Difference between revisions of "The Simpsons Pinball Party"
Jump to navigation
Jump to search
| Line 9: | Line 9: | ||
[[File:TSPPTVRear.jpg|200px|thumb|left|Front view of the TV PCB board.]] | [[File:TSPPTVRear.jpg|200px|thumb|left|Front view of the TV PCB board.]] | ||
[[File:TSPPTVFront.jpg|200px|thumb|right|Rear view of the TV PCB board, showing the circuit layout.]]<br> | [[File:TSPPTVFront.jpg|200px|thumb|right|Rear view of the TV PCB board, showing the circuit layout.]]<br> | ||
| − | The part number for the 5x7 color LED blocks is <b>TBC12-22EGWA</b> made by Kingbright America LLC. | + | The part number for the 5x7 color LED blocks is <b>TBC12-22EGWA</b> made by Kingbright America LLC.<br> |
| + | Unfortunately, the schematics for this board are not contained in the game manual. The manual suggests calling Stern for a copy of the schematics. | ||
[[File:TSPPTVBrokenTrace.jpg|200px|thumb|left|A fractured trace under "Block 1" and a view of the surface mount 68 ohm resistors.]]<br> | [[File:TSPPTVBrokenTrace.jpg|200px|thumb|left|A fractured trace under "Block 1" and a view of the surface mount 68 ohm resistors.]]<br> | ||
Latest revision as of 21:34, 9 December 2022
The Simpsons Pinball Party (specific page)
Buried in the wire harness to the left of the I/O Driver board you'll find a 10,000uf/16V capacitor that appears to be a "hack". This is, in fact, a factory installed capacitor.
The Playfield TV Display
The part number for the 5x7 color LED blocks is TBC12-22EGWA made by Kingbright America LLC.
Unfortunately, the schematics for this board are not contained in the game manual. The manual suggests calling Stern for a copy of the schematics.
