Difference between revisions of "The Shadow"

From PinWiki
Jump to navigation Jump to search
Line 20: Line 20:
 
== Game-Specific Issues ==
 
== Game-Specific Issues ==
  
:Fast shots to the lower phurba ramp diverted to the right sometimes get stuck because of the switch wireform hanging the ball up.  One way to fix this is to get a replacement microswitch with a long wire actuator, and bend it so the activation occurs much later down the wireform ramp, as shown in this photo: [[Media:shadowswitch.jpg]]
+
#Fast shots to the lower phurba ramp diverted to the right sometimes get stuck because of the switch wireform hanging the ball up.  One way to fix this is to get a replacement microswitch with a long wire actuator, and bend it so the activation occurs much later down the wireform ramp, as shown in this photo: [[Media:shadowswitch.jpg]]
 
+
#Make sure the correct autofire plunger is installed. The manual calls out part A-2306-A.  This is incorrect. For much more consistent autofiring, use an A-17767.
:Make sure the right autofire plunger is fitted!  In the manual it says to use part A-2306-A.  This is incorrect, for much more consistent autofiring use an A-17767  
+
#If you are having problems with the Battlefield area, make sure the IDC connector on the opto board hasn't been damaged.  Also make sure to tidy the kicker coil wires neatly with a zip tie to avoid wire chaffing as the kicker moves side to side.
 
+
<br>
:If you are having problems with the Battlefield area, make sure the IDC connector on the opto board hasn't been damaged.  Also make sure to cable tidy the kicker coil wires neatly to avoid the wires being chafed as the kicker moves around
 
<BR><BR>
 
 
Return to [[Williams WPC]] page.
 
Return to [[Williams WPC]] page.

Revision as of 21:41, 7 October 2012

ExclamationPoint.jpg
Note: This page is a work in progress. Please help get it to a completed state by adding any useful information to it.


Manufacturer System Year Model Produced
Bally WPC-Security 1994 50032 4,247


The Shadow Playing Tips and Rule Sheet

The Shadow Shop Guide


1 WPC Specific Issues

See WPC Specific Issues

2 Game-Specific Issues

  1. Fast shots to the lower phurba ramp diverted to the right sometimes get stuck because of the switch wireform hanging the ball up. One way to fix this is to get a replacement microswitch with a long wire actuator, and bend it so the activation occurs much later down the wireform ramp, as shown in this photo: Media:shadowswitch.jpg
  2. Make sure the correct autofire plunger is installed. The manual calls out part A-2306-A. This is incorrect. For much more consistent autofiring, use an A-17767.
  3. If you are having problems with the Battlefield area, make sure the IDC connector on the opto board hasn't been damaged. Also make sure to tidy the kicker coil wires neatly with a zip tie to avoid wire chaffing as the kicker moves side to side.


Return to Williams WPC page.