Difference between revisions of "Pinball Part Datasheets"
Jump to navigation
Jump to search
| Line 46: | Line 46: | ||
Integrated circuits (ICs) in older SS machines are usually Dual-Inline (DIP) packages. Part numbers for ICs may have prefixes and suffixes that specify details about the part. For example, SN74LS244N is a 74LS244 device. SN indicates the manufacturer (Texas Instruments) and N indicates a 20-pin DIP package. The package type suffix may vary by manufacturer. Some parts may have additional suffixes that indicate the temperature range of the part. | Integrated circuits (ICs) in older SS machines are usually Dual-Inline (DIP) packages. Part numbers for ICs may have prefixes and suffixes that specify details about the part. For example, SN74LS244N is a 74LS244 device. SN indicates the manufacturer (Texas Instruments) and N indicates a 20-pin DIP package. The package type suffix may vary by manufacturer. Some parts may have additional suffixes that indicate the temperature range of the part. | ||
| − | For information on TTL part numbering see [http://en.wikipedia.org/wiki/7400_series | + | For information on TTL part numbering see [http://en.wikipedia.org/wiki/7400_series 7400 Series Wikipedia article] section on "Part Numbering Schemes". |
Revision as of 09:43, 16 May 2011
1 Optoelectronics
| Part Number | Type | Package | Datasheet Link | Typical Uses |
|---|---|---|---|---|
| QED123 | IR emitter | T1-3/4 | http://www12.fairchildsemi.com/ds/QE/QED123.pdf | WPC, maybe others |
| QSD724 | IR Receiver | T1-3/4 | http://datasheet.octopart.com/QSD724-Fairchild-datasheet-8132.pdf | WPC original |
| QSD124 | IR Receiver | T1-3/4 | http://www.fairchildsemi.com/ds/QS/QSD124.pdf | WPC substitute, maybe others |
2 Transistors
| Part Number | Type | Volts | Amps | Package | Datasheet Link | Typical Uses |
|---|---|---|---|---|---|---|
| TIP102 | NPN | 100V | 8A | TO-220 | http://www.fairchildsemi.com/ds/TI/TIP100.pdf | Solenoids, flashers and lamp matrix low side |
| TIP107 | NPN | 100V | 8A | TO-220 | http://www12.fairchildsemi.com/ds/TI/TIP105.pdf | Lamp matrix high side |
| TIP36C | PNP | 100V | 25A | TO-247 | http://www.st.com/stonline/books/pdf/docs/5071.pdf | Flippers; high power solenoid |
| IRL540 | N FET | 100V | 28A | TO-220 | http://www.st.com/stonline/books/pdf/docs/5071.pdf | Stern (replacement) flashers, solenoids, lamp matrix low side |
| 22NE10L | N FET | 100V | 22A | TO-220 | http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00001959.pdf | Stern flashers, solenoids, lamp matrix low side |
| New entry || Type || xxV || xxA || TO- || Put link here || Purpose |}
3 Integrated Circuits
Integrated circuits (ICs) in older SS machines are usually Dual-Inline (DIP) packages. Part numbers for ICs may have prefixes and suffixes that specify details about the part. For example, SN74LS244N is a 74LS244 device. SN indicates the manufacturer (Texas Instruments) and N indicates a 20-pin DIP package. The package type suffix may vary by manufacturer. Some parts may have additional suffixes that indicate the temperature range of the part.
For information on TTL part numbering see 7400 Series Wikipedia article section on "Part Numbering Schemes".