Difference between revisions of "Mattel"
Jump to navigation
Jump to search
Ken Layton (talk | contribs) |
Ken Layton (talk | contribs) |
||
| Line 33: | Line 33: | ||
<br clear=all> | <br clear=all> | ||
| − | You can also use these Marco Specialties parts along with two 6-32 wing nuts to make a complete assembly: | + | You can also use these Marco Specialties parts along with two 6-32 wing nuts to make a complete tilt assembly: |
(1) # 04-10346 and (1) # 20-6502-A | (1) # 04-10346 and (1) # 20-6502-A | ||
Revision as of 09:13, 19 April 2012
 |
1 Introduction
Mattel Electronics manufactured one model of electronic home model pinball machine.
2 Games
- Las Vegas, 1977, 4 players
3 Technical Info
Mattel issued two manuals for "Las Vegas" pinball, an owner's manual and a service/parts manual.
Owner's Manual is available to download here: http://mattelhomepin.blogspot.com/p/users-manual.html
4 Problems and Solutions
4.1 Power Problems
4.2 Solenoid Problems
4.3 Lamp Problems
4.4 Switch Problems
The original "ball and chain" tilt assembly is very flimsy and not very good. It is suggested to replace it with a Williams # A-15361 Tilt Assembly for much better operation since it uses standardized parts.
You can also use these Marco Specialties parts along with two 6-32 wing nuts to make a complete tilt assembly:
(1) # 04-10346 and (1) # 20-6502-A