Uploads by Barakandl
Jump to navigation
Jump to search
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 18:37, 26 April 2011 | BallySternSDBupgrades.jpg (file) |  |
1.87 MB | Upgrades done to a Bally Solenoid driver Board. Ties 5v test points together. Gives C23 and C26 common ground. There is a typo in the comments of the original picture. | 1 |
| 13:26, 1 May 2011 | Transistor Replacement.jpg (file) |  |
1.66 MB | Parts to replace / check when fixing transistor problems. | 1 |
| 18:14, 8 May 2011 | Batery damaged bally -17.jpg (file) |  |
1.77 MB | Bally -17 board with battery corrosion. This is fixable, but requires a lot of time replacing all the parts with battery guts on them. | 1 |
| 16:18, 12 May 2011 | Fixing Lamps.jpg (file) |  |
1.85 MB | Fix for corroded sockets. | 1 |
| 16:35, 12 May 2011 | Lamp Mounting Brackets.jpg (file) |  |
1.46 MB | Fixing connection issue with classic stern lamp mounting bracket | 1 |
| 16:47, 12 May 2011 | Mcr106 subbed for 2n5060.jpg (file) |  |
1.11 MB | MCR106 used in place a 2n5060. Top and middle leg need to be reversed. This is not recommended only if you do not have a 2n5060. | 1 |
| 18:09, 10 June 2011 | Bally Rectifier board -54 component side,jpg.jpg (file) |  |
1.48 MB | Component side of the -54 rectifier board. | 1 |
| 17:54, 5 September 2011 | Leaking Battery.jpg (file) |  |
406 KB | AA battery leaking its corrosive guts. | 1 |
| 14:58, 29 October 2011 | Corrosion Cleaned MPU.JPG (file) |  |
2.12 MB | added signature | 1 |
| 19:43, 17 February 2012 | Lamp board battery corrosion.jpg (file) |  |
1.14 MB | Bally lamp board attacked by battery corrosion. | 1 |
| 18:25, 9 March 2012 | R113 and R16 on bally -35.jpg (file) |  |
1.91 MB | R113 and R16 can fail and cause the 7th flash test to fail. If you have 43v but no 7th flash, check these resistors. | 1 |
| 22:16, 10 March 2012 | Bally -49 rectifier board.jpg (file) |  |
1.37 MB | 1 |
