Sega/Stern White Star Repair

Note: This page is a work in progress. Please help get it to a completed state by adding any useful information to it.

1 Introduction

Put system info here

2 Games

2.1 Sega

• Apollo 13
• Goldeneye
• Twister
• Independence Day
• Space Jam
• Star Wars Trilogy
• The Lost World Jurassic Park
• The X Files
• Starship Troopers
• Viper Night Driving
• Lost in Space
• Godzilla
• Harley-Davidson
• South Park

2.2 Stern

• Striker Xtreme
• Sharkey's Shootout
• High Roller Casino
• Austin Powers
• Monopoly
• NFL
• Playboy
• Roller Coaster Tycoon
• The Simpsons Pinball Party
• Terminator 3: Rise Of The Machines
• The Lord Of The Rings
• Ripley's Believe It Or Not
• Elvis
• Grand Prix
• The Sopranos
• NASCAR

3 Technical Info

Things like Data East's controller board was a copy of William's System 11 with some changes would go here.

4 Problems and Fixes

4.1 Power Driver Issues

This may not apply to some, as MPU might have been part of it.

4.4 Display Driver Board

Possibly doesn't apply to some, can't think of an example.

5 Game Specific Problems and Fixes

Example would be servo controller on Independence Day pinball

Lord Of The Rings -

Balrog. If your Balrog stops registering hits. A little checking will sort it out. It is a micro mini switch with a roller on it. May need adjusting. Known problems past that are flaky or bad switch. And wiring. The Balrog moves so wires can break inside where you can't see them. Easy to check the switch and wires with a meter. And the wires push into an IDC connector nearby, be sure they are pushed in tight. LTG :)

6 Repair Logs

Did you do a repair? Log it here as a possible solution for others.