Difference between revisions of "Bram Stoker's Dracula"
| Line 9: | Line 9: | ||
| − | Rule Sheet...see Dracula listing in IPDB [http://www.ipdb.org/machine.cgi?id=3072 here] | + | Rule Sheet...see Dracula listing in IPDB [http://www.ipdb.org/machine.cgi?id=3072 here]<br> |
[[Bram Stoker's Dracula Shop Guide]] | [[Bram Stoker's Dracula Shop Guide]] | ||
| − | |||
== WPC Specific Issues == | == WPC Specific Issues == | ||
Revision as of 13:22, 4 September 2011
 |
| Manufacturer | System | Year | Model | Produced |
|---|---|---|---|---|
| Williams | WPC-Fliptronics | 1993 | 50001 | 6,801 |
Rule Sheet...see Dracula listing in IPDB here
Bram Stoker's Dracula Shop Guide
1 WPC Specific Issues
2 Game-Specific Issues
Castle Lock releases more than one ball at a time
If your Castle Lock "disappearing post" mechanism is worn, allowing some play in the steel rod that holds the balls in the lock mechanism, more than one ball may be released at a time. Balls may also "skip over" the lock mechanism. The solution is to either purchase a new bracket, or insert a "nyliner" into the "hogged out" top hole of the bracket.
Balls "skip over" lock mechanism (aka disappearing post)
Improper adjustment of the wireform height may also cause balls to skip over the lock mechanism. You can lower the wireform height by shortening the plastic post that supports it. You'll have to remove the screws from the right ramp over the right sling, and perhaps the decorative "castle".
Return to Williams WPC page.