Difference between revisions of "The Simpsons Pinball Party"
Jump to navigation
Jump to search
(Started section on TSPP TV PCB) |
|||
| Line 4: | Line 4: | ||
Buried in the wire harness to the left of the I/O Driver board you'll find a 10,000uf/16V capacitor that appears to be a "hack". This is, in fact, a factory installed capacitor. | Buried in the wire harness to the left of the I/O Driver board you'll find a 10,000uf/16V capacitor that appears to be a "hack". This is, in fact, a factory installed capacitor. | ||
<br clear=all> | <br clear=all> | ||
| + | |||
| + | '''<u>The Playfield TV Display</u>''' | ||
| + | |||
| + | [[File:TSPPTVRear.jpg|200px|thumb|left|Front view of the TV PCB board.]]<br> | ||
| + | [[File:TSPPTVFront.jpg|200px|thumb|left|Rear view of the TV PCB board, showing the circuit layout.]]<br> | ||
| + | [[File:TSPPTVBrokenTrace.jpg|200px|thumb|left|A fractured trace under "Block 1" and a view of the surface mount 68 ohm resistors.]]<br> | ||
Revision as of 21:40, 27 November 2016
The Simpsons Pinball Party (specific page)
Buried in the wire harness to the left of the I/O Driver board you'll find a 10,000uf/16V capacitor that appears to be a "hack". This is, in fact, a factory installed capacitor.
The Playfield TV Display
