Difference between revisions of "Raspberry Pi P-ROC setup guide"

From PinWiki
Jump to navigation Jump to search
(page cleanup)
 
Line 1: Line 1:
−
Using a Raspberry Pi with P-ROC is not much different than using any other Linux OS. Using the directions on the [http://pinballcontrollers.com/wiki/Linux_build_instructions Linux Build Instructions] page should result in a fully-functional environment (keeping in mind that the Raspberry Pi is a pretty under-powered device in general).
+
See [[Hardware Control Systems]]
−
 
 
−
You can also download and use the [http://missionpinball.com/2014/04/28/linux-installer-script-for-libpinproc-and-pypinproc/ debian toolkit] to automatically install everything from the dependencies through libpinproc, pypinproc, and pyprocgame.
 
−
 
 
−
The model of Raspberry pi tested was a Model B, Rev 2. The OS used is Raspbian, which is available from [http://downloads.raspberrypi.org/raspbian_latest http://downloads.raspberrypi.org/raspbian_latest]. The specific version of Raspbian used for this test is based on Debian Wheezy. Any other versions (updates or old versions) might change things.
 
−
 
 
−
Copying the image to your Raspberry Pi can be accomplished by following the instructions provided on the same download page, or just follow these links:
 
−
 
 
−
[http://www.raspberrypi.org/documentation/installation/installing-images/linux.md Install from Linux]
 
−
 
 
−
[http://www.raspberrypi.org/documentation/installation/installing-images/mac.md Install from Mac]
 
−
 
 
−
[http://www.raspberrypi.org/documentation/installation/installing-images/windows.md Install from Windows]
 
−
 
 
−
Once this process is complete, run through initial setup process. Then [[Linux_build_instructions | start building the pinproc components!]]
 

Latest revision as of 09:27, 5 February 2016

See Hardware Control Systems

Retrieved from "https://www.pinwiki.com/wiki/index.php?title=Raspberry_Pi_P-ROC_setup_guide&oldid=15242"