Difference between revisions of "User talk:Jimpal"

From PinWiki
Jump to navigation Jump to search
m
 
(8 intermediate revisions by 2 users not shown)
Line 4: Line 4:
 
I can't recall seeing double switches on the pops, but I know that I had to change out a zener on one of the spec. sol. trigger lines.  I can't comment about the slings, as I did not have work on them.  This was on a call back in Nov., so things are a tad hazy, but I do remember the shorted zener.  Not certain until more data is collected, but it seems like there may be some inconsistencies here.  One game did this, while the other did this.  That wouldn't be a first for WMS though. - Jim
 
I can't recall seeing double switches on the pops, but I know that I had to change out a zener on one of the spec. sol. trigger lines.  I can't comment about the slings, as I did not have work on them.  This was on a call back in Nov., so things are a tad hazy, but I do remember the shorted zener.  Not certain until more data is collected, but it seems like there may be some inconsistencies here.  One game did this, while the other did this.  That wouldn't be a first for WMS though. - Jim
  
== MPU-200 section ==
 
Thanks.  I just started in on it too.  I'm done after this edit.
 
  
 +
From Force: Barakandl identified several inconsistencies and mistakes in the existing chart. I simply posted the new chart for him since he was unfamiliar with wiki table syntax
  
From Hibler: The "new" table should be ordered in the way that people will use it. That is, U8, pin 1, 2, 3, etc...U13 pin 1, 2, 3, etc.
+
== system 80 transformer grounds ==
Ordering it by signal name isn't as useful when buzzing connections.
 
  
 +
I had two Gottlieb The Games at one point, and both used quick disconnect connections on the transformer panel, rather than direct solder connections.
  
I was just typing this "PS I would make the pin column for both U8 and U13 along with the data / address lines sortable. It will much better in the long run, especially if someone has to check continuity on a board."
+
Example: http://www.ipdb.org/showpic.pl?id=3391&picno=28681
  
 +
--[[User:ForceFlow|ForceFlow]] ([[User talk:ForceFlow|talk]]) 12:45, 26 September 2016 (CDT)
  
From Force: If you add "sortable" to the wiki table like here: <b>class="wikitable sortable"</b>, the columns will have arrows to make them sortable. I just didn't want to add it right this second in case someone was currently editing it.
 
  
From Jimpal:  I'm done with editing it.  Have at it! :)
 
  
From  Hibler: I'm out too. Godspeed man!
+
----
 +
Quick disconnect as in the female spade connectors in the pic you referenced, or quick disconnect as in an inline Molex plug (9-12 pin roughly) in addition to the female spade connectors in the pic?--[[User:Jimpal|Jimpal]] ([[User talk:Jimpal|talk]]) 06:21, 27 September 2016 (CDT)
  
 +
---
 +
I was referring to the spade connectors, but there were also inline molex plugs. --[[User:ForceFlow|ForceFlow]] ([[User talk:ForceFlow|talk]]) 11:31, 27 September 2016 (CDT)
  
From Force: Ok, edits made to make the columns sort-friendly. I'm done for now until barakandl revisits this (hopefully tonight)
+
----
 +
Thanks for the info.  This made me research other games from that era.  --[[User:Jimpal|Jimpal]] ([[User talk:Jimpal|talk]]) 06:41, 28 September 2016 (CDT)

Latest revision as of 06:24, 22 March 2023

dr. Dude was one of the last 11C. Wonder why they still used switches on this one. When I open my Rollergames next time I will check if it's the same with this one.


I can't recall seeing double switches on the pops, but I know that I had to change out a zener on one of the spec. sol. trigger lines. I can't comment about the slings, as I did not have work on them. This was on a call back in Nov., so things are a tad hazy, but I do remember the shorted zener. Not certain until more data is collected, but it seems like there may be some inconsistencies here. One game did this, while the other did this. That wouldn't be a first for WMS though. - Jim


From Force: Barakandl identified several inconsistencies and mistakes in the existing chart. I simply posted the new chart for him since he was unfamiliar with wiki table syntax

system 80 transformer grounds

I had two Gottlieb The Games at one point, and both used quick disconnect connections on the transformer panel, rather than direct solder connections.

Example: http://www.ipdb.org/showpic.pl?id=3391&picno=28681

--ForceFlow (talk) 12:45, 26 September 2016 (CDT)



Quick disconnect as in the female spade connectors in the pic you referenced, or quick disconnect as in an inline Molex plug (9-12 pin roughly) in addition to the female spade connectors in the pic?--Jimpal (talk) 06:21, 27 September 2016 (CDT)

--- I was referring to the spade connectors, but there were also inline molex plugs. --ForceFlow (talk) 11:31, 27 September 2016 (CDT)


Thanks for the info. This made me research other games from that era. --Jimpal (talk) 06:41, 28 September 2016 (CDT)