ALI/Fascination Repair

Note: This page is a work in progress. Please help get it to a completed state by adding any useful information to it.

For history of Allied Leisure see Allied Leisure.

1 Introduction

Allied Leisure (ALI) is best known for making machines with "short" playfields; the two "shaker ball" EM machines, and several "cocktail" pinball machines in the late 1970s, which they produced under the names "Allied Leisure Industries" and "Fascination International" with identical hardware (Gameplan was also making cocktail pinball machines in the late 1970s with completely different hardware based on Bally's designs). They also produced several "traditional form factor" solid-state pinball machines in the mid-1970s.

2 Games

2.1 Electromechanical

• Seahunt
• Spooksville

2.2 Solid State

• Rock On
• Dyn O' Mite (also written as Dyno-Mite)
• T.N.T.
• Thunderbolt
• Boogie
• Roy Clark Super Picker
• Getaway
• Hoe Down

2.3 Cocktail

• Take Five
• Flame of Athens
• Hearts Spades
• Disco '79
• Star Shooter
• Circa 1933 (Fascination Int.)
• Eros II (Fascination Int.)
• Eros One (Fascination Int.)
• Roy Clark The Entertainer (Fascination Int.)

3 Technical Info

3.1 Board Set

3.1.1 Generation 1

The system with multiple circuit boards has been designated as "generation 1". It was used in Rock On, Dyn 'O Mite, T.N.T., Thunderbolt, and Boogie. All the games used the same cabinet, the same playfield layout (not all had the same artwork), and the same wiring (other than the difference between the number of displays for 2-player and 4-player games). Sounds were provided by a set of chimes.

3.1.1.1 Pinball Lamp Drivers (264-1-53)

There are two lamp boards. One of these boards is located in the backbox, and another in the cabinet.

3.1.1.2 Pinball Mode Interface / Mode Sequencer Interface (264-1-54)

This board is located in the backbox.

3.1.1.3 Pinball Player Up Logic (264-1-62)

This board is located in the backbox.

3.1.1.4 Bonus Drain / Bonus Board (264-1-59)

This board is located in the backbox.

3.1.1.5 Pinball Credit Circuit / Credit Board (264-1-56)

This board is located in the backbox.

3.1.1.6 Standard Digital Scoring Unit (264-1-62)

These boards are located in the backbox.

3.1.1.7 Score Display Logic (264-1-60)

Either 2 or 4 of these boards are located in the backbox.

3.1.1.8 Score Display (5-digit) (264-1-75)

The score displays are inserted into the Score Display Logic boards (264-1-60).

3.1.1.9 Line 'Em Up Logic (264-1-57)

This board is located in the backbox.

3.1.1.10 Line 'Em Up Display (264-1-64)

The Line 'Em Up Display is inserted into the Line 'Em Up Logic board (264-1-57).

3.1.1.11 Credit Display (264-1-55)

This board is located in the backbox.

3.1.1.12 Pinball Playfield Scoring Logic (264-1-45)

This board is located in the cabinet.

3.1.1.13 Relay Drivers (264-1-52)

This board is located in the cabinet.

3.1.1.14 Chime Solenoid Circuit (264-1-189)

Part name & number found within a technican's notes printed. Unclear which game(s) it appears in. Note: Not present in Rock On, Dyn 'O Mite, or T.N.T. Possibly present in Thunderbolt, but this is unconfirmed.

3.2 Switches

3.2.1 Switch Matrix

All solid-state ALI / Fascination games use the exact same MPU board and software; game "rules" are changed simply by rearranging the placement of switches, targets, lamps, pop bumpers, and other elements on the playfield.

#	J1	J1 reverse	J2	J2 reverse	J3	J3 reverse	#	#	J4	J5	J6	#	credit disp	player disp	#
1	unused	unused	7k bonus lamp	8k bonus lamp	p2 disp LED 2	p2 disp LED 5	A	1	Q66	drop target C coil	100 pt chime	1	data	data	1
2	unused	unused	4k bonus lamp	6k bonus lamp	p2 disp LED 3	p2 disp LED 4	B	2	right gate coil	C bumper coil	10 pt chime	2	blank	blank	2
3	unused	special w/lit switch	1k bonus lamp	2k bonus lamp	shoot again lamp	unused	C	3	Q62	L slingshot coil	play counter	3	+6v dc	+6v dc	3
4	10 pt rail switch	ball in play switch	unused	3k bonus lamp	unused	unused	D	4	flipper power relay	drop target B coil	unused	4	ground	ground	4
5	outhole switch	R bumper switch	9k bonus lamp	5k bonus lamp	unused	unused	E	5	unused	unused	unused	5	clock	clock	5
6	L bumper switch	R collect val switch	p1 disp LED 1	score display E	unused	unused	F	6	unused	drop target D coil	replay counter	6	+5v dc	+5v dc	6
7	L collect val switch	R slingshot switch	score display H	p1 disp LED 3	unused	unused	H	7	40v return	R bumper coil	unused	7		LED 5	7
8	C bumper switch	L slingshot switch	L 1k pt lamp	unused	unused	unused	J	8	40v return	unused	unused	8		LED 3	8
9	drop target C switch	drop target D switch	L 2k pt lamp	unused	unused	unused	K	9	40v return	drop target A coil	unused	9		LED 1	9
10	unused		L 3k pt lamp	unused	unused	unused	L	10	+5v dc	unused	Q30	10		LED 4	10
11	roll tilt switch	credit button	unused	L 4k pt lamp	unused	unused	M	11	+5v dc	unused	unused	11		LED 2	11
12	raise drop A switch	raise drop D switch	2X bonus lamp	10k bonus lamp	unused	unused	N	12	+5v dc	outhole coil	unused	12
13		close gate switch	R 1k pt lamp	3X bonus lamp	unused	unused	P	13	5v return	R slingshot coil	1000 pt chime	13
14	500 pt rollover switch	raise drop B switch	R 2k pt lamp	R 4k pt lamp	unused	unused	R	14	5v return	unused	knocker coil	14
15	raise drop C switch	E.B. w/lit switch	special lamp	R 3k pt lamp	unused	unused	S	15	5v return	L bumper coil	GI relay?	15
16	slam tilt switch	2P jumper	unused	unused	unused	unused	T	16
17		test button	p2 disp LED 1	extra ball lamp	unused	unused	U	17
18			unused	unused	unused	unused	V	18
19	2P jumper		unused	credit/start button	unused	unused	W	19
20		score display 24	coin 3	coin 3	unused	unused	X	20
21	credit disp clock	score display 2	coin 2	coin 2	unused	unused	Y	21
22	p2 disp clock	p1 disp clock	coin 1	coin 1	drop target B switch	drop target B switch	Z	22
23	score display 3	score display 23	+5v dc out	+5v dc out	+5v dc out	+5v dc out	a	23
24		p2 disp blank	unused	slam tilt switch 2	drop target A switch	drop target A switch	b	24
25	p1 disp blank	all disp data	cabinet switch ret	cabinet switch ret	pf switch ret	pf switch ret	c	25

5 Parts Substitutions & Replacements

5.3 Cabinet

5.3.1 Playfield Rails

The playfield rails inside the cabinet appear to be nearly identical to the playfield rails found in Gottlieb System 1 games. However, the Allied Leisure rails are painted flat black, rather than left bare.

5.3.2 Legs

Generation 1 Allied Leisure legs are 29.5", painted gray, and have a 5-1/4" rib (instead of a rib going down the whole length of the leg). The leg is pinched slightly around the length of the rib. The original part number was 264-3-42. A Gottlieb 28.5" dark gray non-ribbed leg might be a close possible substitution (Part LEG-28GR from PBResource).