Difference between revisions of "White Water"
Jump to navigation
Jump to search
(Created page with "=White Water= '''Ball hangs on "lip" of reproduction ramp between Spine Chiller ramp exit and upper playfield''' :The reproduction ramps from Pinball Inc are excellent. Some Sp...") |
|||
| Line 1: | Line 1: | ||
| − | |||
| − | |||
'''Ball hangs on "lip" of reproduction ramp between Spine Chiller ramp exit and upper playfield''' | '''Ball hangs on "lip" of reproduction ramp between Spine Chiller ramp exit and upper playfield''' | ||
Revision as of 23:00, 6 May 2011
Ball hangs on "lip" of reproduction ramp between Spine Chiller ramp exit and upper playfield
- The reproduction ramps from Pinball Inc are excellent. Some Spine Chiller ramps finished manufacture with an almost undetectable "lip" at the exit point of the ramp. Prior to installation, use an Exacto knife or similar to slice that lip off.
Ball sits in "dimple" under "lock-to-upper-playfield" VUK
- After thousands of landings from the VUK onto the same upper playfield spot, the playfield becomes dimpled. The ball will sit in that dimple until shaken loose or until another ball emerges from the VUK (as in multi-ball). A "Cliffy" protector will solve this problem quite elegantly. [1]
Ball spins backwards after being launched up the "lock-to-upper-playfield" VUK
- Sometimes, the ball will "backspin" after being ejected from the upper VUK, slowing gameplay. Install one (perhaps two) rubber post rings (or rubber grommets) as pictured here: [2]