Pinball Part Datasheets

1 Optoelectronics

Part Number	Type	Package	Datasheet Link	Typical Uses
QED123	IR emitter	T1-3/4	http://www12.fairchildsemi.com/ds/QE/QED123.pdf	WPC, GTB Sys3
QSD724	IR Receiver	T1-3/4	http://datasheet.octopart.com/QSD724-Fairchild-datasheet-8132.pdf	WPC original
QSD124	IR Receiver	T1-3/4	http://www.fairchildsemi.com/ds/QS/QSD124.pdf	WPC substitute, GTB Sys3

2 UVEPROMs

Part Number	Description	Package	Datasheet Link
2716	2Kx8	DIP-24	http://www.datasheetarchive.com/pdf-datasheets/Datasheets-14/DSA-276496.html
2532	4Kx8	DIP-24	http://pdf1.alldatasheet.com/datasheet-pdf/view/103331/TI/TMS2532.html

3 Transistors

Part Number	Type	Volts	Amps	Package	Datasheet Link	Typical Uses
TIP-102	NPN	100V	8A	TO-220	http://www.fairchildsemi.com/ds/TI/TIP100.pdf	Solenoids, flashers and lamp matrix low side. Use in place of TIP 120 (a TIP102 more robust).
TIP-107	NPN	100V	8A	TO-220	http://www12.fairchildsemi.com/ds/TI/TIP105.pdf	Lamp matrix high side
TIP-36C	PNP	100V	25A	TO-247	http://www.st.com/stonline/books/pdf/docs/5071.pdf	Flippers; high power solenoid
MPS-A13	NPN	30V	1.2A	TO-92	http://www.fairchildsemi.com/ds/MP/MPSA13.pdf	Gottlieb Sys80 Driver Board
IRL540	N FET	100V	28A	TO-220	http://www.irf.com/product-info/datasheets/data/irl540ns.pdf	Stern (replacement) flashers, solenoids, lamp matrix low side
22NE10L	N FET	100V	22A	TO-220	http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00001959.pdf	Stern flashers, solenoids, lamp matrix low side
2N5401	PNP	150V	0.6A	TO-92	http://www.onsemi.com/pub_link/Collateral/2N5401-D.PDF	switch/lamp matrix
2N6039	NPN Darlington	80V	4A	TO-225	http://www.onsemi.com/pub_link/Collateral/2N6035-D.PDF	lamp matrix
New entry	Type	xxV	xxA	TO-	Put link here	Purpose

4 Integrated Circuits

Integrated circuits (ICs) in older SS machines are usually Dual-Inline (DIP) packages. Part numbers for ICs may have prefixes and suffixes that specify details about the part. For example, SN74LS244N is a 74LS244 device. SN indicates the manufacturer (Texas Instruments) and N indicates a 20-pin DIP package. The package type suffix may vary by manufacturer. Some parts may have additional suffixes that indicate the temperature range of the part.

For information on TTL part numbering see 7400 Series Wikipedia article section on "Part Numbering Schemes".

Part	Description	Package	Type	Datasheet Link	Typical Uses
AD7524	8 Bit CMOS Multiplying DAC	DIP-16	Does not apply	http://www.datasheetcatalog.org/datasheet/analogdevices/888358036ad7524.pdf
74LS155	1-of-4 Decoder/Multiplexer	DIP-16	Low Power Schottky	http://www.datasheetcatalog.org/datasheet/motorola/SN54LS156J.pdf
74LS175	Quad D-Type Flip-Flop	DIP-16	Low Power Schottky	http://www.datasheetcatalog.org/datasheets/90/375472_DS.pdf
74LS244	Octal 3-State Buffer / Line Driver / Line Receiver	DIP-20	Low Power Schottky	http://www.datasheetcatalog.org/datasheets/70/375527_DS.pdf
74LS374	Octal 3-State D-Type Flip-Flop	DIP-20	Low Power Schottky	http://www.datasheetcatalog.org/datasheets/90/375622_DS.pdf
LM324	Quad OP-Amp	DIP-14	Does not apply	http://www.datasheetcatalog.org/datasheet/fairchild/LM324.pdf ||
LM339	Quad Comparator	DIP-14	Does not apply	http://www.national.com/ds/LM/LM339.pdf%7C%7C WPC Opto Controller Board and WPC CPU Switch Matrix||
ULN2803	Octal Darlington Transistor Array	DIP-18	Does not apply	http://www.datasheetcatalog.org/datasheet/motorola/ULN2804A.pdf%7C%7C
Part	Description	Package	Type	Put link here	Purpose

4.1 4000 Series CMOS ICs

A descriptive list of 4000 series chips along with datasheet links is available here.

4.2 7400 Series ICs

A descriptive list of 7400 series chips is available here.