Difference between revisions of "Orbitor 1"
Jump to navigation
Jump to search
Line 1: | Line 1: | ||
− | + | Orbitor 1 is that [[Bally Pinball | Stern Electronics]] game that had the wacky playfield that curved all over the place with a piece of plastic on top that was shaped like craters. | |
− | U1 - | + | ==Rotor Sensor Board== |
− | OP1 - | + | Here is a parts list of what is on the Rotor Sensor board for Orbitor 1. |
− | R1,R5 | + | |
− | R2 | + | {| class="wikitable sortable" |
− | R3,R6 | + | !Part |
− | R4 | + | !class="unsortable" | Part Number |
− | R7 | + | |- |
− | R8 | + | |U1 || LM2917N |
− | CR1,CR2 - | + | |- |
− | Q1 - | + | |OP1 || OPB815 |
− | C1 | + | |- |
− | C2 | + | |R1,R5 || 20k 1/2 watt |
− | C3 | + | |- |
− | C4 | + | |R2 || 10M 1/2 watt |
− | C5 | + | |- |
− | C6 | + | |R3,R6 || 100k 1/2 watt |
− | C7 | + | |- |
+ | |R4 || 10k 1/2 watt | ||
+ | |- | ||
+ | |R7 || 680 1/2 watt | ||
+ | |- | ||
+ | |R8 || 470 1/2 watt | ||
+ | |- | ||
+ | |CR1,CR2 || 1n4148 | ||
+ | |- | ||
+ | |Q1 || 2n4403 | ||
+ | |- | ||
+ | |C1 || .002 mfd 10% | ||
+ | |- | ||
+ | |C2 || .05 mfd 10% | ||
+ | |- | ||
+ | |C3 || .001 mfd | ||
+ | |- | ||
+ | |C4 || .1 mfd | ||
+ | |- | ||
+ | |C5 || 1.0 mfd 10% tantalum | ||
+ | |- | ||
+ | |C6 || .05 mfd 25v | ||
+ | |- | ||
+ | |C7 || 100 mfd 16v electrolytic | ||
+ | |- | ||
+ | |} |
Revision as of 06:20, 1 July 2012
Orbitor 1 is that Stern Electronics game that had the wacky playfield that curved all over the place with a piece of plastic on top that was shaped like craters.
Rotor Sensor Board
Here is a parts list of what is on the Rotor Sensor board for Orbitor 1.
Part | Part Number |
---|---|
U1 | LM2917N |
OP1 | OPB815 |
R1,R5 | 20k 1/2 watt |
R2 | 10M 1/2 watt |
R3,R6 | 100k 1/2 watt |
R4 | 10k 1/2 watt |
R7 | 680 1/2 watt |
R8 | 470 1/2 watt |
CR1,CR2 | 1n4148 |
Q1 | 2n4403 |
C1 | .002 mfd 10% |
C2 | .05 mfd 10% |
C3 | .001 mfd |
C4 | .1 mfd |
C5 | 1.0 mfd 10% tantalum |
C6 | .05 mfd 25v |
C7 | 100 mfd 16v electrolytic |