Stern S.A.M. System Repair


Note: This page is a work in progress. Please help get it to a completed state by adding any useful information to it.

1 Introduction

S.A.M. is the current board system used by Stern Pinball. The first full production game to use the S.A.M. Board Set was World Poker Tour in 2006.

Things like Data East's controller board was a copy of William's System 11 with some changes would go here.

This may not apply to some, as MPU might have been part of it.

Possibly doesn't apply to some, can't think of an example.

SAM system schematics are available on the Stern Pinball website here: http://www.sternpinball.com/schematics.shtml

Example would be servo controller on Independence Day pinball

Did you do a repair? Log it here as a possible solution for others.