Difference between revisions of "User talk:Jimpal"
| Line 6: | Line 6: | ||
== MPU-200 section == | == MPU-200 section == | ||
Thanks. I just started in on it too. I'm done after this edit. | Thanks. I just started in on it too. I'm done after this edit. | ||
| + | |||
| + | |||
| + | From Hibler: The "new" table should be ordered in the way that people will use it. That is, U8, pin 1, 2, 3, etc...U13 pin 1, 2, 3, etc. | ||
| + | Ordering it by signal name isn't as useful when buzzing connections. | ||
Revision as of 18:51, 16 March 2016
dr. Dude was one of the last 11C. Wonder why they still used switches on this one. When I open my Rollergames next time I will check if it's the same with this one.
I can't recall seeing double switches on the pops, but I know that I had to change out a zener on one of the spec. sol. trigger lines. I can't comment about the slings, as I did not have work on them. This was on a call back in Nov., so things are a tad hazy, but I do remember the shorted zener. Not certain until more data is collected, but it seems like there may be some inconsistencies here. One game did this, while the other did this. That wouldn't be a first for WMS though. - Jim
MPU-200 section
Thanks. I just started in on it too. I'm done after this edit.
From Hibler: The "new" table should be ordered in the way that people will use it. That is, U8, pin 1, 2, 3, etc...U13 pin 1, 2, 3, etc.
Ordering it by signal name isn't as useful when buzzing connections.