Difference between revisions of "Mattel"
Ken Layton (talk | contribs) |
m (→Games) |
||
| Line 7: | Line 7: | ||
*Las Vegas, 1977, 4 players | *Las Vegas, 1977, 4 players | ||
| − | [[File:Las_Vegas_pf_better.jpg|200px|thumb|left|Playfield of Las Vegas]] | + | [[File:Las_Vegas_pf_better.jpg|200px|thumb|left|Playfield of Las Vegas]] |
| − | [[File:Las_Vegas_pf_nice_cu.JPG|200px|thumb| | + | [[File:Las_Vegas_pf_nice_cu.JPG|200px|thumb|left|closer look at playfield]] |
| − | [[File:Las_Vegas_bg_nice.jpg|200px|thumb| | + | [[File:Las_Vegas_bg_nice.jpg|200px|thumb|left|Las Vegas backglass]] |
<br clear=all> | <br clear=all> | ||
Revision as of 06:19, 13 July 2012
 |
1 Introduction
Mattel Electronics manufactured one model of electronic home model pinball machine. Mattel no longer has any manuals, information, or parts for this machine.
2 Games
- Las Vegas, 1977, 4 players
3 Technical Info
Mattel issued two manuals for "Las Vegas" pinball, an owner's manual and a service/parts manual.
Owner's Manual is available to download here: http://mattelhomepin.blogspot.com/p/users-manual.html
Las Vegas pinball machine is covered by the now expired patents number 4162793 (game computer board) and 4203602 (metal ball used as a switch between two "hot" contacts).
4 Problems and Solutions
4.1 Power Problems
4.2 Solenoid Problems
4.3 Lamp Problems
4.4 Switch Problems
The original "ball and chain" tilt assembly is very flimsy and not very good. It is suggested to replace it with a Williams # A-15361 Tilt Assembly for much better operation since it uses standardized parts.
You can also use these Marco Specialties parts along with two 6-32 wing nuts to make a complete tilt assembly:
(1) # 04-10346 and (1) # 20-6502-A
The standup switches look like bent up paper clips just like the switches on Sentinel/Wonder Wizard home pinball machines. These switches must be kept clean and shiny to work properly. The circled area is the switch.