Uploads by Newmantjn
Jump to navigation
Jump to search
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 21:19, 26 April 2011 | Volleydrop 002.jpg (file) |  |
1.47 MB | Drop Target Bank Removed from Game | 1 |
| 21:35, 26 April 2011 | Volly done 007.jpg (file) |  |
1.88 MB | Reverted to version as of 03:16, 27 April 2011 | 1 |
| 21:46, 26 April 2011 | Volleydrop004.jpg (file) |  |
1.51 MB | Drop Target Bank, ready for the cleaner | 1 |
| 18:48, 27 April 2011 | Volleydrop 001.jpg (file) |  |
303 KB | Drop target banks | 1 |
| 18:49, 27 April 2011 | Volleydrop003.jpg (file) |  |
1.52 MB | Drop target first stage disassembly | 1 |
| 19:40, 27 April 2011 | Volleydrop005.jpg (file) |  |
1.55 MB | Target Bank in the Ultrasonic Cleaner | 1 |
| 19:43, 27 April 2011 | Volleydrop006.jpg (file) |  |
1.56 MB | Target Bank Cleaned, Dry and Ready for Reassembly | 1 |
| 21:11, 27 April 2011 | Volleydrop007.jpg (file) |  |
1.67 MB | Drop in the targets and attach the springs to the targets. | 1 |
| 19:16, 28 April 2011 | Volleydrop008.jpg (file) |  |
1.15 MB | All Springs in Place | 1 |
| 19:17, 28 April 2011 | Volleydrop009.jpg (file) |  |
1.13 MB | All Triggers and Springs in Place - Another View | 1 |
| 20:11, 28 April 2011 | Volleydrop010.jpg (file) |  |
1.37 MB | Reset Arm Installed | 1 |
| 20:15, 28 April 2011 | Volleydrop011.jpg (file) |  |
1.51 MB | Another Shot of the Reset Arm Installation | 1 |
| 20:16, 28 April 2011 | Volleydrop012.jpg (file) |  |
1.39 MB | Back on | 1 |
| 20:17, 28 April 2011 | Volleydrop014.jpg (file) |  |
1.22 MB | All Done | 1 |
| 17:55, 10 May 2011 | RatTrapAfterDegrease.jpg (file) |  |
1.01 MB | Circuit Board After Mean Grean Degreasing | 1 |
| 17:57, 10 May 2011 | RatTrapLovinIt.jpg (file) |  |
848 KB | The Iconic Rat Trap Score Reel. Where engineering and art intersect. | 1 |
| 18:06, 10 May 2011 | RatTrapGroundWheelAssy.jpg (file) |  |
1.62 MB | The Grounding Wheel Assembly | 1 |
| 18:11, 10 May 2011 | RatTrapGroundWheelPokaYoke.jpg (file) |  |
1.49 MB | Poka-Yoke assembly feature on the ground wheel | 1 |
| 18:18, 10 May 2011 | RatTrapScrews.jpg (file) |  |
949 KB | Score Reel Removal | 1 |
| 18:20, 10 May 2011 | RatTrapRemoval.JPG (file) |  |
1.06 MB | Score Reel Assembly Removal | 1 |
| 20:03, 10 May 2011 | RatTrapCamandEclip.jpg (file) |  |
1.27 MB | Remove the E clip that retains the Cam and Ratchet Hub Assembly | 1 |
| 20:10, 10 May 2011 | RatTrapCircuitBoardRemoval.jpg (file) |  |
1.21 MB | Remove the two bottom screws | 1 |
| 20:12, 10 May 2011 | RatTrapDesolder.jpg (file) |  |
1.17 MB | Desolder the wire to enable the board to swing out of the way. | 1 |
| 20:13, 10 May 2011 | RatTrapBoardAway.jpg (file) |  |
1.16 MB | Swing Board out of the way | 1 |
| 08:14, 11 May 2011 | RatTrapCoilParts.jpg (file) |  |
907 KB | Used parts from the coil assembly. Remove the coil by unscrewing the two screws holding the coil stop on. | 1 |
| 08:22, 11 May 2011 | RatTrapStepUp.jpg (file) |  |
1.28 MB | Step Up Pawl removed. | 1 |
| 08:42, 11 May 2011 | RatTrapRachetandPawl2.jpg (file) |  |
1.24 MB | Ratchet and Pawl Removal | 1 |
| 09:11, 11 May 2011 | RatTrapStripped.jpg (file) |  |
1,008 KB | Rat Trap Score Reel Assembly, Fully Stripped | 1 |
| 07:45, 13 May 2011 | RatTrapCircuitBoardInitialClean.jpg (file) |  |
1.54 MB | Initial Cleaning Done with Synthetic Steel Wool and Mean Green | 1 |
| 07:54, 13 May 2011 | RatTrap600Grit.jpg (file) |  |
1.37 MB | Sand with 600 Wet or Dry and Alcohol | 1 |
| 07:55, 13 May 2011 | RatTrapAfterSanding.jpg (file) |  |
1.19 MB | Circuit Board After Light Sanding | 1 |
| 07:57, 13 May 2011 | RatTrapTeflon.jpg (file) |  |
1.23 MB | Use Superlube or a Similar Dielectric Grease - Use Sparingly | 1 |
| 08:22, 15 May 2011 | RatTrapMeanGreen.jpg (file) |  |
1.33 MB | Hose the parts down with Mean Green | 1 |
| 08:24, 15 May 2011 | RatTrapBottleBrush1.jpg (file) |  |
1.14 MB | Clean out the Holes with a Bottle Brush | 1 |
| 08:27, 15 May 2011 | RatTrapUltrasonic.jpg (file) |  |
1.44 MB | Parts in the Harbor Freight Ultrasonic Cleaner | 1 |
| 08:31, 15 May 2011 | RatTrapReelCleaningSupplies 033.jpg (file) |  |
1.14 MB | Cleaning Supplies Used for Score Reels | 1 |
| 08:37, 15 May 2011 | RatTrapReelCleaning.jpg (file) |  |
1.34 MB | Clean the Number Surface with Novus 2 | 1 |
| 08:42, 15 May 2011 | RatTrapCleanInsideReel.jpg (file) |  |
1.23 MB | Clean the Inside with Novus or a Rag Moistened with Mean Green | 1 |
| 08:47, 15 May 2011 | RatTrapCoilNewParts.jpg (file) |  |
687 KB | Replacement Parts for the Coil and Plunger | 1 |
| 08:50, 15 May 2011 | RatTrapCoilStopReplacement.jpg (file) |  |
1.12 MB | Replacing the Coil Stop | 1 |
| 08:56, 15 May 2011 | RatTrapMoreSwitches.jpg (file) |  |
1.85 MB | Some Score Reels Have More Switches than Others | 1 |
| 12:50, 23 May 2011 | RatTrapStepUpPawlInstall.jpg (file) |  |
1.43 MB | Install the Stepup Pawl | 1 |
| 12:54, 23 May 2011 | RatTrapDriveIndexPawlAssembly2.jpg (file) |  |
1.36 MB | Install the Drive Index Pawl Assembly, spring and E clip | 1 |
| 12:55, 23 May 2011 | RatTrapRatchetandCamAssy.jpg (file) |  |
1.5 MB | 3.Install the Cam and Ratchet Hub | 1 |
| 13:00, 23 May 2011 | RatTrapCoilandPlungerAssy.jpg (file) |  |
1.4 MB | Assemble the Plunger and Coil | 1 |
| 13:04, 23 May 2011 | RatTrapCircuitBoardAssy.jpg (file) |  |
1.29 MB | Install the Circuit Board | 1 |
| 13:07, 23 May 2011 | RatTrapScoreWheelAssy.jpg (file) |  |
1.34 MB | Install the Score Reel | 1 |
| 20:45, 25 May 2011 | Coil Sleeves.pdf (file) |  |
7 KB | What fits what coil sleeve chart | 1 |
| 14:25, 17 November 2011 | StartingPoint.jpg (file) |  |
232 KB | A typical power cord which requires replacing | 1 |
| 14:29, 17 November 2011 | PowerCordHookUp.jpg (file) |  |
225 KB | The hook up for a two pronged, polarized line cord. Note that the ribbed side goes to the transformer. | 1 |
