg|200px|thumb|left|An alternate switch used to prevent ball hangups after exiting the left phurba to the right.]]<br> | ||
| + | Fast shots to the lower phurba ramp diverted to the right sometimes get stuck because the switch wireform hangs the ball up. One way to fix this is to get a replacement microswitch with a long wire actuator, and bend it so the activation occurs much later down the wireform ramp (as shown in the picture at left). | ||
| + | <br clear=all> | ||
| − | + | <b>Autofire Plunger</b><br> | |
| − | + | Make sure the correct autofire plunger is installed. The manual calls out part A-2306-A. This is incorrect. For much more consistent autofiring, use an A-17767. | |
| − | + | ||
| + | <b>Mini Playfield Area Issues</b><br> | ||
| + | If you are having problems with the Battlefield area, make sure the IDC connector on the opto board hasn't been damaged. Also make sure to tidy the kicker coil wires neatly with a zip tie to avoid wire chaffing as the kicker moves side to side. | ||
| + | <br clear=all> | ||
| + | |||
| + | <b>Solenoid Table Incorrect in Manual</b><br> | ||
| + | [[File:CorrectShadowSolenoidTable.jpg|200px|thumb|left|The corrected Shadow solenoid table.]]<br> | ||
| + | The solenoid table listing in the manual for The Shadow shows incorrect wiring connections. The corrected table is shown on the left. | ||
<br clear=all> | <br clear=all> | ||
Revision as of 21:53, 15 February 2016
 |
| Manufacturer | System | Year | Model | Produced |
|---|---|---|---|---|
| Bally | WPC-Security | 1994 | 50032 | 4,247 |
The Shadow Playing Tips and Rule Sheet
1 WPC Specific Issues
2 Game-Specific Issues
Lower Phurba Microswitch
Fast shots to the lower phurba ramp diverted to the right sometimes get stuck because the switch wireform hangs the ball up. One way to fix this is to get a replacement microswitch with a long wire actuator, and bend it so the activation occurs much later down the wireform ramp (as shown in the picture at left).
Autofire Plunger
Make sure the correct autofire plunger is installed. The manual calls out part A-2306-A. This is incorrect. For much more consistent autofiring, use an A-17767.
Mini Playfield Area Issues
If you are having problems with the Battlefield area, make sure the IDC connector on the opto board hasn't been damaged. Also make sure to tidy the kicker coil wires neatly with a zip tie to avoid wire chaffing as the kicker moves side to side.
Solenoid Table Incorrect in Manual
The solenoid table listing in the manual for The Shadow shows incorrect wiring connections. The corrected table is shown on the left.
3 Repair Logs
- Repair guide for the worn Sanctum magnet area on the playfield.
Return to Williams WPC page.