Difference between revisions of "Earthshaker"
Jump to navigation
Jump to search
(→Shaker Motor Brush Replacement: rough page someone format please) |
|||
Line 29: | Line 29: | ||
[[File:es-brush-rep-cover.jpg|200px|thumb|left|Shaker motor cover]] | [[File:es-brush-rep-cover.jpg|200px|thumb|left|Shaker motor cover]] | ||
− | [[File:es-brush- | + | [[File:es-brush-coverremoved.jpg|200px|thumb|left|Shaker motor cover removed]] |
[[File:es-brush-overview.jpg|200px|thumb|left|Brush overview]] | [[File:es-brush-overview.jpg|200px|thumb|left|Brush overview]] | ||
[[File:es-brush-new-20-9604.jpg|200px|thumb|left|New Brush Kit]] | [[File:es-brush-new-20-9604.jpg|200px|thumb|left|New Brush Kit]] | ||
+ | [[File:es-brush-worn-vs-new.jpg|200px|thumb|left|Worn brush top, new brush bottom]] | ||
[[File:es-brush-removal.jpg|200px|thumb|left|Flat blade screwdriver to pry brush]] | [[File:es-brush-removal.jpg|200px|thumb|left|Flat blade screwdriver to pry brush]] | ||
− | |||
[http://pinwiki.com/wiki/index.php?title=Williams_System_9_-_11 Return to Williams System 9 and 11 main page.] | [http://pinwiki.com/wiki/index.php?title=Williams_System_9_-_11 Return to Williams System 9 and 11 main page.] |
Revision as of 08:13, 15 September 2012
Note: This page is a work in progress. Please help get it to a completed state by adding any useful information to it. |
1 Game Information
Manufacturer | System | Year | Model | Produced |
---|---|---|---|---|
Williams | System 11B | 1989 | 568 | xxxxxx |
IPDB Link (including software and schematics)
Earthshaker Playing Tips and Rule Sheet
2 System 11 Specific Issues
3 Game-Specific Issues
3.1 Earthshaker Fault Mechanism
A nifty - and long-unavailable - cam is subject to wear. The important parts are all at the back of the playfield, and impossible to access easily without pulling the playfield.
3.2 Shaker Motor Brush Replacement
If your motor has completely stopped working or seems like it doesn't shake like it used to, chances are good that the motor brushes are worn out. The motor brushes are available from supplies under part #20-9604 and are about $30. The brushes can be removed without removing the motor from its frame; they snap into place. The pictures below show the relevant parts.