Difference between revisions of "EM / SS Pinball Comparison"
Jump to navigation
Jump to search
m |
|||
| Line 8: | Line 8: | ||
!Late SS / DMD | !Late SS / DMD | ||
|- | |- | ||
| − | | Ball Time || Short, design is about 30 seconds per ball || Games tend to | + | | Ball Time || Short, design is about 30 seconds per ball || Games tend to have longer ball times |
|- | |- | ||
|Speed || Slower, playfield slope about 3.5 degrees (1) || Fast, playfield slope about 6.5 degrees | |Speed || Slower, playfield slope about 3.5 degrees (1) || Fast, playfield slope about 6.5 degrees | ||
| Line 24: | Line 24: | ||
|Lights || On, Off, When-Lit, and blinking || Broad range of light shows and attract modes | |Lights || On, Off, When-Lit, and blinking || Broad range of light shows and attract modes | ||
|- | |- | ||
| − | |Display || Light up or | + | |Display || Light up, mechanical, or motorized score reels || Vacuum fluorescent or gas plasma numeric, alphanumeric, dot matrix |
|- | |- | ||
| − | |Theme || | + | |Theme || Less licensed themes (Capt. Fantastic, Close Encounters, etc.) and more original themes || Less original themes and more licensed themes |
|- | |- | ||
|Artwork || Original artwork || Trend toward photo-realistic art, less spot-color screen printing, art sometimes dictated by licensee | |Artwork || Original artwork || Trend toward photo-realistic art, less spot-color screen printing, art sometimes dictated by licensee | ||
| Line 36: | Line 36: | ||
|Repair || Rarely need parts replacement other than maintenance || Transistor replacement on driver boards | |Repair || Rarely need parts replacement other than maintenance || Transistor replacement on driver boards | ||
|- | |- | ||
| − | |Longevity || Could still be working 100 years from now || | + | |Longevity || Could still be working 100 years from now || Obsolescence of electronic components is common |
|} | |} | ||
(1) Later EMs can have fast play if they are set up and adjusted correctly. | (1) Later EMs can have fast play if they are set up and adjusted correctly. | ||
Revision as of 13:41, 3 December 2011
The table below provides a very general comparison of Electro-Mechanical and Solid State pinball machines. Like all generalizations there are many exceptions. During the change-over from EM to SS in the late 1970s the new machines were not that different from a look and play point-of-view. The goal here is to capture the common cases of comparison between a 70s EM/early SS machine and late SS / 90s DMD or later machines.
This table summarizes an RGP discussion started on 11/29/2011 by Kirkd2.
| Category | Late EM / Early SS | Late SS / DMD |
|---|---|---|
| Ball Time | Short, design is about 30 seconds per ball | Games tend to have longer ball times |
| Speed | Slower, playfield slope about 3.5 degrees (1) | Fast, playfield slope about 6.5 degrees |
| Randomness | The ball is wild | Controllable shots, many machines have shots that return the ball to a flipper |
| Game play | No memory from ball-to-ball for multi-player machines | Player state tracked from ball-to-ball |
| Objectives | Easy to understand, difficult to master | Deep rule sets, complete missions or goals |
| New Players | Easy to see game objectives | Often overwhelmed |
| Sounds | Mechanical bells, chimes, and score reels | Broad range of electronic sounds, including voice and high-quality music |
| Lights | On, Off, When-Lit, and blinking | Broad range of light shows and attract modes |
| Display | Light up, mechanical, or motorized score reels | Vacuum fluorescent or gas plasma numeric, alphanumeric, dot matrix |
| Theme | Less licensed themes (Capt. Fantastic, Close Encounters, etc.) and more original themes | Less original themes and more licensed themes |
| Artwork | Original artwork | Trend toward photo-realistic art, less spot-color screen printing, art sometimes dictated by licensee |
| Playfield | High-quality multi-color screen printing | Lower-quality dithered color screen printing |
| Maintenance | No diagnostics, need to trace problem on schematics | Built-in diagnostic modes |
| Repair | Rarely need parts replacement other than maintenance | Transistor replacement on driver boards |
| Longevity | Could still be working 100 years from now | Obsolescence of electronic components is common |
(1) Later EMs can have fast play if they are set up and adjusted correctly.