Difference between revisions of "Stern S.A.M. System Repair"
Jump to navigation
Jump to search
| Line 18: | Line 18: | ||
===Display Driver Board=== | ===Display Driver Board=== | ||
Possibly doesn't apply to some, can't think of an example. | Possibly doesn't apply to some, can't think of an example. | ||
| + | |||
| + | ==References== | ||
| + | SAM system schematics are available on the Stern Pinball website here: http://www.sternpinball.com/schematics.shtml | ||
==Game Specific Problems and Fixes== | ==Game Specific Problems and Fixes== | ||
Revision as of 09:44, 22 April 2011
 |
1 Introduction
Put system info here
2 Games
Put list of games that used this system here (including anything that might not have been pinball)
3 Technical Info
Things like Data East's controller board was a copy of William's System 11 with some changes would go here.
4 Problems and Fixes
4.1 Power Driver Issues
This may not apply to some, as MPU might have been part of it.
4.2 MPU Issues
4.3 Power Supply Issues
4.4 Display Driver Board
Possibly doesn't apply to some, can't think of an example.
5 References
SAM system schematics are available on the Stern Pinball website here: http://www.sternpinball.com/schematics.shtml
6 Game Specific Problems and Fixes
Example would be servo controller on Independence Day pinball
7 Repair Logs
Did you do a repair? Log it here as a possible solution for others.