Difference between revisions of "Pinball Part Datasheets"
Jump to navigation
Jump to search
(→UVEPROMs: Created subsection...Added first item, 2716) |
|||
| Line 10: | Line 10: | ||
| QED123 || IR emitter || T1-3/4 || http://www12.fairchildsemi.com/ds/QE/QED123.pdf || WPC, maybe others | | QED123 || IR emitter || T1-3/4 || http://www12.fairchildsemi.com/ds/QE/QED123.pdf || WPC, maybe others | ||
|- | |- | ||
| − | | QSD724 || IR Receiver|| T1-3/4 ||http://datasheet.octopart.com/QSD724-Fairchild-datasheet-8132.pdf || WPC original | + | | QSD724 || IR Receiver || T1-3/4 || http://datasheet.octopart.com/QSD724-Fairchild-datasheet-8132.pdf || WPC original |
|- | |- | ||
| − | | QSD124 || IR Receiver|| T1-3/4 ||http://www.fairchildsemi.com/ds/QS/QSD124.pdf || WPC substitute, maybe others | + | | QSD124 || IR Receiver || T1-3/4 || http://www.fairchildsemi.com/ds/QS/QSD124.pdf || WPC substitute, maybe others |
|- | |- | ||
Revision as of 11:09, 28 May 2011
1 Optoelectronics
| Part Number | Type | Package | Datasheet Link | Typical Uses |
|---|---|---|---|---|
| QED123 | IR emitter | T1-3/4 | http://www12.fairchildsemi.com/ds/QE/QED123.pdf | WPC, maybe others |
| QSD724 | IR Receiver | T1-3/4 | http://datasheet.octopart.com/QSD724-Fairchild-datasheet-8132.pdf | WPC original |
| QSD124 | IR Receiver | T1-3/4 | http://www.fairchildsemi.com/ds/QS/QSD124.pdf | WPC substitute, maybe others |
2 UVEPROMs
| Part Number | Description | Package | Datasheet Link |
|---|---|---|---|
| 2716 | http://www.datasheetarchive.com/pdf-datasheets/Datasheets-14/DSA-276496.html |
3 Transistors
| Part Number | Type | Volts | Amps | Package | Datasheet Link | Typical Uses |
|---|---|---|---|---|---|---|
| TIP102 | NPN | 100V | 8A | TO-220 | http://www.fairchildsemi.com/ds/TI/TIP100.pdf | Solenoids, flashers and lamp matrix low side. Use in place of TIP 120 (a TIP102 more robust). |
| TIP107 | NPN | 100V | 8A | TO-220 | http://www12.fairchildsemi.com/ds/TI/TIP105.pdf | Lamp matrix high side |
| TIP36C | PNP | 100V | 25A | TO-247 | http://www.st.com/stonline/books/pdf/docs/5071.pdf | Flippers; high power solenoid |
| MPSA13 | NPN | 30V | 1.2A | TO-92 | http://www.fairchildsemi.com/ds/MP/MPSA13.pdf | Gottlieb Sys80 Driver Board |
| IRL540 | N FET | 100V | 28A | TO-220 | http://www.st.com/stonline/books/pdf/docs/5071.pdf | Stern (replacement) flashers, solenoids, lamp matrix low side |
| 22NE10L | N FET | 100V | 22A | TO-220 | http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00001959.pdf | Stern flashers, solenoids, lamp matrix low side |
| New entry || Type || xxV || xxA || TO- || Put link here || Purpose |}
4 Integrated Circuits
Integrated circuits (ICs) in older SS machines are usually Dual-Inline (DIP) packages. Part numbers for ICs may have prefixes and suffixes that specify details about the part. For example, SN74LS244N is a 74LS244 device. SN indicates the manufacturer (Texas Instruments) and N indicates a 20-pin DIP package. The package type suffix may vary by manufacturer. Some parts may have additional suffixes that indicate the temperature range of the part.
For information on TTL part numbering see 7400 Series Wikipedia article section on "Part Numbering Schemes".