Difference between revisions of "Xenon"
Jump to navigation
Jump to search
| Line 22: | Line 22: | ||
'''PROBLEM: Center pop bumber fires randomly during gameplay and test mode but NOT during attract mode''' | '''PROBLEM: Center pop bumber fires randomly during gameplay and test mode but NOT during attract mode''' | ||
:SOLUTION: Issue was resolved by replacing the ceramic disk .047 mfd 50 capacitor located on the leaf switch of the pop bumper. | :SOLUTION: Issue was resolved by replacing the ceramic disk .047 mfd 50 capacitor located on the leaf switch of the pop bumper. | ||
| + | |||
| + | |||
| + | '''PROBLEM: Left Flipper is very weak''' | ||
| + | :SOLUTION: Issue was resolved by replacing the flipper coil with the correct coil for starters. #AQ-25-500_34-45, Then adjusting and cleaning the End Of Stroke(EOS) leaf switch resolved the issue totally. | ||
Revision as of 09:09, 27 April 2011
 |
1 Introduction
2 Technical Info
2.1 System Overview
3 Paperwork
Manuals, schematics, coin cards...
4 Rubber Rings
Rubber Ring Sizes goes here
5 Photos
Teardown photos go here
6 References
7 Repair Logs
Did you do a repair? Log it here as a possible solution for others.
PROBLEM: Center pop bumber fires randomly during gameplay and test mode but NOT during attract mode
- SOLUTION: Issue was resolved by replacing the ceramic disk .047 mfd 50 capacitor located on the leaf switch of the pop bumper.
PROBLEM: Left Flipper is very weak
- SOLUTION: Issue was resolved by replacing the flipper coil with the correct coil for starters. #AQ-25-500_34-45, Then adjusting and cleaning the End Of Stroke(EOS) leaf switch resolved the issue totally.