Difference between revisions of "Pinball 2000 Repair"
| Line 15: | Line 15: | ||
Things like Data East's controller board was a copy of William's System 11 with some changes would go here. | Things like Data East's controller board was a copy of William's System 11 with some changes would go here. | ||
| − | ==Problems and | + | ==Problems and Solutions== |
| − | + | ===Power Problems=== | |
| − | ===Power | + | ===MPU boot issues=== |
| − | + | ===Game resets=== | |
| − | === | + | ===Solenoid problems=== |
| − | + | ===Lamp problems=== | |
| − | === | + | ===Switch problems=== |
| − | + | ===Display problems=== | |
| − | ===Display | + | ===Sound problems=== |
| − | + | ===Flipper problems=== | |
| + | ===Pop bumper problems=== | ||
==Game Specific Problems and Fixes== | ==Game Specific Problems and Fixes== | ||
Revision as of 11:26, 7 May 2011
 |
1 Introduction
Pinball 2000 was the answer to a failing pinball industry. This was the last system used in a pinball machine before Williams ceased production of pinball machines. The reasons for why Williams ceased production is highly debated and more information can be found here.
This system was a hybrid of normal pinball with a video aspect. Using a 19" arcade monitor and special playfield glass that is tinted to reflect the image, creating the illusion of holographic images. To be able to handle both the pinball and video aspects of the game, the designers of Pinball 2000 used an off the shelf, commercial PC, adding 2 proprietary pieces, the PRISM card, which contains the roms and booted the PC without a hard disk, and an audio amp. The PRISM card requires the Cyrix GX, a specific CPU and GPU to function, making the PC inside Pinball 2000 hard to replace. The biggest problem is that the PC component was already obsolete when Pinball 2000 was created in 1999 to reduce costs of manufacturing the game.
2 Games
- Revenge From Mars
- Star Wars Episode 1
- Wizard Blocks *
- Playboy *
* Denotes a game that was never produced
3 Technical Info
Things like Data East's controller board was a copy of William's System 11 with some changes would go here.
4 Problems and Solutions
4.1 Power Problems
4.2 MPU boot issues
4.3 Game resets
4.4 Solenoid problems
4.5 Lamp problems
4.6 Switch problems
4.7 Display problems
4.8 Sound problems
4.9 Flipper problems
4.10 Pop bumper problems
5 Game Specific Problems and Fixes
Be sure connectors are on coil lugs tight. Vibration can loosen them and burn the lugs, or on flipper coils if a connector slips off - they aren't insulated and can short to the next lug and take out a transistor for the flipper coil. LTG :)
6 Repair Logs
Did you do a repair? Log it here as a possible solution for others.