Difference between revisions of "WHO Dunnit"
Jump to navigation
Jump to search
m |
(→Game-Specific Issues: Who Dunnit reels) |
||
| Line 19: | Line 19: | ||
== Game-Specific Issues == | == Game-Specific Issues == | ||
| − | + | The stepper motors for the reels are a constant source of problems. If they aren't spinning at all or feel 'gritty when turned by hand, remove the entire reel assembly from the playfield and remove the stepper motors. Strip the motors, clean out all of the metal filings and rebuild. If they still fail to spin inspect the IDC connector plug, as the wires may break and not be noticable. Also check the LM339's on the reel control board. Also note that the 3 reels are different, there should be a marking 1A, 2A or 3A by the overlap point on the reel itself. | |
| − | |||
<BR><BR> | <BR><BR> | ||
Return to [[Williams WPC]] page. | Return to [[Williams WPC]] page. | ||
Latest revision as of 10:08, 3 July 2012
 |
| Manufacturer | System | Year | Model | Produced |
|---|---|---|---|---|
| Bally | WPC-Security | 1995 | 50044 | 2,416 |
WHO Dunnit Playing Tips and Rule Sheet
1 WPC Specific Issues
2 Game-Specific Issues
The stepper motors for the reels are a constant source of problems. If they aren't spinning at all or feel 'gritty when turned by hand, remove the entire reel assembly from the playfield and remove the stepper motors. Strip the motors, clean out all of the metal filings and rebuild. If they still fail to spin inspect the IDC connector plug, as the wires may break and not be noticable. Also check the LM339's on the reel control board. Also note that the 3 reels are different, there should be a marking 1A, 2A or 3A by the overlap point on the reel itself.
Return to Williams WPC page.