Uploads by Kencaine
Jump to navigation
Jump to search
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 09:36, 23 April 2011 | CoinDoor.png (file) |  |
409 KB | Typical coin door (Haunted House) | 1 |
| 09:54, 23 April 2011 | OpenDoor.png (file) |  |
499 KB | 1 | |
| 09:54, 23 April 2011 | Opened.png (file) |  |
467 KB | 1 | |
| 19:24, 23 April 2011 | PowerSupply.png (file) |  |
354 KB | This is an old computer power supplied used for bench testing a Gottlieb System 80 mpu board. | 1 |
| 19:24, 23 April 2011 | MPUPower.png (file) |  |
347 KB | The J1 connector with the + and - connections shown. | 1 |
| 18:09, 30 April 2011 | Lamp1.png (file) |  |
195 KB | This is a lamp that needs replaced. Note that it is in a recessed area of the backbox. | 1 |
| 18:11, 30 April 2011 | Lamp2.png (file) |  |
307 KB | This is a lamp with the shooter tip installed, ready to be removed. | 1 |
| 18:12, 30 April 2011 | Lamp.png (file) |  |
71 KB | Lamp with a shooter tip installed. | 1 |
| 18:50, 30 April 2011 | Slammod.png (file) |  |
411 KB | System 80 slam switch solder bridge. | 1 |
| 16:11, 7 May 2011 | OldandWorn.jpg (file) |  |
570 KB | Old and worn pop bumper to be restored. Notice the wear on the mylar shield. | 1 |
| 16:21, 7 May 2011 | RemoveCap.jpg (file) |  |
504 KB | Removing the pop bumper cap. | 1 |
| 16:24, 7 May 2011 | UnscrewBase.jpg (file) |  |
548 KB | 1 | |
| 16:35, 7 May 2011 | UnderA.jpg (file) |  |
660 KB | Unerside pop bumper anatomy. | 1 |
| 16:41, 7 May 2011 | UnderB.jpg (file) |  |
666 KB | 1 | |
| 16:44, 7 May 2011 | UnderC.jpg (file) |  |
557 KB | 1 | |
| 16:48, 7 May 2011 | PlungerA.jpg (file) |  |
430 KB | 1 | |
| 16:51, 7 May 2011 | UnderD.jpg (file) |  |
145 KB | 1 | |
| 16:53, 7 May 2011 | LampA.jpg (file) |  |
531 KB | 1 | |
| 16:56, 7 May 2011 | MessA.jpg (file) |  |
552 KB | 1 | |
| 17:08, 7 May 2011 | UnderE.jpg (file) |  |
439 KB | 1 | |
| 17:09, 7 May 2011 | Shield.jpg (file) |  |
438 KB | 1 | |
| 17:18, 7 May 2011 | UnderF.jpg (file) |  |
572 KB | 1 | |
| 17:24, 7 May 2011 | UnderG.jpg (file) |  |
544 KB | 1 | |
| 17:30, 7 May 2011 | UnderH.jpg (file) |  |
589 KB | 1 | |
| 17:34, 7 May 2011 | UnderI.jpg (file) |  |
566 KB | 1 | |
| 17:40, 7 May 2011 | UnderJ.jpg (file) |  |
545 KB | 1 | |
| 17:42, 7 May 2011 | PlungerB.jpg (file) |  |
484 KB | 1 | |
| 17:44, 7 May 2011 | UnderK.jpg (file) |  |
515 KB | 1 | |
| 21:11, 31 December 2012 | GTBVariTargetBelow.jpg (file) |  |
233 KB | Vari-Target from below the playfield. | 1 |
| 12:41, 30 December 2015 | GTBBallCountStart.mpg (file) |  |
1.49 MB | Ball count unit going from game over to first ball ready to launch. Sequence is from Gottlieb® Big Hit. | 1 |
| 15:30, 13 November 2024 | Suction Cup Pinball.jpg (file) |  |
660 KB | Use of a suction cup to help removing the playfield glass. Can also be used to remove the backglass. | 1 |
