Difference between revisions of "Stern SPIKE™ System Repair"

From PinWiki
Jump to navigation Jump to search
(→‎SPIKE 2: added elvira)
 
(103 intermediate revisions by 7 users not shown)
Line 54: Line 54:
 
! Other Models
 
! Other Models
 
|-
 
|-
−
| 2016 || [[Batman 66]] || || Yes || Yes (240 max) || Super LE (80 max)
+
| 2016 || [[Batman 66]] || No || Yes || Yes (240 max) || Super LE (80 max)
 
|-
 
|-
 
| 2017 || [[Aerosmith]] || Yes || Yes || Yes (500 max) ||
 
| 2017 || [[Aerosmith]] || Yes || Yes || Yes (500 max) ||
Line 76: Line 76:
 
| 2019 || [[Star Wars Pin]] || colspan="4" | One Model
 
| 2019 || [[Star Wars Pin]] || colspan="4" | One Model
 
|-
 
|-
−
| 2019 || [[Elvira's House of Horrors]] || || Yes || Yes (400 max) || Signature Edition (50 max), 40th Anniversary Edition (199 max) released 10/2021
+
| 2019 || [[Elvira's House of Horrors]] || No || Yes || Yes (400 max) || Signature Edition (50 max), 40th Anniversary Edition (199 max) released 10/2021
 
|-
 
|-
 
| 2019 || [[Stranger Things]] || Yes || Yes || Yes (500 max) ||
 
| 2019 || [[Stranger Things]] || Yes || Yes || Yes (500 max) ||
Line 93: Line 93:
 
|-
 
|-
 
| 2021 || [[Jurassic Park Pin]] || colspan="4" | One Model
 
| 2021 || [[Jurassic Park Pin]] || colspan="4" | One Model
 +
|-
 +
| 2022 || [[Rush]] || Yes || Yes || Yes (1000 max) ||
 +
|-
 +
| 2022 || [[James Bond 007]] || Yes || Yes || Yes (1000 max) || 60th Anniversary LE (500 max)
 +
|-
 +
| 2023 || [[Foo Fighters]] || Yes || Yes || Yes (1000 max) ||
 +
|-
 +
| 2023 || [[Venom]] || Yes || Yes || Yes (1000 max) ||
 +
|-
 +
| 2023 || [[Jaws]] || Yes || Yes || Yes (1000 max) ||
 +
|-
 +
| 2024 || [[John Wick]] || Yes || Yes || Yes (1000 max) ||
 
|}
 
|}
  
−
==Technical Info==
+
==Recommended Documentation==
−
===The SPIKE Board Set===
 
  
−
Stern has issued a technical video discussing the Spike 1 system boards: https://www.youtube.com/watch?v=MvefdrNaAPg<br>
+
===Manuals===
−
There is a well done video by Stern, featuring George Gomez, describing the Spike 2 system boards:<br> https://www.youtube.com/watch?v=d1xdmgeAylQ&t=190s
+
As always, it is highly recommended to possess a game manual.  Every game manual is full of detailed information regarding game specific switch, lamp, and coil assignments.  Equally, details for maneuvering through test, audit, and bookkeeping screen menus, schematics for all boards used, and game specific mechanical assemblies are included.
−
[[File:Ghostbusters_Spike1_board.JPG|200pix|thumb|left|Ghostbusters Spike 1 board]]<br>
 
−
Spike 1 CPU board installed in a Ghostbusters.
 
−
 
 
−
<br clear=all>
 
−
 
 
−
===Recommended Documentation===
 
  
−
====Manuals====
+
The most current versions of the game manuals are posted on [https://sternpinball.com/support/game-manuals/ Stern's website in the support section].
−
As always, it is highly recommended to possess a game manual.  Every game manual is full of detailed information regarding game specific switch, lamp, and coil assignments. Equally, details for maneuvering through test, audit, and bookkeeping screen menus, schematics for all boards used, and game specific mechanical assemblies are included.
 
  
 
* Wrestlemania manuals - [https://sternpinball.com/wp-content/uploads/2018/11/WWE-PRO-MAN-1.pdf Pro], [https://sternpinball.com/wp-content/uploads/2018/11/WWE-LE-Manual.pdf LE]
 
* Wrestlemania manuals - [https://sternpinball.com/wp-content/uploads/2018/11/WWE-PRO-MAN-1.pdf Pro], [https://sternpinball.com/wp-content/uploads/2018/11/WWE-LE-Manual.pdf LE]
Line 120: Line 124:
 
* Ghostbusters manuals - [https://sternpinball.com/wp-content/uploads/2018/10/Ghostbusters_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2018/10/Ghostbusters_LE_web.pdf Premium & LE]
 
* Ghostbusters manuals - [https://sternpinball.com/wp-content/uploads/2018/10/Ghostbusters_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2018/10/Ghostbusters_LE_web.pdf Premium & LE]
  
−
* Batman '66 manuals - [https://sternpinball.com/wp-content/uploads/2018/10/Batman_LE_Pre_web.pdf Premium], [https://sternpinball.com/wp-content/uploads/2018/10/Batman_LE_Pre_web.pdf LE], [https://sternpinball.com/wp-content/uploads/2018/10/Batman_SLE_web.pdf Super LE]
+
* Batman '66 manuals - [https://sternpinball.com/wp-content/uploads/2023/01/Batman_LE_Pre_web.pdf Premium & LE], [https://sternpinball.com/wp-content/uploads/2023/01/Batman_SLE_web.pdf Super LE]
  
 
* Aerosmith manuals - [https://sternpinball.com/wp-content/uploads/2018/10/Aerosmith_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2018/10/Aerosmith_LE_Pre_web.pdf Premium & LE]
 
* Aerosmith manuals - [https://sternpinball.com/wp-content/uploads/2018/10/Aerosmith_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2018/10/Aerosmith_LE_Pre_web.pdf Premium & LE]
  
−
* Star Wars manuals - [https://sternpinball.com/wp-content/uploads/2018/10/StarWars_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2018/10/StarWars_LE_Pre_web.pdf Premium & LE]
+
* Star Wars manuals - [https://sternpinball.com/wp-content/uploads/2018/10/StarWars_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2018/10/StarWars_LE_Pre_web.pdf Premium & LE], [https://sternpinball.com/wp-content/uploads/2020/01/StarWarsComic_Pro_web.pdf Comic Pro], [https://sternpinball.com/wp-content/uploads/2020/01/StarWarsComic_LE_Pre_web.pdf Comic Premium & LE]
  
 
* Guardians of the Galaxy manuals - [https://sternpinball.com/wp-content/uploads/2018/09/Guardians_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2018/09/Guardians_LE_Pre_web.pdf Premium], [https://sternpinball.com/wp-content/uploads/2018/09/Guardians_LE_Pre_web-1.pdf LE]
 
* Guardians of the Galaxy manuals - [https://sternpinball.com/wp-content/uploads/2018/09/Guardians_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2018/09/Guardians_LE_Pre_web.pdf Premium], [https://sternpinball.com/wp-content/uploads/2018/09/Guardians_LE_Pre_web-1.pdf LE]
Line 134: Line 138:
 
* Beatles manuals - [https://sternpinball.com/wp-content/uploads/2019/02/Beatles_web.pdf Gold/Platinum/Diamond]
 
* Beatles manuals - [https://sternpinball.com/wp-content/uploads/2019/02/Beatles_web.pdf Gold/Platinum/Diamond]
  
−
* The Munsters manuals - [https://sternpinball.com/wp-content/uploads/2019/01/Munsters_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2019/03/Munsters_LE_Pre_web.pdf Premium & LE]
+
* The Munsters manuals - [https://sternpinball.com/wp-content/uploads/2020/02/Munsters_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2020/02/Munsters_LE_Pre_web.pdf Premium & LE]
  
−
* Black Knight: Sword of Rage manuals - [https://sternpinball.com/wp-content/uploads/2019/05/BlackKnight_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2019/05/BlackKnight_LE_Pre_web.pdf Premium & LE]
+
* Black Knight: Sword of Rage manuals - [https://sternpinball.com/wp-content/uploads/2019/05/BlackKnight_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2019/07/BlackKnight_LE_Pre_web.pdf Premium & LE]
  
−
* Jurassic Park manuals - [https://sternpinball.com/wp-content/uploads/2019/08/JurassicPark_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2019/12/JurassicPark_LE_Pre_web.pdf Premium & LE]
+
* Jurassic Park manuals - [https://sternpinball.com/wp-content/uploads/2022/11/JurassicPark_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2022/11/JurassicPark_LE_Pre_web.pdf Premium & LE]
  
−
* Star Wars Pin - [https://sternpinball.com/wp-content/uploads/2019/12/StarWars_Pin_web.pdf Manual]
+
* Star Wars The Pin - [https://sternpinball.com/wp-content/uploads/2020/12/StarWars_Pin_web.pdf Manual]
  
 
* Elvira's House of Horrors - [https://sternpinball.com/wp-content/uploads/2019/10/Elvira_LE_Pre_web.pdf Premium, LE, & SE]
 
* Elvira's House of Horrors - [https://sternpinball.com/wp-content/uploads/2019/10/Elvira_LE_Pre_web.pdf Premium, LE, & SE]
Line 146: Line 150:
 
* Stranger Things manuals - [https://sternpinball.com/wp-content/uploads/2020/01/StrangerThings_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2020/01/StrangerThings_LE_Pre_web.pdf Premium & LE]
 
* Stranger Things manuals - [https://sternpinball.com/wp-content/uploads/2020/01/StrangerThings_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2020/01/StrangerThings_LE_Pre_web.pdf Premium & LE]
  
−
* Teenage Mutant Ninja Turtles manuals - [https://sternpinball.com/wp-content/uploads/2020/07/TMNT_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2020/06/TMNT_LE_Pre_web.pdf Premium & LE]
+
* Teenage Mutant Ninja Turtles manuals - [https://sternpinball.com/wp-content/uploads/2020/07/TMNT_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2022/11/TMNT_LE_Pre_web.pdf Premium & LE]
  
 
* The Avengers: Infinity Quest - [https://sternpinball.com/wp-content/uploads/2020/09/AvengersInfinity_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2020/09/AvengersInfinity_LE_Pre_web.pdf Premium & LE]
 
* The Avengers: Infinity Quest - [https://sternpinball.com/wp-content/uploads/2020/09/AvengersInfinity_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2020/09/AvengersInfinity_LE_Pre_web.pdf Premium & LE]
Line 152: Line 156:
 
* Led Zeppelin - [https://sternpinball.com/wp-content/uploads/2021/01/LedZeppelin_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2021/01/LedZeppelin_LE_Pre_web.pdf Premium & LE]
 
* Led Zeppelin - [https://sternpinball.com/wp-content/uploads/2021/01/LedZeppelin_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2021/01/LedZeppelin_LE_Pre_web.pdf Premium & LE]
  
−
* The Mandalorian - [https://sternpinball.com/wp-content/uploads/2021/06/Mandalorian_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2021/06/Mandalorian_LE_Pre_web.pdf Premium & LE]
+
* The Mandalorian - [https://sternpinball.com/wp-content/uploads/2022/05/Mandalorian_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2022/05/Mandalorian_LE_Pre_web.pdf Premium & LE]
  
−
* Godzilla - [https://sternpinball.com/wp-content/uploads/2021/09/Godzilla_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2021/10/Godzilla_LE_Pre_web.pdf Premium & LE]
+
* Godzilla - [https://sternpinball.com/wp-content/uploads/2022/05/Godzilla_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2022/05/Godzilla_LE_Pre_web.pdf Premium & LE]
  
−
====Schematics====
+
* Jurassic Park The Pin - [https://sternpinball.com/wp-content/uploads/2022/04/JurassicPark_Pin_web.pdf Manual]
  
−
=====SPIKE 1=====
+
* Rush - [https://sternpinball.com/wp-content/uploads/2022/05/Rush_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2022/08/Rush_LE_Pre_web.pdf Premium & LE]
 +
 
 +
* James Bond 007 [https://sternpinball.com/wp-content/uploads/2022/12/JamesBond007_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2022/12/JamesBond007_LE_Pre_web.pdf Premium & LE], [https://sternpinball.com/wp-content/uploads/2023/02/JamesBond007_60th_web.pdf 60TH LE]
 +
 
 +
* Foo Fighters - [https://sternpinball.com/wp-content/uploads/2023/06/FooFighters_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2023/06/FooFighters_LE_Pre_web.pdf Premium & LE]
 +
 
 +
* Venom - [https://sternpinball.com/wp-content/uploads/2023/11/Venom_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2024/01/Venom_LE_Pre_web.pdf Premium & LE]
 +
 
 +
* Jaws - [https://sternpinball.com/wp-content/uploads/2024/02/Jaws_Pro_web.pdf Pro], [https://sternpinball.com/wp-content/uploads/2024/02/Jaws_LE_Pre_web.pdf Premium & LE]
 +
 
 +
===Schematics===
 +
Some Stern Spike schematics can be found [https://sternpinball.com/support/ <b><u>here</u></b>].
 +
 
 +
====SPIKE 1====
  
 
{| class="wikitable"
 
{| class="wikitable"
 
! Game
 
! Game
−
! [https://sternpinball.com/wp-content/uploads/2019/02/520-6936-01B-CPU-SPIKE-1-.pdf 520-6936-01]<br>SPIKE-1 CPU<br>Node Board
+
! [https://sternpinball.com/wp-content/uploads/2019/02/520-6936-01B-CPU-SPIKE-1-.pdf 520-6936-01] or 520-6936-10<br>SPIKE-1 CPU<br>Node Board
 
! 520-5319-00<br>Cabinet<br>Node Board
 
! 520-5319-00<br>Cabinet<br>Node Board
 
! [https://sternpinball.com/wp-content/uploads/2019/02/520-6967-72D-CABINET-NODE-BOARD-72Mhz-expanded.pdf 520-6967-xx]<br>Cabinet<br>Node Board
 
! [https://sternpinball.com/wp-content/uploads/2019/02/520-6967-72D-CABINET-NODE-BOARD-72Mhz-expanded.pdf 520-6967-xx]<br>Cabinet<br>Node Board
 
! [https://sternpinball.com/wp-content/uploads/2019/02/520-6935-10E-8-COIL-PLFD-NODE-BOARD-4K.pdf 520-6935-10]<br>8-Coil Playfield<br>Node Board
 
! [https://sternpinball.com/wp-content/uploads/2019/02/520-6935-10E-8-COIL-PLFD-NODE-BOARD-4K.pdf 520-6935-10]<br>8-Coil Playfield<br>Node Board
 
! 520-6985-72<br>8-Coil Playfield<br>Node Board
 
! 520-6985-72<br>8-Coil Playfield<br>Node Board
−
! [https://sternpinball.com/wp-content/uploads/2019/02/520-5322-72H-32-SW-LMP-EXPANSION-BRD-72Mhz.pdf 520-5322-00]<br>32-Light & Switch<br>Node Board
+
! [https://sternpinball.com/wp-content/uploads/2019/02/520-5322-72H-32-SW-LMP-EXPANSION-BRD-72Mhz.pdf 520-5322-xx]<br>32-Light & Switch<br>Node Board
 
! 520-5329-10<br>4-Coil Playfield<br>Node Board
 
! 520-5329-10<br>4-Coil Playfield<br>Node Board
 
! 520-5345-01<br>Trough Serial Opto<br>Receiver Extension<br>Board
 
! 520-5345-01<br>Trough Serial Opto<br>Receiver Extension<br>Board
 +
! Topper
 
! Misc.
 
! Misc.
 
|-
 
|-
−
| Whoa Nellie || Node 0 || Node 1 || || Node 8 || || Node 10 || Node 9 & 11 || ||
+
| Whoa Nellie || Node 0 || Node 1 || || Node 8 || || Node 10 || Node 9 & 11 || || ||
 
|-
 
|-
−
| KISS Prem/LE || Node 0 || Node 1 || || Node 8, 9, & 10 || || Node 11 || || 8a ||
+
| KISS Prem/LE || Node 0 || Node 1 || || Node 8, 9, & 10 || || Node 11 || || 8a || ||
 
|-
 
|-
−
| Game of Thrones Prem/LE || Node 0 ||  || Node 1 || Node 8 & 11 || || || Node 9 & 10 || 8b ||
+
| Game of Thrones Prem/LE || Node 0 ||  || Node 1 || Node 8 & 11 || || || Node 9 & 10 || 8b || ||
 
|-
 
|-
−
| Ghostbusters Prem/LE || Node 0 ||  || Node 1 || || Node 8 & 9 || || Node 10 || 8a || Node 24 - 520-6988-00 LCD Node (Ecto Goggles)
+
| Ghostbusters Prem/LE || Node 0 ||  || Node 1 || || Node 8 & 9 || || Node 10 || 8a || Node 12 (optional) || Node 24 - 520-6988-00 LCD Node (Ecto Goggles)
 
|}
 
|}
  
−
=====SPIKE 2=====
+
====SPIKE 2====
  
 
{| class="wikitable"
 
{| class="wikitable"
Line 188: Line 206:
 
! 509-1003-01<br>SPIKE-2 CPU<br>Node Board
 
! 509-1003-01<br>SPIKE-2 CPU<br>Node Board
 
! [https://sternpinball.com/wp-content/uploads/2019/02/520-6967-72D-CABINET-NODE-BOARD-72Mhz-expanded.pdf 520-6967-xx]<br>Cabinet<br>Node Board
 
! [https://sternpinball.com/wp-content/uploads/2019/02/520-6967-72D-CABINET-NODE-BOARD-72Mhz-expanded.pdf 520-6967-xx]<br>Cabinet<br>Node Board
−
! [https://sternpinball.com/wp-content/uploads/2019/02/520-7017-72D-Core-Node-Hall-3amp.pdf 520-7017-72]<br>8-Coil Playfield<br>Node Board
+
! [https://sternpinball.com/wp-content/uploads/2019/02/520-7017-72D-Core-Node-Hall-3amp.pdf 520-7017-72] or 520-1057-00<br>8-Coil Playfield<br>Node Board
 
! [https://sternpinball.com/wp-content/uploads/2019/02/520-6998-72C-4-COIL-PLFD-NODE-BOARD-Plus.pdf 520-6998-72]<br>4-Coil Playfield<br>Node Board
 
! [https://sternpinball.com/wp-content/uploads/2019/02/520-6998-72C-4-COIL-PLFD-NODE-BOARD-Plus.pdf 520-6998-72]<br>4-Coil Playfield<br>Node Board
 
! [https://sternpinball.com/wp-content/uploads/2019/02/520-6976-72A-SPI-only-NODE-board.pdf 520-6976-72]<br>SPI Core Playfield<br>Node Board
 
! [https://sternpinball.com/wp-content/uploads/2019/02/520-6976-72A-SPI-only-NODE-board.pdf 520-6976-72]<br>SPI Core Playfield<br>Node Board
−
! [https://sternpinball.com/wp-content/uploads/2019/02/520-7001-00A-TROUGH-RECEIVER-BOARD.pdf 520-7001-00]<br>Trough Serial Opto<br>Receiver Extension<br>Board
+
! [https://sternpinball.com/wp-content/uploads/2019/02/520-7001-00A-TROUGH-RECEIVER-BOARD.pdf 520-7001-00], 520-7001-00, 520-1051-00, or 520-8516-00<br>Trough Serial Opto<br>Receiver Extension<br>Board
 
! [https://sternpinball.com/wp-content/uploads/2019/02/520-6996-00A-Serial-Motor-Controller-4-way-functionality.pdf 520-6996-00A]<br>Motor Driver Board
 
! [https://sternpinball.com/wp-content/uploads/2019/02/520-6996-00A-Serial-Motor-Controller-4-way-functionality.pdf 520-6996-00A]<br>Motor Driver Board
 
! Topper
 
! Topper
Line 339: Line 357:
 
|
 
|
 
|  
 
|  
−
 
 
|
 
|
 
|-
 
|-
−
| Jurassic Park
+
| Jurassic Park (Pro)
 
|  
 
|  
 
| Node 0
 
| Node 0
Line 352: Line 369:
 
|
 
|
 
|
 
|
−
| Ndoe 9b - 520-6996-00 - (Back panel) Serial Motor Driver board (Prem/LE only)<br> Node (unlabeled) - 520-8424-00 - (Back panel) Stepper Motor Driver board (Prem/LE only)
+
|
 
|-
 
|-
−
| Star Wars Pin
+
| Jurassic Park (Prem/LE)
 +
|
 +
| Node 0
 +
| Node 1
 +
| Node 8 & 9
 +
|
 +
|
 +
| 8a
 +
| 9b
 +
|
 +
| Node (unlabeled) - 520-8424-00 - (Back panel) Stepper Motor Driver board
 +
|-
 +
| Star Wars The Pin
 
|  
 
|  
 
| Node 0
 
| Node 0
Line 375: Line 404:
 
| 8a
 
| 8a
 
|
 
|
−
|
+
| Node 12 (optional)<br>[https://sternpinball.com/wp-content/uploads/2019/02/520-6998-72C-4-COIL-PLFD-NODE-BOARD-Plus.pdf 520-6998-72]
 
|
 
|
 
|-
 
|-
Line 386: Line 415:
 
|  
 
|  
 
| 8a
 
| 8a
 +
|
 +
|Node 12 (optional)
 +
|Node 9a1 - 520-8418-00 - Dual Motor Driver Lamp board
 +
|-
 +
| Heavy Metal
 +
|
 +
| Node 0
 +
|
 +
| Node 8
 +
|
 +
|
 +
| 8c
 +
|
 
|
 
|
 
|
 
|
−
|Node 9a1 - 520-8418-00 - Dual Motor Driver Lamp board
 
 
|-
 
|-
 
| Teenage Mutant Ninja Turtles
 
| Teenage Mutant Ninja Turtles
Line 449: Line 490:
 
| Node 12 (optional)<br>520-8511-00
 
| Node 12 (optional)<br>520-8511-00
 
| Node 4 - 509-2020-00 - QR Reader Node<br>Node 10 - 520-5781-02 - Stepper Motor (Prem/LE only)
 
| Node 4 - 509-2020-00 - QR Reader Node<br>Node 10 - 520-5781-02 - Stepper Motor (Prem/LE only)
 +
|-
 +
| Jurassic Park The Pin
 +
|
 +
| Node 0
 +
|
 +
| Node 8
 +
|
 +
|
 +
| 8b
 +
|
 +
|
 +
|
 +
|-
 +
| Rush
 +
|
 +
| Node 0
 +
| Node 1
 +
| Node 8 & 9
 +
|
 +
|
 +
| 8a
 +
|
 +
| Node 12 (optional)<br>520-6998-72
 +
| Node 4 - 509-2020-00 - QR Reader Node<br>Node 2 (Optional) - 520-8511-00 - Expression Lighting<br>Node 9a4 - 520-8543-00 - Time Machine PCB (Prem/LE only)<br>Node 10 - 520-5781-02 - Stepper Motor (Prem/LE only)
 +
|-
 +
| James Bond (Pro/Premium/LE)
 +
|
 +
| Node 0
 +
| Node 1
 +
| Node 8 & 9
 +
|
 +
|
 +
| 8a
 +
|
 +
| Node 12 (optional)<br>520-8087-72
 +
| Node 4 - 509-2020-00 - QR Reader Node<br>Node 9b - 520-6996-00 - PCB Serial Dual Motor Driver (Prem/LE only)
 +
|-
 +
| James Bond (60th Anniversary LE)
 +
|
 +
| Node 0
 +
| Node 1
 +
| Node 8 & 9
 +
|
 +
| Node 7
 +
| 8a
 +
|
 +
| Node 12 (optional)<br>520-8087-72
 +
| Node 4 - 509-2020-00 - QR Reader Node<br> Node 6 - 520-5379-14 - Stepper Motor Node Board
 +
|-
 +
| Foo Fighters
 +
|
 +
| Node 0
 +
| Node 1
 +
| Node 8 & 9
 +
|
 +
|
 +
| 8a
 +
|
 +
| Node 12 (optional)<br>520-5370-72
 +
| Node 4 - 509-2020-00 - QR Reader Node<br>Node 2 (Optional) - 520-5370-72 - Expression Lighting (Prem/LE only)
 
|}
 
|}
  
Line 454: Line 555:
 
# 509-1000-00 replaced by 509-1003-01
 
# 509-1000-00 replaced by 509-1003-01
 
# For the Star Wars Pin (Home Edition), Node 8 subsumes the functions performed by the cabinet node board (typically Node 1 on other Spike machines).
 
# For the Star Wars Pin (Home Edition), Node 8 subsumes the functions performed by the cabinet node board (typically Node 1 on other Spike machines).
 +
# As per a [[media:Stern-NodeBoardUpdate.pdf|service released in September 2022]], node board 520-7017-72 (blue board) is being replaced by 520-1057-00 (green board). The boards were stated to be interchangeable.
 +
 +
<br clear=all>
 +
 +
===Service Bulletins===
 +
Service bulletins detailed any problems or issues with games that were discovered after they were released. Stern publishes these on their [https://sternpinball.com/support/service-bulletins/ service bulletins page].
 +
 +
{| class="wikitable sortable"
 +
|-
 +
!Service Bulletin
 +
!Date
 +
!Game(s)
 +
!Summary
 +
!Notes
 +
 +
|-
 +
|[[media:Stern-NodeBoardUpdate.pdf|(unnumbered)]]
 +
|2022-09-30
 +
|General
 +
|Parts advisory: Node board update
 +
|Node board 520-7017-72 (blue board) is being replaced by 520-1057-00 (green board). The boards were stated to be interchangeable.
 +
|-
 +
|[[media:Stern-RushSwitchAdvisory.pdf|(unnumbered)]]
 +
|2022-06-07
 +
|Rush
 +
|Service advisory: Rush scoop switch
 +
|
 +
|-
 +
|[[media:Stern-RushScoopAdvisory.pdf|(unnumbered)]]
 +
|2022-06-07
 +
|Rush
 +
|Service advisory: Rush scoop protector
 +
|
 +
|-
 +
|[[media:Stern-SpinningDiscAdjustment.pdf|(unnumbered)]]
 +
|2022-05-26
 +
|Avengers Infinity Quest
 +
|Service advisory: Avengers spinning disc adjustment
 +
|
 +
|-
 +
|[[media:Stern-Setup-Mode-Advisory.pdf|(unnumbered)]]
 +
|2020-01-03
 +
|SPIKE 2 games
 +
|Service advisory: Guided setup mode
 +
|
 +
|-
 +
|[[media:Stern-ShakerMotorAdvisory.pdf|(unnumbered)]]
 +
|2018-05-01
 +
|General
 +
|Service advisory: Shaker motors
 +
|
 +
|-
 +
|[[media:sb191.pdf|191]]
 +
|2017-12-29
 +
|Guardians of the Galaxy
 +
|Metal bracket protector
 +
|For GOTG Pro games prior to serial number 275330
 +
|-
 +
|[[media:Sb190revB.pdf|190]]
 +
|2017-11-16
 +
|Ghostbusters, Batman, Aerosmith, Star Wars
 +
|Core node capacitor service
 +
|
 +
|-
 +
|[[media:sb189.pdf|189]]
 +
|2017-11-16
 +
|Ghostbusters, Batman, Aerosmith, Star Wars
 +
|Core node stabilization
 +
|
 +
|-
 +
|[[media:sb188.pdf|188]]
 +
|2016-12-30
 +
|Ghostbusters
 +
|Ghostbusters flasher #129
 +
|
 +
|-
 +
|[[media:sb187.pdf|187]]
 +
|2016-11-21
 +
|Ghostbusters
 +
|Ecto goggles shield kit
 +
|
 +
|-
 +
|[[media:sb186.pdf|186]]
 +
|2015-08-27
 +
|KISS, Metallica, X-Men
 +
|Scoop switch adjustment
 +
|
 +
|-
 +
|[[media:sb185.pdf|185]]
 +
|2015-07-20
 +
|Whoa Nelly, Kiss, WWE
 +
|SPIKE system updates
 +
|
 +
|-
 +
|[[media:sb184.pdf|184]]
 +
|2015-06-12
 +
|General
 +
|Third party shaker motors
 +
|
 +
 +
 +
 +
 +
|}
 +
 +
==Technical Info==
 +
===The SPIKE Board Set===
 +
 +
Stern has issued a technical video discussing the Spike 1 system boards: https://www.youtube.com/watch?v=MvefdrNaAPg<br>
 +
There is a well done video by Stern, featuring George Gomez, describing the Spike 2 system boards:<br> https://www.youtube.com/watch?v=d1xdmgeAylQ&t=190s
 +
[[File:Ghostbusters_Spike1_board.JPG|200pix|thumb|left|Ghostbusters Spike 1 board]]<br>
 +
Spike 1 CPU board installed in a Ghostbusters.
  
 
<br clear=all>
 
<br clear=all>
Line 465: Line 678:
 
Spike system games use four pushbutton switches (located on the coin door) to access the bookkeeping, adjustments, and diagnostics very much like Williams WPC series machines do. The black pushbutton enters the menu while the two red + and - pushbuttons step you through the menu (also act as volume up and volume down). If you want to go backwards, push the green button (it acts like "escape" function).
 
Spike system games use four pushbutton switches (located on the coin door) to access the bookkeeping, adjustments, and diagnostics very much like Williams WPC series machines do. The black pushbutton enters the menu while the two red + and - pushbuttons step you through the menu (also act as volume up and volume down). If you want to go backwards, push the green button (it acts like "escape" function).
  
−
===Cabinet Node Board Information===
+
===Node Board Information===
 +
 
 +
Node board library.
 +
 
 +
====SPIKE 1 CPU - 520-5318-01====
 +
[[file:SPIKE0MPU.jpeg|left|thumb|300px|Node Board 0, part number 520-5318-01.]]<br clear=all>
 +
Node 0 in the backbox. Used in the home version "The Pin" games: Avengers/Transformers The Pin
 +
 
 +
====SPIKE 1 CPU - 520-6936-xx====
 +
Node 0 in the backbox.
 +
 
 +
Part numbers:
 +
* 520-6936-00
 +
* 520-6936-00A
 +
* 520-6936-01
 +
* 520-6936-10 (Video Out Support; Backward compatible with -00)
 +
* 520-6936-10B
 +
* 520-6936-11
 +
 
 +
====SPIKE 2 CPU - 509-1000-01 & 509-1003-01====
 +
Node 0 in the backbox.
 +
 
 +
* 509-1000-01 was only used on the first two SPIKE 2 games (Batman 66 and Aerosmith).
 +
* 509-1003-01 was used in all subsequent SPIKE 2 games to date.
 +
 
 +
This CPU came in two variations: a 50Hz version for European games, and a 60Hz version for USA games. The European electrical grid runs on 50Hz power, while the USA runs on 60Hz.
 +
 
 +
If bringing a game from one electrical region to another, two known methods to convert a game are to replace the CPU, or use an external voltage transformer with a frequency converter.
 +
 
 +
[[file:Stern-Spike2-Node0.jpeg|none|thumb|300px|Node Board 0, part number 509-1003-01.]]<br>
 +
Node 0 in the backbox. Used in the home version "The Pin" games: Avengers/Transformers The Pin
 +
 
 +
====Node Board - 520-7019-72A====
 +
 
 +
 
 +
[[file:520-7019-72AFront.jpg|left|thumb|300px|Stern Node board from BM66 with Q5 blown and removed.]]
 +
[[file:520-7019-72ABack.jpg|right|thumb|300px|]]<br>
 +
This node board was used on at least BM66.<br clear=all>
 +
 
 +
====Node 10 Board - 520-5781-02====
 +
 
 +
The part that is most often damaged on this board is U1, a [https://www.mouser.com/ProductDetail/Trinamic/TMC5041-LA?qs=TiOZkKH1s2QUPp262HSTPw%3D%3D TMC5041-LA].
 +
 
 +
[[file:Node10.jpg|left|thumb|300px|Stern Node 10 board.]]
 +
[[file:BlownSternNode10Board.jpg|right|thumb|300px|A blown Node 10 board with the typically blown TMC5041 shown.]]<br clear=all>
 +
 
 +
====520-5331-00D Grinder Board====
 +
[[file:SPIKE520-5331-00DGrinder.jpg|left|thumb|300px|The "Grinder" board.]]
 +
The "Grinder" board was used in at least AC/DC and Metallica (both S.A.M. games) to drive general illumination LEDs. Schematics for the board can be found in the Metallica manual (best) and the AC/DC manual.
 +
 
 +
It appears to be an "open loop" driver, with one way communication from the MPU/Driver to the Grinder board via the ethernet connector. The onboard microcontroller must be flashed with Stern proprietary code, making owner repair of this board problematic.
 +
 
 +
Although the schematics indicate use of an A8498 voltage regulator, that part does not appear on the actual board, nor do solder pads to accommodate the part.
 +
 
 +
{| class="wikitable"
 +
!Part
 +
!Function
 +
!Locations (size)
 +
!Availability
 +
|-
 +
|ATTiny4313-SU||microcontroller||U3 (SOIC-20)||not available as of 3/5/23
 +
|-
 +
|STP16CPC26TTR||LED driver||U2, U5, U6 (TSSOP24)||not available as of 3/5/23
 +
|-
 +
|A8498SLJTR-T||Voltage regulator||U7, not stuffed||not available as of 3/5/23
 +
|-
 +
|ZXMN7A11KTC||70V N-Channel 6.1A MOSFET||Q1-Q4||available as of 3/5/23
 +
|-
 +
|MAX232DR 11KTC||RS232 interface||U4 (SOIC-Narrow-16)||available as of 3/5/23
 +
|-
 +
|}
 +
<br clear=all>
 +
 
 +
====Cabinet Node Board - 520-6967-72B====
 +
 
 +
[[file:SternSpike199-6967-00B.jpg|left|thumb|300px|Cabinet Node Board 520-6967-72B. Note that U14 (an MP24943 buck converter) on this board has been damaged.]]<br clear=all>
  
 
LED indicators on the board:
 
LED indicators on the board:
Line 490: Line 778:
 
*CN15: Optional spare LED +5 volt power source
 
*CN15: Optional spare LED +5 volt power source
 
*CN16: To shaker motor
 
*CN16: To shaker motor
 +
 +
====LED driver board - 520-8533-00A====
 +
[[file:520-8533-00AComponentSide.jpg|left|thumb|300px|Cabinet Node Board 520-8533-00A. This board appears to drive LED lamps.]]
 +
[[file:520-8533-00A.jpg|right|thumb|300px|Cabinet Node Board 520-8533-00A. This board appears to drive LED lamps.]]
 +
<br clear=all>
 +
 +
====32-Light & Switch Board - 520-5322-xx====
 +
There are two known board revisions: Revision E and revision H (notated on the board as 520-5322-00E or 520-5322-00H)
 +
 +
This board currently has 5 known designations based on the game code installed on it. Otherwise, the physical hardware appears to be the same. Note that installing a board in the wrong game will (at minimum) prevent it from working.
 +
 +
* 520-5322-00: Some documentation indicates when this was offered online purchase, it was in an unconfigured board with no code (thus did not work in certain games, such as Star Trek). Game manuals indicate this board originally came with WWE Wrestlemania Pro (SPIKE game), Star Trek Pro/Premium/LE (SAM games), KISS Pro/Premium/LE (SPIKE game)
 +
* 520-5322-10: The Walking Dead Pro/Premium/LE (Note: SAM games)
 +
* 520-5322-20: Star Trek Pro/Premium/LE (Note: SAM games)
 +
* 520-5322-30: WWE Wrestlemania Pro, KISS Pro (and likely Premium/LE), Pabst Can Crusher, Primus (SPIKE games)
 +
* 520-5322-72: Whoa Nelly, Pabst Can Crusher, Primus (SPIKE games)
 +
 +
====Spike 2 Dual Motor Control Board - 520-8414-00====
 +
[[file:SternSpikeMotorControlBoard.jpg|right|thumb|300px|Spike 2 Dual Motor Drive Board, 520-8414-00. Note that this board has a blown L6206Q driver chip.]]<br>
 +
This board appears on at least the following games:
 +
*Elvira's House of Horrors
 +
*Mandalorian
 +
*Stranger Things (drives the ramp)
 +
*Teenage Mutant Ninja Turtles
 +
<br clear=all>
 +
 +
====Spike 2 Dual Motor Control Board - 520-5781-02====
 +
[[file:Placeholder.jpg|left|thumb|300px|Spike 2 Dual Motor Drive Board, 520-5781-02.]]<br>
 +
This board appears on at least the following games:
 +
*Godzilla Premium and LE
 +
*Rush Premium and LE
 +
<br clear=all>
 +
 +
 +
====Trough Serial Opto Receiver Extension Board====
 +
 +
Part numbers:
 +
* 520-8516-00 (current version)
 +
* 520-1051-00
 +
* 520-7001-00
 +
* 520-5345-00 (initial version)
  
 
===Dollar Bill Acceptors===
 
===Dollar Bill Acceptors===
Line 569: Line 898:
 
[[File:Ghostbusters_interconnect.JPG|200px|thumb|left|Ghostbusters interconnection wiring label]]<br><br>
 
[[File:Ghostbusters_interconnect.JPG|200px|thumb|left|Ghostbusters interconnection wiring label]]<br><br>
  
 +
<br clear=all>
 +
 +
====Excessive "clicking" in some 2023 games====
 +
[[File:SternCaps.jpg|left|thumb|300px|The real culprits causing excessive clicking are the capacitors numbered in this Power Distribution Board diagram. <i>Image taken from PinSide post by "PinMonk"</i>]]
 +
[[File:SternSpikePS.jpg|right|thumb|400px|The real culprits causing excessive clicking are the capacitors numbered in this Power Distribution Board diagram. <i>Image taken from PinSide post by "PinMonk"</i>]]
 +
SternSpikePS.jpg<br>
 +
An excellent analysis and repair recommendation was posted by PinSider "PinMonk" regarding excessive "clicking" in some modern Stern games.
 +
 +
[[image:PinSideLogo.png]] The post can be found [https://pinside.com/pinball/forum/topic/stern-clicking-power-supply-fix <b><u>here</b></u>].
 
<br clear=all>
 
<br clear=all>
  
Line 589: Line 927:
 
===Game resets===
 
===Game resets===
  
−
Some reset/slam tilt problems have been traced to the shaker motor. Please check the service advisory bulletin.
+
Some reset/slam tilt problems have been traced to the shaker motor. Please check the [[media:Stern-Setup-Mode-Advisory.pdf|shaker motor service advisory]]
  
−
[https://sternpinball.com/wp-content/uploads/2018/08/Stern-ShakerMotorAdvisory.pdf Shaker motor service advisory]
+
Game software bugs are often the source of random crashes. This manifests itself as the screen freezing while the flippers still work for a while. The OS will eventually restart the game program and it returns to the attraction mode. This is very common in early software revisions for new titles.
 +
 
 +
A failing memory card can also cause game resets. This causes the game to crash when specific video is running or it may just go into a boot loop.
 +
 
 +
===Stern Insider Connected Displays Invalid Factory Config Message===
 +
As of September 2022, [https://pinside.com/pinball/forum/topic/buyer-beware-replacement-spike-2-cpu-board-breaks-insider-connected it was discovered] that installing a new replacement Spike 2 MPU into a game causes the Stern Insider Connected feature to stop working and display the message when accessing the Insider Connected setup screen: "This machine has an invalid Factory Config. Contact your distributor."
 +
 
 +
To fix the problem, contact Stern support. The MPU will need to be shipped to Stern, where they will use proprietary software to program the board. Once the MPU is returned and installed, Stern Insider Connected should start functioning again.
  
 
===Solenoid problems===
 
===Solenoid problems===
 
===Lamp problems===
 
===Lamp problems===
 +
 +
Spike system uses LED driver boards that are daisy chained together and receive their communication from the nearest node board over SPI bus. Each node board may have their own set of LED driver boards. The LED driver boards themselves often house several surface mounted LEDs to cover areas with higher concentration of feature lights. The LED boards also have direct outputs to either individual single LED boards or larger boards that house multiple LEDs. These smaller LED boards have no onboard logic. Note that LED driver boards are not the only type of devices controlled by the SPI bus, as there are for example motor control boards that are part of the LED driver board daisy chains.
 +
 +
[[File:Stern-Lamp-Control-Layout-Highlighted.jpeg|none|thumb|300px|Typical Spike light control layout. Node board (Green) controls two LED driver boards (cyan) that again have their own directly controlled LED boards (yellow)]]
 +
 +
 +
====Directly controlled LED boards====
 +
These boards house single or multiple LEDs and have no other logic on them. They are fed 5 volts by the LED driver board above them and as many grounds as there are LEDs on the board. RGB LEDs have individual grounds for each color. The simplest variant has typically the wires soldered directly onto it, larger ones have connectors. Typical failure modes include cracked soldering points and
 +
loose wires. Should the LEDs themselves fail, surface mount soldering skills are needed. All normal shaped boards are however readily available from Stern.
 +
 +
[[File:Stern-Lamp-Boards.jpeg|none|thumb|300px|Three single LED boards and one multi-LED board with RGB LEDs]]
 +
 +
 +
====LED driver board====
 +
These boards receive lamp control commands from a node board above them and translate that into individual LED control signals. The signals and 5 volt feed for the logic and LEDs comes through the connector marked as "SERIAL IN". The next board in the chain is connected to the "SERIAL OUT" connector. The rest of the connectors are individual LED drives. These boards also often have LEDs on them. Replacing components requires surface mount soldering skills, but the most commonly cracked soldering points tend to be the Molex connectors, that can be reflowed with a thin soldering iron tip. Since the LEDs on these boards need to be on specific places, these are game-specific and in some cases game variant (pro/premium/LE) specific.
 +
 +
One very common failure mode is bad connection for the serial in/out connector. This causes complete blackout, severe flickering or incorrectly lit lamps. Since the following board(s) receive their data over the same connector, the symptom is also observed in the following boards, including non-LED boards.
 +
 +
[[File:Stern-Lamp-Driver.jpeg|none|thumb|300px|LED driver board from The Mandalorian]]
 +
 
===Switch problems===
 
===Switch problems===
 +
 +
====Long Range Opto Problems====
 +
"Long Range Opto" - part numbers TX "515-0215-00" and RX "515-0215-01" boards, and TX "515-6940-00"  and RX "515-6940-01" boards
 +
 +
These opto switches are failing due to what seems to be an inferior part choice on the receiver side. The receiver seems to lock the switch in an "open" position, even if the IR light is blocked. Power cycling the RX board seems to "reset" and temporarily "fix" it.
 +
 +
Stern has not currently supplied a schematic or part list for this board, so it's difficult to find out what the original parts are, but due to the fact the IR transmitter LED and the IR receivers IR frequencies need to be matched really close to detect properly, both must be replaced with a new matched set.
 +
 +
The same parts work for the old and new part numbered boards.
 +
 +
* Replace the TX IR LED with "HSDL-4220" Lite-on 875nm 30 deg. IR LED.
 +
* Replace RX phototransistor with "SFH313FA" Osram 870nm NPN transistor.
 +
* Replace the switching transistor "2N7002" for the sake of reliability.
 +
 +
The 2N7002 transistor is an extremely small surface mounted transistor, and it can be difficult to line up and solder in place.
 +
 
===Display problems===
 
===Display problems===
 
Starting with Pirates of the Caribbean (a S.A.M. board set game), Stern replaced the normal Plasma Dot Matrix Display on European models with an LED variant because of the RoHS law. They first used PinLED DMDs, and later, switched to a red DMD specifically made for them (520-5052-05). The debate which looks better will be going on for your remaining lifetime and continue right into your next few lives.
 
Starting with Pirates of the Caribbean (a S.A.M. board set game), Stern replaced the normal Plasma Dot Matrix Display on European models with an LED variant because of the RoHS law. They first used PinLED DMDs, and later, switched to a red DMD specifically made for them (520-5052-05). The debate which looks better will be going on for your remaining lifetime and continue right into your next few lives.
Line 637: Line 1,018:
 
See [[Common Flipper Troubleshooting]] for general flipper information.
 
See [[Common Flipper Troubleshooting]] for general flipper information.
  
−
[[File:Ghostbusters_flipper_assembly.JPG|200px|thumb|left|Flipper assembly on Ghostbusters]]<br><br>
+
[[File:Ghostbusters_flipper_assembly.JPG|200px|thumb|left|Flipper assembly on Ghostbusters]]
 +
<br clear=all>
 +
 
  
 +
====Issues with Coil Stops with Brass Bushings====
 +
[[File:bushing.jpg|200px|thumb|left|Coil stop with brass bushing vs without brass bushing]]
 +
Stern switched to a coil stop bracket that uses a brass bushing behind the coil stop. After some time and the repeated hits of the flipper's plunger, the bushing gets mashed down and deformed. The stop develops excess movement and wears the brass bushing out even further and the stop becomes very loose. This causes damage to the coil sleeve and plunger end due to the movement and misalignment. Brass dust can then be found sprinkled in the bottom of the cabinet just inside the coin door. This damage causes the plunger to drag or even catch in the sleeve. It is recommended to replace the coil stop bracket with ones that do not have this brass bushing. A loose stop that has just started to wear out its bushing can temporarily be repaired by pushing the stop tightly against the bracket and peening the riveted end with a ball peen hammer. A center punch and some carefully applied hits near the center and the edges will also tighten up the factory rivet. The stop's brass bushing (if there is any left) will still continue to deform, and the stop will work loose again, but this quick fix will buy some time until the coil stop can be replaced.
 
<br clear=all>
 
<br clear=all>
 +
 +
====Flipper button switch contacts====
 +
The contact area in flipper button switches is a thin, laser welded piece of wire. If this contact part falls off, the related flipper starts acting erratically. Check that both sides of the contacts are intact.
 +
[[File:Stern-Spike2-Flipper-Switch.jpeg|200px|thumb|none|A flipper button switch]]
  
 
===Pop bumper problems===
 
===Pop bumper problems===
Line 697: Line 1,087:
  
 
[https://sternpinball.com/wp-content/uploads/2018/10/Stern-SB187-1.pdf Ecto Goggles Shield Kit Service Bulletin]
 
[https://sternpinball.com/wp-content/uploads/2018/10/Stern-SB187-1.pdf Ecto Goggles Shield Kit Service Bulletin]
 +
 +
 +
'''Guardians of the Galaxy''' Groot's motor behaves erratically. Motor itself seems fine, but ceases to function at random. The driver board for the motor is at the end of a very long SPI bus daisy chain, starting from the lower node board, going through several LED driver boards before the motor board. A bad connection in any of the previous board causes the motor control board to freeze. This issue also causes erratic LED behavior, but in the beginning it may be too brief to notice. Reseat the SERIAL IN/OUT connectors above the motor control board one by one. Once you find the problematic one, then replace the connector.

Latest revision as of 22:19, 10 July 2024

ExclamationPoint.jpg
Note: This page is a work in progress. Please help get it to a completed state by adding any useful information to it.



Click to go back to the Data East/Sega/Stern pinball repair guides index.

1 Stern SPIKE™ System Repair

1.1 Introduction

The SPIKE™ System is the current board system used by Stern Pinball. The first full production game to use the SPIKE Board Set was Wrestlemania in 2015. The SPIKE architecture is a large departure from prior board set architectures. Per Stern, "The SPIKE Pinball system is rugged, distributed, and embedded platform custom-designed for the rigors of the pinball machine environment".

The SPIKE system is comprised of a CPU board and a series of several "node boards" that are powered from a 48VDC power bus. Each SPIKE "node board" will regulate this 48VDC down to the proper voltage required to operate the "devices" under control of that node (lamps, coils, switches, etc). Nodes are connected with standard CAT 5e (or better) 8 conductor Ethernet wiring although the interface protocol is not Ethernet, and connecting a SPIKE node to computer Ethernet will damage the board (per Stern). There are several node boards mounted to the bottom side of the playfield to control the various lamps, coils, and switches on the playfield. There is one "cabinet" node board located next to the plumb bob tilt assembly which controls start button, tilt, coin door, diagnostic switches, dollar bill acceptor, shaker motor, ticket dispenser, coin meters, etc.

1.2 Games

1.2.1 SPIKE 1

Date Name Pro Premium Limited Edition
2012 Transformers, The Pin One Model
2013 Avengers, The Pin One Model
2015 Wrestlemania Yes No Yes (400 max)
2015 Whoa Nellie! Big Juicy Melons™ One Model
2015 KISS Yes Yes Yes (600 max)
2015 Game of Thrones Yes Yes Yes (700 max)
2016 Ghostbusters Yes Yes Yes (500 max)
2016 Pabst Can Crusher One Model
2016 Spider-Man, The Pin One Model
2018 Primus One Model
2018 Supreme One Model

1.2.2 SPIKE 2

Date Name Pro Premium Limited Edition Other Models
2016 Batman 66 No Yes Yes (240 max) Super LE (80 max)
2017 Aerosmith Yes Yes Yes (500 max)
2017 Star Wars (Stern) Yes Yes Yes (800 max)
2017 Guardians of the Galaxy Yes Yes Yes (600 max)
2018 Iron Maiden (Stern) Yes Yes Yes (500 max)
2018 Deadpool Yes Yes Yes (500 max)
2018 Beatles Gold (1614 max) Platinum (250 max) Diamond (100 max)
2019 The Munsters Yes Yes Yes (600 max)
2019 Black Knight: Sword of Rage Yes Yes Yes (600 max)
2019 Jurassic Park (Stern) Yes Yes Yes (500 max)
2019 Star Wars Pin One Model
2019 Elvira's House of Horrors No Yes Yes (400 max) Signature Edition (50 max), 40th Anniversary Edition (199 max) released 10/2021
2019 Stranger Things Yes Yes Yes (500 max)
2020 Heavy Metal One Model
2020 Teenage Mutant Ninja Turtles (Stern) Yes Yes Yes (500 max)
2020 The Avengers Infinity Quest Yes Yes Yes (500 max)
2020 Led Zeppelin Yes Yes Yes (500 max)
2021 Star Wars The Mandalorian Yes Yes Yes (750 max)
2021 Godzilla Yes Yes Yes (1000 max)
2021 Jurassic Park Pin One Model
2022 Rush Yes Yes Yes (1000 max)
2022 James Bond 007 Yes Yes Yes (1000 max) 60th Anniversary LE (500 max)
2023 Foo Fighters Yes Yes Yes (1000 max)
2023 Venom Yes Yes Yes (1000 max)
2023 Jaws Yes Yes Yes (1000 max)
2024 John Wick Yes Yes Yes (1000 max)

1.3 Recommended Documentation

1.3.1 Manuals

As always, it is highly recommended to possess a game manual. Every game manual is full of detailed information regarding game specific switch, lamp, and coil assignments. Equally, details for maneuvering through test, audit, and bookkeeping screen menus, schematics for all boards used, and game specific mechanical assemblies are included.

The most current versions of the game manuals are posted on Stern's website in the support section.

  • Wrestlemania manuals - Pro, LE
  • Jurassic Park The Pin - Manual

1.3.2 Schematics

Some Stern Spike schematics can be found here.

1.3.2.1 SPIKE 1

Game 520-6936-01 or 520-6936-10
SPIKE-1 CPU
Node Board 		520-5319-00
Cabinet
Node Board 		520-6967-xx
Cabinet
Node Board 		520-6935-10
8-Coil Playfield
Node Board 		520-6985-72
8-Coil Playfield
Node Board 		520-5322-xx
32-Light & Switch
Node Board 		520-5329-10
4-Coil Playfield
Node Board 		520-5345-01
Trough Serial Opto
Receiver Extension
Board 		Topper Misc.
Whoa Nellie Node 0 Node 1 Node 8 Node 10 Node 9 & 11
KISS Prem/LE Node 0 Node 1 Node 8, 9, & 10 Node 11 8a
Game of Thrones Prem/LE Node 0 Node 1 Node 8 & 11 Node 9 & 10 8b
Ghostbusters Prem/LE Node 0 Node 1 Node 8 & 9 Node 10 8a Node 12 (optional) Node 24 - 520-6988-00 LCD Node (Ecto Goggles)

1.3.2.2 SPIKE 2

Game 509-1000-00
SPIKE-2 CPU
Node Board 		509-1003-01
SPIKE-2 CPU
Node Board 		520-6967-xx
Cabinet
Node Board 		520-7017-72 or 520-1057-00
8-Coil Playfield
Node Board 		520-6998-72
4-Coil Playfield
Node Board 		520-6976-72
SPI Core Playfield
Node Board 		520-7001-00, 520-7001-00, 520-1051-00, or 520-8516-00
Trough Serial Opto
Receiver Extension
Board 		520-6996-00A
Motor Driver Board 		Topper Misc.
Batman 66 Node 0 Node 1 Node 8 & 9 8a 9c Node 10 - 520-7019-72 Turntable Node,
Node 24 - LCD Node (Villain Vision)
Aerosmith Node 0 Node 1 Node 8 & 9 8a 8e Node 10 - 520-5329-10 Playfield 48V 4-Coil node board (Prem/LE only)
Star Wars (Pro) Node 0 Node 1 Node 8 & 9 Node 10 8a
Star Wars (Prem/LE) Node 0 Node 1 Node 8 & 9 Node 11 Node 10 8a 9d
Guardians of the Galaxy (Pro) Node 0 Node 1 Node 8 & 9 8a
Guardians of the Galaxy (Prem/LE) Node 0 Node 1 Node 8 & 9 Node 11 Node 10 8a 9b
Iron Maiden (Pro) Node 0 Node 1 Node 8 & 9 8a
Iron Maiden (Prem/LE) Node 0 Node 1 Node 8 & 9 Node 10 8a
Deadpool Node 0 Node 1 Node 8 & 9 8a
Beatles Node 0 Node 1 Node 8 & 9 8a
Munsters Node 0 Node 1 Node 8 & 9 8a
Black Knight: Sword of Rage Node 0 Node 1 Node 8 & 9 8a
Jurassic Park (Pro) Node 0 Node 1 Node 8 & 9 8a
Jurassic Park (Prem/LE) Node 0 Node 1 Node 8 & 9 8a 9b Node (unlabeled) - 520-8424-00 - (Back panel) Stepper Motor Driver board
Star Wars The Pin Node 0 Node 8 8c
Elvira's House of Horrors Node 0 Node 1 Node 8 & 9 8a Node 12 (optional)
520-6998-72
Stranger Things Node 0 Node 1 Node 8 & 9 8a Node 12 (optional) Node 9a1 - 520-8418-00 - Dual Motor Driver Lamp board
Heavy Metal Node 0 Node 8 8c
Teenage Mutant Ninja Turtles Node 0 Node 1 Node 8 & 9 8a Node 9a5 - 520-8418-00 - Motor Driver Board-Lamp Drive (Prem/LE only)
The Avengers Infinity Quest Node 0 Node 1 Node 8 & 9 8a Node 12 (optional)
520-6976-72 		Node 8c - 520-8466-00 - Magnetic Angle Sensor
Led Zeppelin Node 0 Node 1 Node 8 & 9 8a Node 12 (optional)
520-8087-72 		Node 2 (optional) - 520-8087-72 - SPI Node-PWM - Cabinet Lighting
The Mandalorian Node 0 Node 1 Node 8 & 9 8a Node 12 (optional)
520-8530-00
HDMI Adapter-Topper
Godzilla Node 0 Node 1 Node 8 & 9 8a Node 12 (optional)
520-8511-00 		Node 4 - 509-2020-00 - QR Reader Node
Node 10 - 520-5781-02 - Stepper Motor (Prem/LE only)
Jurassic Park The Pin Node 0 Node 8 8b
Rush Node 0 Node 1 Node 8 & 9 8a Node 12 (optional)
520-6998-72 		Node 4 - 509-2020-00 - QR Reader Node
Node 2 (Optional) - 520-8511-00 - Expression Lighting
Node 9a4 - 520-8543-00 - Time Machine PCB (Prem/LE only)
Node 10 - 520-5781-02 - Stepper Motor (Prem/LE only)
James Bond (Pro/Premium/LE) Node 0 Node 1 Node 8 & 9 8a Node 12 (optional)
520-8087-72 		Node 4 - 509-2020-00 - QR Reader Node
Node 9b - 520-6996-00 - PCB Serial Dual Motor Driver (Prem/LE only)
James Bond (60th Anniversary LE) Node 0 Node 1 Node 8 & 9 Node 7 8a Node 12 (optional)
520-8087-72 		Node 4 - 509-2020-00 - QR Reader Node
Node 6 - 520-5379-14 - Stepper Motor Node Board
Foo Fighters Node 0 Node 1 Node 8 & 9 8a Node 12 (optional)
520-5370-72 		Node 4 - 509-2020-00 - QR Reader Node
Node 2 (Optional) - 520-5370-72 - Expression Lighting (Prem/LE only)

Notes:

  1. 509-1000-00 replaced by 509-1003-01
  2. For the Star Wars Pin (Home Edition), Node 8 subsumes the functions performed by the cabinet node board (typically Node 1 on other Spike machines).
  3. As per a service released in September 2022, node board 520-7017-72 (blue board) is being replaced by 520-1057-00 (green board). The boards were stated to be interchangeable.


1.3.3 Service Bulletins

Service bulletins detailed any problems or issues with games that were discovered after they were released. Stern publishes these on their service bulletins page.

Service Bulletin Date Game(s) Summary Notes
(unnumbered) 2022-09-30 General Parts advisory: Node board update Node board 520-7017-72 (blue board) is being replaced by 520-1057-00 (green board). The boards were stated to be interchangeable.
(unnumbered) 2022-06-07 Rush Service advisory: Rush scoop switch
(unnumbered) 2022-06-07 Rush Service advisory: Rush scoop protector
(unnumbered) 2022-05-26 Avengers Infinity Quest Service advisory: Avengers spinning disc adjustment
(unnumbered) 2020-01-03 SPIKE 2 games Service advisory: Guided setup mode
(unnumbered) 2018-05-01 General Service advisory: Shaker motors
191 2017-12-29 Guardians of the Galaxy Metal bracket protector For GOTG Pro games prior to serial number 275330
190 2017-11-16 Ghostbusters, Batman, Aerosmith, Star Wars Core node capacitor service
189 2017-11-16 Ghostbusters, Batman, Aerosmith, Star Wars Core node stabilization
188 2016-12-30 Ghostbusters Ghostbusters flasher #129
187 2016-11-21 Ghostbusters Ecto goggles shield kit
186 2015-08-27 KISS, Metallica, X-Men Scoop switch adjustment
185 2015-07-20 Whoa Nelly, Kiss, WWE SPIKE system updates
184 2015-06-12 General Third party shaker motors



1.4 Technical Info

1.4.1 The SPIKE Board Set

Stern has issued a technical video discussing the Spike 1 system boards: https://www.youtube.com/watch?v=MvefdrNaAPg
There is a well done video by Stern, featuring George Gomez, describing the Spike 2 system boards:
https://www.youtube.com/watch?v=d1xdmgeAylQ&t=190s

Ghostbusters Spike 1 board


Spike 1 CPU board installed in a Ghostbusters.


1.4.2 Accessing Bookkeeping, Settings, and Diagnostic Modes

Ghostbusters coin door pushbuttons




Spike system games use four pushbutton switches (located on the coin door) to access the bookkeeping, adjustments, and diagnostics very much like Williams WPC series machines do. The black pushbutton enters the menu while the two red + and - pushbuttons step you through the menu (also act as volume up and volume down). If you want to go backwards, push the green button (it acts like "escape" function).

1.4.3 Node Board Information

Node board library.

1.4.3.1 SPIKE 1 CPU - 520-5318-01

Node Board 0, part number 520-5318-01.


Node 0 in the backbox. Used in the home version "The Pin" games: Avengers/Transformers The Pin

1.4.3.2 SPIKE 1 CPU - 520-6936-xx

Node 0 in the backbox.

Part numbers:

  • 520-6936-00
  • 520-6936-00A
  • 520-6936-01
  • 520-6936-10 (Video Out Support; Backward compatible with -00)
  • 520-6936-10B
  • 520-6936-11

1.4.3.3 SPIKE 2 CPU - 509-1000-01 & 509-1003-01

Node 0 in the backbox.

  • 509-1000-01 was only used on the first two SPIKE 2 games (Batman 66 and Aerosmith).
  • 509-1003-01 was used in all subsequent SPIKE 2 games to date.

This CPU came in two variations: a 50Hz version for European games, and a 60Hz version for USA games. The European electrical grid runs on 50Hz power, while the USA runs on 60Hz.

If bringing a game from one electrical region to another, two known methods to convert a game are to replace the CPU, or use an external voltage transformer with a frequency converter.

Node Board 0, part number 509-1003-01.


Node 0 in the backbox. Used in the home version "The Pin" games: Avengers/Transformers The Pin

1.4.3.4 Node Board - 520-7019-72A

Stern Node board from BM66 with Q5 blown and removed.
520-7019-72ABack.jpg


This node board was used on at least BM66.

1.4.3.5 Node 10 Board - 520-5781-02

The part that is most often damaged on this board is U1, a TMC5041-LA.

Stern Node 10 board.
A blown Node 10 board with the typically blown TMC5041 shown.


1.4.3.6 520-5331-00D Grinder Board

The "Grinder" board.

The "Grinder" board was used in at least AC/DC and Metallica (both S.A.M. games) to drive general illumination LEDs. Schematics for the board can be found in the Metallica manual (best) and the AC/DC manual.

It appears to be an "open loop" driver, with one way communication from the MPU/Driver to the Grinder board via the ethernet connector. The onboard microcontroller must be flashed with Stern proprietary code, making owner repair of this board problematic.

Although the schematics indicate use of an A8498 voltage regulator, that part does not appear on the actual board, nor do solder pads to accommodate the part.

Part Function Locations (size) Availability
ATTiny4313-SU microcontroller U3 (SOIC-20) not available as of 3/5/23
STP16CPC26TTR LED driver U2, U5, U6 (TSSOP24) not available as of 3/5/23
A8498SLJTR-T Voltage regulator U7, not stuffed not available as of 3/5/23
ZXMN7A11KTC 70V N-Channel 6.1A MOSFET Q1-Q4 available as of 3/5/23
MAX232DR 11KTC RS232 interface U4 (SOIC-Narrow-16) available as of 3/5/23


1.4.3.7 Cabinet Node Board - 520-6967-72B

Cabinet Node Board 520-6967-72B. Note that U14 (an MP24943 buck converter) on this board has been damaged.


LED indicators on the board:

  • Red: 48 volts is present at the board
  • Yellow: Board is communicating with cpu board
  • Green: 6 volts is present at the board

Ghostbusters # 520-6967-00 (replaced by 520-6967-72) Cabinet Node Board connectors:

  • CN1: Universal Card link (if present on your particular board)
  • CN2: Low tickets warning in ticket dispenser
  • CN3: To Meter #1 (usually coin counter, use a 12 volt meter)
  • CN4: To Meter #2 (usually tickets out, use a 12 volt meter)
  • CN5: From Coin Door coin switches and coin entry LED lights
  • CN6: Left cabinet switch inputs (tilt, start, etc)
  • CN7: Right cabinet switch inputs
  • CN8: From electronic coin mechanism (for export machines only)
  • CN9: From Dollar Bill Acceptor
  • CN10: From coin door volume and diagnostic switches
  • CN11: Ticket dispenser
  • CN12: Volume and diagnostic switches output to cpu board connector CN25
  • CN13: RJ45 Node Data Bus
  • CN14: 48 volts DC power input
  • CN15: Optional spare LED +5 volt power source
  • CN16: To shaker motor

1.4.3.8 LED driver board - 520-8533-00A

Cabinet Node Board 520-8533-00A. This board appears to drive LED lamps.
Cabinet Node Board 520-8533-00A. This board appears to drive LED lamps.


1.4.3.9 32-Light & Switch Board - 520-5322-xx

There are two known board revisions: Revision E and revision H (notated on the board as 520-5322-00E or 520-5322-00H)

This board currently has 5 known designations based on the game code installed on it. Otherwise, the physical hardware appears to be the same. Note that installing a board in the wrong game will (at minimum) prevent it from working.

  • 520-5322-00: Some documentation indicates when this was offered online purchase, it was in an unconfigured board with no code (thus did not work in certain games, such as Star Trek). Game manuals indicate this board originally came with WWE Wrestlemania Pro (SPIKE game), Star Trek Pro/Premium/LE (SAM games), KISS Pro/Premium/LE (SPIKE game)
  • 520-5322-10: The Walking Dead Pro/Premium/LE (Note: SAM games)
  • 520-5322-20: Star Trek Pro/Premium/LE (Note: SAM games)
  • 520-5322-30: WWE Wrestlemania Pro, KISS Pro (and likely Premium/LE), Pabst Can Crusher, Primus (SPIKE games)
  • 520-5322-72: Whoa Nelly, Pabst Can Crusher, Primus (SPIKE games)

1.4.3.10 Spike 2 Dual Motor Control Board - 520-8414-00

Spike 2 Dual Motor Drive Board, 520-8414-00. Note that this board has a blown L6206Q driver chip.


This board appears on at least the following games:

  • Elvira's House of Horrors
  • Mandalorian
  • Stranger Things (drives the ramp)
  • Teenage Mutant Ninja Turtles


1.4.3.11 Spike 2 Dual Motor Control Board - 520-5781-02

Spike 2 Dual Motor Drive Board, 520-5781-02.


This board appears on at least the following games:

  • Godzilla Premium and LE
  • Rush Premium and LE



1.4.3.12 Trough Serial Opto Receiver Extension Board

Part numbers:

  • 520-8516-00 (current version)
  • 520-1051-00
  • 520-7001-00
  • 520-5345-00 (initial version)

1.4.4 Dollar Bill Acceptors

The Spike system machines come with a bill acceptor coin door and dollar bill acceptor wiring harness already installed. Many are wired for using 120 volts AC powered bill acceptors (Mars/MEI AE-2411-300 is recommended), but there are reports some machines are wired for 12 volts DC models instead. Here is a Ghostbusters which comes wired for 120 volts AC power for the bill acceptor.

Ghostbusters bill acceptor connector




1.4.5 Optional Equipment

This power supply for 12 volt and 5 volt accessory items has four Molex output jacks and is fused:

Power supply for backbox mounting

This power supply is the same as above except it mounts in the lower cabinet near the cashbox:

Power supply for lower cabinet mounting

This 8 way splitter provides eight 12 volt only Molex jacks and mounts only in the backbox:

8 Way splitter for backbox mounting

Knocker Kit provides a real knocker:

Real Knocker Kit for Spike 1 and Spike 2


1.4.6 Linux OS

Spike's central CPU node in the backbox runs Linux. The hardware is a derivative of the NXP i.MX6 Wandboard.

The SD card has ext4 partitions, the most interesting being the root filesystem and /games. The rootfs contains a yocto build with no toolchain or kernel headers, but cross-compilation is possible using gcc-arm-linux-gnueabihf.

There is a serial console on connector CN2. This connector is generally not populated. It's also possible to configure the Ethernet port for remote access.

The game executable has a text-based interactive debug interface with some interesting options: 

  commands:
          adj: perform operations on adjustments.
          amp: amp system interface.
          aud: perform operations on audits.
          coil: fire a coil.
          credit: manipulate credits.
          debug: get debug information.
          display: display system interface.
          dsp: DSP interface.
          knocker: perform operations on the knocker.
          le: lamp effect system interface.
          mode: interact with modes.
          node: node diagnostics commands.
          nv: get non-volatile ram info.
          proc: get information about processes.
          red: redemption interface.
          replay: replay interface.
          scene_cache: scene cache system interface.
          score: manipulate player scores.
          sound: sound system interface.
          textsafe: show text safe region.
          video_display: video display system interface.

Some more information can be found here: 

* https://docs.missionpinball.org/en/latest/hardware/spike/connection.html
* https://pastebin.com/raw/RryUb8iC

1.5 Problems and Solutions

1.5.1 Power Problems

The main power supply is 48 volts @ 10.5 amps and has a cooling fan. Some versions have the fan on the front of the power supply while others may have the fan mounted on the top. Power supply is a Mean Well # RSP-500-48 (Jameco Electronics # 2198014).


Ghostbusters Pro 48 volt power supply




Ghostbusters wiring interconnection label.

Ghostbusters interconnection wiring label




1.5.1.1 Excessive "clicking" in some 2023 games

The real culprits causing excessive clicking are the capacitors numbered in this Power Distribution Board diagram. Image taken from PinSide post by "PinMonk"
The real culprits causing excessive clicking are the capacitors numbered in this Power Distribution Board diagram. Image taken from PinSide post by "PinMonk"

SternSpikePS.jpg
An excellent analysis and repair recommendation was posted by PinSider "PinMonk" regarding excessive "clicking" in some modern Stern games.

PinSideLogo.png The post can be found here.

1.5.1.2 Noisy Power Supply Fan

There have been reports of the fan on the switching regulator 48 volt power supply becoming too loud. There is now a plug n play replacement fan kit. The fan in the kit is a lot quieter.

Spike Quiet Fan Kit

1.5.1.3 Relocating the Power Switch

One complaint with Spike machines is the fact the power on-off switch is located in the backbox. If the machine is located in a bank of machines, it may be difficult to reach the power switch. Some people have ordered a Stern # 515-7085-00 Power Switch and Bracket assembly and mounted it in the usual right front bottom cabinet location. Then wires are run up to the backbox and connected in place of the backbox power switch. Stern installs a shaker motor in the right front of the cabinet now. So the shaker motor (if installed) must be relocated farther back in the cabinet (about 6 inches) to the other side of the wooden divider.

Stern Power Switch and Mounting Bracket Assembly

1.5.2 MPU boot issues

If the MPU doesn't boot, check that the memory card is firmly seated in its slot on the MPU board. Also, you can try re-seating the memory card. Sometimes this fixes Spike games that won't boot.

1.5.3 Game resets

Some reset/slam tilt problems have been traced to the shaker motor. Please check the shaker motor service advisory

Game software bugs are often the source of random crashes. This manifests itself as the screen freezing while the flippers still work for a while. The OS will eventually restart the game program and it returns to the attraction mode. This is very common in early software revisions for new titles.

A failing memory card can also cause game resets. This causes the game to crash when specific video is running or it may just go into a boot loop.

1.5.4 Stern Insider Connected Displays Invalid Factory Config Message

As of September 2022, it was discovered that installing a new replacement Spike 2 MPU into a game causes the Stern Insider Connected feature to stop working and display the message when accessing the Insider Connected setup screen: "This machine has an invalid Factory Config. Contact your distributor."

To fix the problem, contact Stern support. The MPU will need to be shipped to Stern, where they will use proprietary software to program the board. Once the MPU is returned and installed, Stern Insider Connected should start functioning again.

1.5.5 Solenoid problems

1.5.6 Lamp problems

Spike system uses LED driver boards that are daisy chained together and receive their communication from the nearest node board over SPI bus. Each node board may have their own set of LED driver boards. The LED driver boards themselves often house several surface mounted LEDs to cover areas with higher concentration of feature lights. The LED boards also have direct outputs to either individual single LED boards or larger boards that house multiple LEDs. These smaller LED boards have no onboard logic. Note that LED driver boards are not the only type of devices controlled by the SPI bus, as there are for example motor control boards that are part of the LED driver board daisy chains.

Typical Spike light control layout. Node board (Green) controls two LED driver boards (cyan) that again have their own directly controlled LED boards (yellow)


1.5.6.1 Directly controlled LED boards

These boards house single or multiple LEDs and have no other logic on them. They are fed 5 volts by the LED driver board above them and as many grounds as there are LEDs on the board. RGB LEDs have individual grounds for each color. The simplest variant has typically the wires soldered directly onto it, larger ones have connectors. Typical failure modes include cracked soldering points and loose wires. Should the LEDs themselves fail, surface mount soldering skills are needed. All normal shaped boards are however readily available from Stern.

Three single LED boards and one multi-LED board with RGB LEDs


1.5.6.2 LED driver board

These boards receive lamp control commands from a node board above them and translate that into individual LED control signals. The signals and 5 volt feed for the logic and LEDs comes through the connector marked as "SERIAL IN". The next board in the chain is connected to the "SERIAL OUT" connector. The rest of the connectors are individual LED drives. These boards also often have LEDs on them. Replacing components requires surface mount soldering skills, but the most commonly cracked soldering points tend to be the Molex connectors, that can be reflowed with a thin soldering iron tip. Since the LEDs on these boards need to be on specific places, these are game-specific and in some cases game variant (pro/premium/LE) specific.

One very common failure mode is bad connection for the serial in/out connector. This causes complete blackout, severe flickering or incorrectly lit lamps. Since the following board(s) receive their data over the same connector, the symptom is also observed in the following boards, including non-LED boards.

LED driver board from The Mandalorian

1.5.7 Switch problems

1.5.7.1 Long Range Opto Problems

"Long Range Opto" - part numbers TX "515-0215-00" and RX "515-0215-01" boards, and TX "515-6940-00" and RX "515-6940-01" boards

These opto switches are failing due to what seems to be an inferior part choice on the receiver side. The receiver seems to lock the switch in an "open" position, even if the IR light is blocked. Power cycling the RX board seems to "reset" and temporarily "fix" it.

Stern has not currently supplied a schematic or part list for this board, so it's difficult to find out what the original parts are, but due to the fact the IR transmitter LED and the IR receivers IR frequencies need to be matched really close to detect properly, both must be replaced with a new matched set.

The same parts work for the old and new part numbered boards.

  • Replace the TX IR LED with "HSDL-4220" Lite-on 875nm 30 deg. IR LED.
  • Replace RX phototransistor with "SFH313FA" Osram 870nm NPN transistor.
  • Replace the switching transistor "2N7002" for the sake of reliability.

The 2N7002 transistor is an extremely small surface mounted transistor, and it can be difficult to line up and solder in place.

1.5.8 Display problems

Starting with Pirates of the Caribbean (a S.A.M. board set game), Stern replaced the normal Plasma Dot Matrix Display on European models with an LED variant because of the RoHS law. They first used PinLED DMDs, and later, switched to a red DMD specifically made for them (520-5052-05). The debate which looks better will be going on for your remaining lifetime and continue right into your next few lives.

1.5.8.1 LED DMD bad vertical line

Stern bad LED DMD


If a game is always showing a semi-bright vertical line on the DMD, usually one of the LED segments is bad. Fortunately the bad segment can be found easily. As shown in the picture to the left, one pixel in the line is always dark. This 8x8 segment is the bad guy and needs to be replaced. The good thing is that this problem usually occurs with NIB games just after a few hours or days of game play so the DMD is still under warranty. If not, ask Stern for the availability of the LED segments. When replacing a block, be advised that the vias are small and are difficult to remove without the proper equipment.

1.5.9 Sound problems

The Spike 1 cpu board connector CN1 is the 2 channel backbox speaker output (two 4 ohm @ 10 watt 4 inch square speakers, use Stern # 031-5004-02). Connector CN4 is the lower cabinet woofer speaker output (one 8 ohm @ 20 watt 8 inch round speaker, use Stern # 031-5007-01).

CN1 pinout:

  • 1: Black-White backbox right speaker -.
  • 2: Red-White backbox right speaker +.
  • 3: Key
  • 4: Black backbox left speaker -.
  • 5: Red backbox left speaker +.

CN4 pinout:

  • 1: Yellow-Black lower cabinet woofer speaker output -.
  • 2: Yellow-White lower cabinet woofer speaker output +.

CN18 (TRS headphone 3.5mm jack) pinout:

  • TIP: headphone left, 8 ohm, 200mw maximum output
  • RING: headphone right, 8 ohm, 200mw maximum output
  • SLEEVE: Audio ground

CN27 Preamp (line) output to feed sound to an external monaural amplifier or subwoofer amplifier:

  • 1: Line out +, 600 ohms
  • 2: Line out ground
  • 3: Line out -, 600 ohms


The latest game codes now have speaker impedance settings for whether 4 ohm or 8 ohm speakers are installed in the machine. Added UTIL->VOL adjustments, Speaker Balance, backbox speaker type, and cabinet speaker type for Spike 1 and 2 games.

1.5.10 Flipper problems

See Common Flipper Troubleshooting for general flipper information.

Flipper assembly on Ghostbusters



1.5.10.1 Issues with Coil Stops with Brass Bushings

Coil stop with brass bushing vs without brass bushing

Stern switched to a coil stop bracket that uses a brass bushing behind the coil stop. After some time and the repeated hits of the flipper's plunger, the bushing gets mashed down and deformed. The stop develops excess movement and wears the brass bushing out even further and the stop becomes very loose. This causes damage to the coil sleeve and plunger end due to the movement and misalignment. Brass dust can then be found sprinkled in the bottom of the cabinet just inside the coin door. This damage causes the plunger to drag or even catch in the sleeve. It is recommended to replace the coil stop bracket with ones that do not have this brass bushing. A loose stop that has just started to wear out its bushing can temporarily be repaired by pushing the stop tightly against the bracket and peening the riveted end with a ball peen hammer. A center punch and some carefully applied hits near the center and the edges will also tighten up the factory rivet. The stop's brass bushing (if there is any left) will still continue to deform, and the stop will work loose again, but this quick fix will buy some time until the coil stop can be replaced.

1.5.10.2 Flipper button switch contacts

The contact area in flipper button switches is a thin, laser welded piece of wire. If this contact part falls off, the related flipper starts acting erratically. Check that both sides of the contacts are intact.

A flipper button switch

1.5.11 Pop bumper problems

Ghostbusters pop bumper assemblies


1.5.12 Opto problems

1.5.13 Shaker Motor Problems

The shaker motor connects to connector CN16 (CN2 on early boards) on the cabinet node board located next to the plumb bob tilt. It will be labeled Shaker Motor.

The pinout of CN16 is this:

  • 1: Shaker motor - (Blue wire)
  • 2: Shaker motor - (optional extra connection)
  • 3: Shaker motor + (optional extra connection)
  • 4: Key
  • 5: Shaker motor + (Red wire)

Genuine Stern SPIKE Shaker motor causes mysterious slam tilts during game:

Service Advisory 2018

If your shaker motor is damaged or worn out, you can purchase just the motor itself if desired.

Replacement Spike/Sam shaker motor only

1.5.13.1 Third Party Shaker Motors

All current SPIKE™ games allow for a shaker motor, but it should be a SPIKE shaker motor, not a SAM-system shaker motor (SAM is the previous system). After the initial launch of SPIKE™ games, it was discovered that motors from third-party manufacturers (in particular Pinball Life) had a capacitor that caused problems, and will blow out the node board. Service Bulletin 184 advises against using third-party shaker motors entirely. Installation will void the game's warranty.

The symptom of this problem is that the Start button, plumb bob, and coin door GI lamps won't work; that is, the game becomes unplayable.

Some owners have reported that removing the capacitor from the third-party motor will fix the problem. Stern's public position is that owners should spend the extra money and buy an OEM motor. Many vendors do not clearly differentiate between an OEM part and a third-party part.

Genuine Stern Spike shaker motor kit

Third party Spike shaker motor kit

All SPIKE system games already have the holes for a shaker motor pre-drilled and 10-32 T-Nuts already installed for mounting the shaker motor to the right of the cashbox.

1.5.14 Missing Playfield Slide Brackets on Pro Models

Starting with the Pro model of WWE, Stern removed the playfield slide brackets and replaced them with a couple of cheap pieces of threaded rod covered in heat shrink tubing and a ball shooter tip. This was so you could pull the playfield toward you a bit and rest those "pegs" on the lockdown receiver to service under the playfield. That didn't work very well if you needed to get to something at the very back of the playfield. Pinball Life has reproduced the playfield slide brackets as a set. Once installed, the playfield can be pulled out a lot farther to make it easier to work at the rear of the playfield. Premium and LE models already have the playfield slide brackets installed.

Spike cabinet playfield slide bracket kit

Note: It now appears, starting with Iron Maiden, that Stern has gone back to installing the metal slide brackets on the bottom of the playfields on Pro models.

1.6 References

1.7 Game Specific Problems and Fixes

Ghostbusters Premium and LE models damaged Ecto Goggles LCD screen. Air balls flying up and hitting/damaging the LCD screen on the Ecto Goggles unit. Stern issued a service bulletin about this problem and came up with a metal shield to install on the machine to prevent this from happening.

Ecto Goggles Shield Kit Service Bulletin


Guardians of the Galaxy Groot's motor behaves erratically. Motor itself seems fine, but ceases to function at random. The driver board for the motor is at the end of a very long SPI bus daisy chain, starting from the lower node board, going through several LED driver boards before the motor board. A bad connection in any of the previous board causes the motor control board to freeze. This issue also causes erratic LED behavior, but in the beginning it may be too brief to notice. Reseat the SERIAL IN/OUT connectors above the motor control board one by one. Once you find the problematic one, then replace the connector.

Retrieved from "https://www.pinwiki.com/wiki/index.php?title=Stern_SPIKE™_System_Repair&oldid=24625"