Difference between revisions of "Eddy Sensor Boards"

From PinWiki
Jump to navigation Jump to search
 
Line 48: Line 48:
 
Eddys are reliable, but suffer from various long-term issues.
 
Eddys are reliable, but suffer from various long-term issues.
  
[[Twilight Zone Eddy Boards] (uses first generation sensor board with opto coupler)]
+
[[Twilight Zone Eddy Boards](uses first generation sensor board with opto coupler)
  
[[Star Trek: The Next Generation Eddy Boards] (uses first generation sensor board with opto coupler)]
+
[[Star Trek: The Next Generation Eddy Boards]] (uses first generation sensor board with opto coupler)
  
[[Roadshow Eddy Boards] (uses second generation sensor board with transistors)]
+
[[Roadshow Eddy Boards]] (uses second generation sensor board with transistors)
  
[[Theater of Magic Eddy Boards] (uses second generation sensor board with transistors)]
+
[[Theater of Magic Eddy Boards]] (uses second generation sensor board with transistors)
  
[[Scared Stiff Eddy Board] (uses second generation sensor board with transistors)]
+
[[Scared Stiff Eddy Board]] (uses second generation sensor board with transistors)
  
[[Cirqus Voltaire Eddy Boards] (uses third generation sensor board with auto adjust)]
+
[[Cirqus Voltaire Eddy Boards]] (uses third generation sensor board with auto adjust)
  
[[Monster Bash Eddy Boards] (uses third generation sensor board with auto adjust)]
+
[[Monster Bash Eddy Boards]] (uses third generation sensor board with auto adjust)

Latest revision as of 02:10, 22 May 2016

In 1993, Williams introduced eddy sensors with Twilight Zone. Eddy sensors can detect the ball through the playfield, and are useful where an opto is awkward. Twilight Zone used eddy sensors to identify the ceramic powerball.

The eddy sensor depends on an IC specifically designed for the purpose, the TDA0161. This chip makes a coil oscillate, and can detect the losses in the coil. When a a ball comes near, the losses increase and the circuit stops oscillating. This design is more stable than designs that use frequency shift like a beachcomber's metal detector.

Eddy sensors can detect fast-moving balls. This is important for the Scared Stiff crate; the Theater of Magic trunk; the Cirqus Voltaire ringmaster; and the heads on Roadshow.

Tales of the Arabian Nights did not use eddys for its exit lanes. Instead, it placed an opto pair looking through the playfield. Safecracker and Cactus Canyon used special reed switches to detect the ball.

Earlier eddy boards used optocouplers as outputs. By Roadshow, Williams switched to a discrete circuit which increased the complexity of the board but presumably reduced the cost. Note that the Roadshow manual has an incorrect schematic for the Eddy sensor board. Q2 is marked as 2N3904 when it should be a 2N3906 and diode D2 & D3 are the wroung way around. Use the schematic from Scared Stiff or Theater of Magic insted.

The eddy sensor is a reliable part. However, they require an accurate set point that varies between boards, because of variations in the components.


Small Eddy Sensor

Small Eddy Sensor

Used in:

  • Road Show, head jaw hit sensors (2)
  • Theater of Magic, trunk hit sensor
  • Scared Stiff, crate hit sensor


Twilight Zone Trough Eddy Sensor

Twilight Zone Trough Eddy Sensor











What Goes Wrong?

Eddys are reliable, but suffer from various long-term issues.

Twilight Zone Eddy Boards (uses first generation sensor board with opto coupler)

Star Trek: The Next Generation Eddy Boards (uses first generation sensor board with opto coupler)

Roadshow Eddy Boards (uses second generation sensor board with transistors)

Theater of Magic Eddy Boards (uses second generation sensor board with transistors)

Scared Stiff Eddy Board (uses second generation sensor board with transistors)

Cirqus Voltaire Eddy Boards (uses third generation sensor board with auto adjust)

Monster Bash Eddy Boards (uses third generation sensor board with auto adjust)