Difference between revisions of "The Shadow"
Jump to navigation
Jump to search
(→Game-Specific Issues: Shadow autofire fix) |
|||
| Line 24: | Line 24: | ||
:Make sure the right autofire plunger is fitted! In the manual it says to use part A-2306-A. This is incorrect, for much more consistent autofiring use an A-17767 | :Make sure the right autofire plunger is fitted! In the manual it says to use part A-2306-A. This is incorrect, for much more consistent autofiring use an A-17767 | ||
| + | :If you are having problems with the Battlefield area, make sure the IDC connector on the opto board hasn't been damaged. Also make sure to cable tidy the kicker coil wires neatly to avoid the wires being chafed as the kicker moves around | ||
<BR><BR> | <BR><BR> | ||
Return to [[Williams WPC]] page. | Return to [[Williams WPC]] page. | ||
Revision as of 17:08, 7 October 2012
 |
| Manufacturer | System | Year | Model | Produced |
|---|---|---|---|---|
| Bally | WPC-Security | 1994 | 50032 | 4,247 |
The Shadow Playing Tips and Rule Sheet
1 WPC Specific Issues
2 Game-Specific Issues
- Fast shots to the lower phurba ramp diverted to the right sometimes get stuck because of the switch wireform hanging the ball up. One way to fix this is to get a replacement microswitch with a long wire actuator, and bend it so the activation occurs much later down the wireform ramp, as shown in this photo: Media:shadowswitch.jpg
- Make sure the right autofire plunger is fitted! In the manual it says to use part A-2306-A. This is incorrect, for much more consistent autofiring use an A-17767
- If you are having problems with the Battlefield area, make sure the IDC connector on the opto board hasn't been damaged. Also make sure to cable tidy the kicker coil wires neatly to avoid the wires being chafed as the kicker moves around
Return to Williams WPC page.