Difference between revisions of "Talk:Gottlieb System 80"
| Line 8: | Line 8: | ||
If you mean in the Gottlieb PS section, have at it | If you mean in the Gottlieb PS section, have at it | ||
— Chris Hibler | — Chris Hibler | ||
| + | |||
| + | Some pages already have sections for aftermarket boards or notes on particular issues with aftermarket boards. I don't see a problem with documenting this stuff, considering that aftermarket boards are fairly common, but often times mystery boxes without much documentation available. Maybe create a new section under technical information after all the original boards with a subheading of "aftermarket boards" [[User:ForceFlow|ForceFlow]] ([[User talk:ForceFlow|talk]]) 03:11, 8 August 2023 (CDT) | ||
Revision as of 02:11, 8 August 2023
Adding ® on every Gottlieb is not necessary. Unless, of course, we are snarkily mocking their overly-diligent protection of their trademarks. --ts4z (talk) 08:56, 3 February 2014 (CST)
Adding the mark has to be done per the agreement between Pinwiki.com and Gottlieb Development LLC. --Jimpal (talk) 11:21, 3 February 2014 (CST)
I was thinking of adding a subsection to Gottlieb System 80 power supplies for 3rd party replacement boards. I have a schematic diagram to contribute for the Rottendog GPS081 - this seems like a good place for it to reside. Please advise.
If you mean in the Gottlieb PS section, have at it — Chris Hibler
Some pages already have sections for aftermarket boards or notes on particular issues with aftermarket boards. I don't see a problem with documenting this stuff, considering that aftermarket boards are fairly common, but often times mystery boxes without much documentation available. Maybe create a new section under technical information after all the original boards with a subheading of "aftermarket boards" ForceFlow (talk) 03:11, 8 August 2023 (CDT)