Orbitor 1
Revision as of 06:20, 1 July 2012 by Pinball Wizard (talk | contribs)
Orbitor 1 is that Stern Electronics game that had the wacky playfield that curved all over the place with a piece of plastic on top that was shaped like craters.
Rotor Sensor Board
Here is a parts list of what is on the Rotor Sensor board for Orbitor 1.
| Part | Part Number |
|---|---|
| U1 | LM2917N |
| OP1 | OPB815 |
| R1,R5 | 20k 1/2 watt |
| R2 | 10M 1/2 watt |
| R3,R6 | 100k 1/2 watt |
| R4 | 10k 1/2 watt |
| R7 | 680 1/2 watt |
| R8 | 470 1/2 watt |
| CR1,CR2 | 1n4148 |
| Q1 | 2n4403 |
| C1 | .002 mfd 10% |
| C2 | .05 mfd 10% |
| C3 | .001 mfd |
| C4 | .1 mfd |
| C5 | 1.0 mfd 10% tantalum |
| C6 | .05 mfd 25v |
| C7 | 100 mfd 16v electrolytic |