Search results

Jump to navigation Jump to search

Page title matches

  • Modern pinball machines include test software, accessed through the coin door buttons. The diagnostics are powe
    163 bytes (23 words) - 21:25, 29 April 2011
  • Pinball test fixtures were designed to aid in the testing and repair of circuit boards i ...s lamps, solenoids, displays, switches, and sounds. There are also various test sequences available, plus the ability to perform repetitious tests in order
    26 KB (3,876 words) - 22:22, 5 July 2024
  • <font size="4">'''Documentation about pinball machine test-fixtures.'''</font> ...ly-Midway games . I'm adding extra connectors , that way i can connect and test Bally type -35/-17 CPU boards and the driver board.'''</font>
    2 KB (338 words) - 06:50, 18 May 2013
  • <font size="4">Adapted AID2 test-bord for CPU Bally and Stern.</font> ...d 5 extra's so it's easier to use and it's possible to run a more complete test on the selection-circuits of the rom/eprom chips. Further it's required tha
    15 KB (2,788 words) - 05:52, 24 April 2013
  • ...the signals you find on the memory chips when turning round on the memory test.'''</font> ...the memory..and you will of course also turn round and round on the memory test when you have a bad memory chip..'''</font>
    2 KB (384 words) - 05:36, 15 May 2013
  • <font size="6" color="#0000FF">'''Complete test bench for Bally -35 -17 CPU boards.'''</font> ...ch for the solenoid driver board and one for the lamp driver board The CPU test bench itself is again made of different parts.I did do this as i think it w
    44 KB (7,779 words) - 16:07, 25 April 2013
  • <font size="6" color="#0000FF">'''Universal driver boards test box.'''</font> <font size="3" color="#000000">'''Many years i use this type of test box , on my website it was announced in the artikel " Latest updates and ch
    26 KB (4,479 words) - 06:04, 8 May 2013
  • <font size="5">'''Extended Bally test method version 3.'''</font> ...then start and give you two flashes on the control led. Check the initial test method for information on how to connect the board.'''</font>
    11 KB (1,868 words) - 06:08, 24 April 2013

Page text matches

  • <font size="4">'''Documentation about pinball machine test-fixtures.'''</font> ...ly-Midway games . I'm adding extra connectors , that way i can connect and test Bally type -35/-17 CPU boards and the driver board.'''</font>
    2 KB (338 words) - 06:50, 18 May 2013
  • Use this page to test stuff before making it public.
    52 bytes (10 words) - 09:40, 21 April 2013
  • Modern pinball machines include test software, accessed through the coin door buttons. The diagnostics are powe
    163 bytes (23 words) - 21:25, 29 April 2011
  • ...hile in lamp test. The LEDs should alternate half on, half off during lamp test.]]
    733 bytes (127 words) - 13:11, 29 March 2015
  • <font size="4" color="#0000FF">'''Test eprom for Zaccaria sound boards last generation type 1B11178. '''</font> <font size="4" color="#0000FF">'''Universal test box for all CPU boards based on the CPU chip of the 68xx series, and the 26
    5 KB (752 words) - 07:24, 17 May 2013
  • ...ely next to the other), and which ones are also used in the solenoid board test (those which have an extra line on the board free). A difference with Leon' <font size="4">For the lamp board test, all leds are used. It's simple. </font>
    4 KB (758 words) - 07:22, 11 May 2013
  • ...the signals you find on the memory chips when turning round on the memory test.'''</font> ...the memory..and you will of course also turn round and round on the memory test when you have a bad memory chip..'''</font>
    2 KB (384 words) - 05:36, 15 May 2013
  • ==Rudy Test== ...e exception of the mouth, these other features are also tested in solenoid test.
    3 KB (533 words) - 06:28, 28 November 2019
  • <font size="5" color="#0000FF">'''Electronic test light = "Electronic "Probe"'''</font> ...page "Tips and Tricks " of my website I've already described how to make a test light. This did not use any electronic compontents, only 2 leds. Main disad
    3 KB (562 words) - 21:16, 25 April 2013
  • <font size="4">The cpu board, driver board, and special test-eprom which you can download here [[Image:pingreen.gif|link=File:L6LED.732. <font size="4">IC17 on the cpu is the special test eprom, which will generate a rythmic output on all outputs of PIA's which o
    5 KB (867 words) - 07:47, 11 May 2013
  • No on board test mode or switch. All tests are done via the game diagnostic. If speech isn ==Test Mode==
    8 KB (1,347 words) - 21:17, 29 June 2023
  • ...If any opto reports bad, the test will stop. You'll want to run the clock test for a couple of hours to be sure that you have knocked out all of the opto ...s of the circuit. Only about 20% of OPB804 will survive the extended clock test. Most of the rest will work for a little while before demonstrating inconsi
    3 KB (502 words) - 19:49, 5 June 2011
  • <!--Q1-->||100 Chime (3 in test) <!--Q2-->||10 Chime (1 in test)
    23 KB (4,135 words) - 07:48, 29 October 2019
  • ...ines tells us a lot about the switches . At start up the machine give us a test result , wich tells us witch switches do not work properly. '''</font> ...gnalling several switches from the same row or collum being bad, go to the test of the switch edges ( T1) . unplug connectors J206/J208 and J212 on the CPU
    3 KB (480 words) - 11:49, 21 April 2013
  • ===Several Solenoids Not Firing, But All Auxiliary Driver Board Fuses Test Fine===
    2 KB (276 words) - 11:37, 24 July 2021
  • ...stors are at the bottom side of the board. The little board is a universal test-board with parallel traces of each time 3 groups.'''</font> ...move the connector. The red wire goed to the 5 volt which can be found at test point 3 of the board.'''</font>
    6 KB (989 words) - 07:27, 11 May 2013
  • ...ure Spa, Space Invaders, Xenon, and Speakeasy. On the other hand, the self-test is different in some games. It will launch only a single beep, while the s <font size="5" color="#0000FF">'''The test .'''</font>
    10 KB (1,756 words) - 04:41, 26 April 2013
  • ...e solenoids outputs.So put the test eprom in the cpu and launch the normal test with the I/O connected..'''</font> ...s to monitor the outputs. This serie of leds are the same as I use for the test on the driver board of a good old Bally. I will repeat here how it is made'
    7 KB (1,189 words) - 07:59, 8 August 2014
  • ..._WPC_CPU_board_repairs]] '''Repair of WPC cpu board'''<br>'''Simple matrix test.'''<br><br> ...Pinaqua.gif|link=Leon_Borre_Universal_Driver_Board_Test_Box]] '''Universal test box for all driver boards - Bally, WPC, Zaccaria, lampdriver boards include
    14 KB (2,261 words) - 14:43, 26 October 2020
  • <font size="5">'''Extended Bally test method version 3.'''</font> ...then start and give you two flashes on the control led. Check the initial test method for information on how to connect the board.'''</font>
    11 KB (1,868 words) - 06:08, 24 April 2013

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)