EM Repair

From PinWiki
Jump to navigation Jump to search
ExclamationPoint.jpg
Note: This page is a work in progress. Please help get it to a completed state by adding any useful information to it.


1 Introduction

Put system info here

2 Safety

3 Games

The "Big Three" manufacturers were Gottlieb, Williams and Bally. The "best of the rest" would probably include: Chicago Coin and Midway as well as some foreign brands such as Recel, Playmatic and Rally. There were many companies that only produced a few games, especially early on.

A quick search of the Internet Pinball Database:

http://www.ipdb.org/search.pl?gtype=EM&searchtype=advanced

Shows that between all the manufacturers, there are over 3403 games within this very broad category.


--Newmantjn 18:33, 22 April 2011 (BST)

4 Technical Info

4.1 Start-up Sequences

4.2 Schematics

5 Problems and Fixes

5.1 Coils

5.2 Relays

5.3 Stepper Units

5.4 Score Reels

5.5 Drop Targets

5.6 Roto Targets

5.7 Pop Bumpers

5.8 Kickers/Slingshots

5.9 Flippers

5.10 Power Supply Issues

6 Test Procedures

6.1 Testing with a Jumper Wire

6.2 Testing with a Test Light

7 Game Specific Problems and Fixes

Example would be servo controller on Independence Day pinball

8 Repair Logs

Did you do a repair? Log it here as a possible solution for others.