The Shadow

Note: This page is a work in progress. Please help get it to a completed state by adding any useful information to it.

Manufacturer	System	Year	Model	Produced
Bally	WPC-Security	1994	50032	4,247

The Shadow Playing Tips and Rule Sheet

The Shadow Shop Guide

1 WPC Specific Issues

See WPC Specific Issues

2 Game-Specific Issues

Fast shots to the lower phurba ramp diverted to the right sometimes get stuck because of the switch wireform hanging the ball up. One way to fix this is to get a replacement microswitch with a long wire actuator, and bend it so the activation occurs much later down the wireform ramp, as shown in this photo: Media:shadowswitch.jpg

Make sure the right autofire plunger is fitted! In the manual it says to use part A-2306-A. This is incorrect, for much more consistent autofiring use an A-17767

If you are having problems with the Battlefield area, make sure the IDC connector on the opto board hasn't been damaged. Also make sure to cable tidy the kicker coil wires neatly to avoid the wires being chafed as the kicker moves around

Return to Williams WPC page.