Difference between revisions of "Gottlieb System 80"
Jump to navigation
Jump to search
(Created page with "{{WIP}} ==Introduction== Put system info here ==Games== Put list of games that used this system here (including anything that might not have been pinball) ==Technical Info== Thi...") |
|||
| Line 12: | Line 12: | ||
===Power Driver Issues=== | ===Power Driver Issues=== | ||
This may not apply to some, as MPU might have been part of it. | This may not apply to some, as MPU might have been part of it. | ||
| − | ===MPU Issues== | + | ===MPU Issues=== |
| − | ==Power Supply Issues=== | + | ===Power Supply Issues=== |
===Display Driver Board=== | ===Display Driver Board=== | ||
Revision as of 08:52, 22 April 2011
 |
1 Introduction
Put system info here
2 Games
Put list of games that used this system here (including anything that might not have been pinball)
3 Technical Info
Things like Data East's controller board was a copy of William's System 11 with some changes would go here.
4 Problems and Fixes
4.1 Power Driver Issues
This may not apply to some, as MPU might have been part of it.
4.2 MPU Issues
4.3 Power Supply Issues
4.4 Display Driver Board
Possibly doesn't apply to some, can't think of an example.
5 Game Specific Problems and Fixes
Example would be servo controller on Independence Day pinball
6 Repair Logs
Did you do a repair? Log it here as a possible solution for others.