Difference between revisions of "Monopoly"

From PinWiki
Jump to navigation Jump to search
 
(5 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
'''<u>Playfield Electric Company Display</u>'''
 
'''<u>Playfield Electric Company Display</u>'''
[[File:SternMonopolyElectricCompanyRear.jpg ‎|300px|thumb|right|Rear view of the TV PCB board, showing the circuit layout.]]
+
[[File:SternMonopolyElectricCompanyRear.jpg ‎|300px|thumb|right|Rear view of the PCB board, showing the circuit layout. Note that pin 10 of the rightmost 74ACT574 has broken off the chip. Pin 10 is supposed to be lifted from the PCB, the trace leading to it cut, and a 1Kohm resistor soldered from pin 1 of the adjacent 74ACT574 to the right most 74ACT574.]]
[[File:SternMonopolyElectricCompanyFront.jpg|300px|thumb|left|Front view of the TV PCB board.]]<br>
+
[[File:SternMonopolyElectricCompanyFront.jpg|300px|thumb|left|Front view of the PCB board.]]<br>
 
The part number for the 5x7 "red only" LED blocks is <b>GMA8875C</b> made by On Semi/Fairchild. The part is no longer manufactured and is obsolete.  
 
The part number for the 5x7 "red only" LED blocks is <b>GMA8875C</b> made by On Semi/Fairchild. The part is no longer manufactured and is obsolete.  
  
An alternate part that Stern used and labeled the side of the block is <b>LTP1557AC</b> which is made by LiteOn. The datasheet for this LED block can be found [https://www.pinwiki.com/wiki/images/6/69/LTP-1557AC-1175408.pdf <b><u>here</u></b>].
+
An alternate part that Stern used and is labeled on the side of the block is <b>LTP1557AC</b> which is made by LiteOn. The datasheet for this LED block can be found [https://www.pinwiki.com/wiki/images/6/69/LTP-1557AC-1175408.pdf <b><u>here</u></b>].
 +
 
 +
The resistor that appears to be a "hack" was a factory modification and is shown on the schematics.<br><br>
 +
The schematics for this board are identical to the Roller Coaster Tycoon schematics even though the RCT display panel orients the blocks rotated 90 degrees. The schematics can be found [https://www.pinwiki.com/wiki/images/5/51/LEDBlockDisplaySchematics.pdf <b><u>here</b></u>].
 +
<br clear=all>
 +
 
 +
[[File:ElectricCompanyRevBFront.jpg ‎‎|300px|thumb|left|Revision B]]
 +
[[File:ElectricCompanyRevBBack.jpg ‎‎|300px|thumb|right|Revision B]]<br>
 +
Revision B of this board integrated the "hacked on" resistor as R35, in the center of the board.
 +
<br clear=all>

Latest revision as of 11:44, 13 July 2023

Playfield Electric Company Display

Rear view of the PCB board, showing the circuit layout. Note that pin 10 of the rightmost 74ACT574 has broken off the chip. Pin 10 is supposed to be lifted from the PCB, the trace leading to it cut, and a 1Kohm resistor soldered from pin 1 of the adjacent 74ACT574 to the right most 74ACT574.
Front view of the PCB board.


The part number for the 5x7 "red only" LED blocks is GMA8875C made by On Semi/Fairchild. The part is no longer manufactured and is obsolete.

An alternate part that Stern used and is labeled on the side of the block is LTP1557AC which is made by LiteOn. The datasheet for this LED block can be found here.

The resistor that appears to be a "hack" was a factory modification and is shown on the schematics.

The schematics for this board are identical to the Roller Coaster Tycoon schematics even though the RCT display panel orients the blocks rotated 90 degrees. The schematics can be found here.

Revision B
Revision B


Revision B of this board integrated the "hacked on" resistor as R35, in the center of the board.