Difference between revisions of "Bram Stoker's Dracula"
| (4 intermediate revisions by the same user not shown) | |||
| Line 9: | Line 9: | ||
| − | Rule Sheet...see Dracula listing in IPDB [http://www.ipdb.org/machine.cgi?id=3072 | + | Rule Sheet...see Dracula listing in IPDB [http://www.ipdb.org/machine.cgi?id=3072 here]<br> |
[[Bram Stoker's Dracula Shop Guide]] | [[Bram Stoker's Dracula Shop Guide]] | ||
| − | |||
== WPC Specific Issues == | == WPC Specific Issues == | ||
| Line 20: | Line 19: | ||
'''Castle Lock releases more than one ball at a time'''<br> | '''Castle Lock releases more than one ball at a time'''<br> | ||
| − | If your Castle Lock "disappearing post" mechanism is worn, allowing | + | If your Castle Lock "disappearing post" mechanism is worn, allowing play (slop) in the steel rod that holds the balls in the lock mechanism, more than one ball may be released from the lock mechanism at a time. Original design calls for each ball to be released from the lock mechanism one at a time so that a single ball is auto-plunged during multi-ball, just like The Getaway: High Speed II. Balls may also "skip over" the lock mechanism. The solution is to either purchase a new bracket, or insert a 1/4 inch inside diameter "nyliner" into the "hogged out" top hole of the bracket. |
'''Balls "skip over" lock mechanism (aka disappearing post)'''<br> | '''Balls "skip over" lock mechanism (aka disappearing post)'''<br> | ||
| − | Improper adjustment of the wireform height may also cause balls to skip over the lock mechanism. You can lower the wireform height by shortening the plastic post that supports it. You'll have to remove the screws from the right ramp over the right sling, and perhaps the decorative "castle". | + | Improper adjustment of the wireform height may also cause balls to skip over the lock mechanism. You can lower the wireform height by shortening the plastic post that supports it. You'll have to remove the screws from the right ramp just over the right sling, and perhaps the decorative "castle". Remove about 1/16 - 1/8" and retest. If you've removed too much material, compensate with a #6 or #8 washer. |
<BR> | <BR> | ||
Return to [[Williams WPC]] page. | Return to [[Williams WPC]] page. | ||
Latest revision as of 13:28, 4 September 2011
 |
| Manufacturer | System | Year | Model | Produced |
|---|---|---|---|---|
| Williams | WPC-Fliptronics | 1993 | 50001 | 6,801 |
Rule Sheet...see Dracula listing in IPDB here
Bram Stoker's Dracula Shop Guide
1 WPC Specific Issues
2 Game-Specific Issues
Castle Lock releases more than one ball at a time
If your Castle Lock "disappearing post" mechanism is worn, allowing play (slop) in the steel rod that holds the balls in the lock mechanism, more than one ball may be released from the lock mechanism at a time. Original design calls for each ball to be released from the lock mechanism one at a time so that a single ball is auto-plunged during multi-ball, just like The Getaway: High Speed II. Balls may also "skip over" the lock mechanism. The solution is to either purchase a new bracket, or insert a 1/4 inch inside diameter "nyliner" into the "hogged out" top hole of the bracket.
Balls "skip over" lock mechanism (aka disappearing post)
Improper adjustment of the wireform height may also cause balls to skip over the lock mechanism. You can lower the wireform height by shortening the plastic post that supports it. You'll have to remove the screws from the right ramp just over the right sling, and perhaps the decorative "castle". Remove about 1/16 - 1/8" and retest. If you've removed too much material, compensate with a #6 or #8 washer.
Return to Williams WPC page.