Pinball Part Datasheets

From PinWiki
Revision as of 13:36, 6 August 2011 by Jimpal (talk | contribs) (→‎Integrated Circuits: Cannot figure out for the life of me what's wrong with table format on last 3 components)
Jump to navigation Jump to search

1 Optoelectronics

Part Number Type Package Datasheet Link Typical Uses
QED123 IR emitter T1-3/4 http://www12.fairchildsemi.com/ds/QE/QED123.pdf WPC, GTB Sys3
QSD724 IR Receiver T1-3/4 http://datasheet.octopart.com/QSD724-Fairchild-datasheet-8132.pdf WPC original
QSD124 IR Receiver T1-3/4 http://www.fairchildsemi.com/ds/QS/QSD124.pdf WPC substitute, GTB Sys3

2 UVEPROMs

Part Number Description Package Datasheet Link
2716
2Kx8
DIP-24
http://www.datasheetarchive.com/pdf-datasheets/Datasheets-14/DSA-276496.html
2532
4Kx8
DIP-24
http://pdf1.alldatasheet.com/datasheet-pdf/view/103331/TI/TMS2532.html

3 Transistors

Part Number Type Volts Amps Package Datasheet Link Typical Uses
TIP-102 NPN 100V 8A TO-220 http://www.fairchildsemi.com/ds/TI/TIP100.pdf Solenoids, flashers and lamp matrix low side. Use in place of TIP 120 (a TIP102 more robust).
TIP-107 NPN 100V 8A TO-220 http://www12.fairchildsemi.com/ds/TI/TIP105.pdf Lamp matrix high side
TIP-36C PNP 100V 25A TO-247 http://www.st.com/stonline/books/pdf/docs/5071.pdf Flippers; high power solenoid
MPS-A13 NPN 30V 1.2A TO-92 http://www.fairchildsemi.com/ds/MP/MPSA13.pdf Gottlieb Sys80 Driver Board
IRL540 N FET 100V 28A TO-220 http://www.irf.com/product-info/datasheets/data/irl540ns.pdf Stern (replacement) flashers, solenoids, lamp matrix low side
22NE10L N FET 100V 22A TO-220 http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00001959.pdf Stern flashers, solenoids, lamp matrix low side
2N5401 PNP 150V 0.6A TO-92 http://www.onsemi.com/pub_link/Collateral/2N5401-D.PDF switch/lamp matrix
2N6039 NPN Darlington 80V 4A TO-225 http://www.onsemi.com/pub_link/Collateral/2N6035-D.PDF lamp matrix
New entry Type xxV xxA TO- Put link here Purpose

4 Integrated Circuits

Integrated circuits (ICs) in older SS machines are usually Dual-Inline (DIP) packages. Part numbers for ICs may have prefixes and suffixes that specify details about the part. For example, SN74LS244N is a 74LS244 device. SN indicates the manufacturer (Texas Instruments) and N indicates a 20-pin DIP package. The package type suffix may vary by manufacturer. Some parts may have additional suffixes that indicate the temperature range of the part.

For information on TTL part numbering see 7400 Series Wikipedia article section on "Part Numbering Schemes".

Part Description  Package  Type Datasheet Link Typical Uses
 AD7524 
8 Bit CMOS Multiplying DAC
DIP-16
Does not apply
http://www.datasheetcatalog.org/datasheet/analogdevices/888358036ad7524.pdf
 74LS155 
1-of-4 Decoder/Multiplexer
DIP-16
Low Power Schottky
http://www.datasheetcatalog.org/datasheet/motorola/SN54LS156J.pdf
 74LS175 
Quad D-Type Flip-Flop
DIP-16
Low Power Schottky
http://www.datasheetcatalog.org/datasheets/90/375472_DS.pdf
 74LS244 
Octal 3-State Buffer / Line Driver / Line Receiver
DIP-20
Low Power Schottky
http://www.datasheetcatalog.org/datasheets/70/375527_DS.pdf


 74LS374 
Octal 3-State D-Type Flip-Flop
DIP-20
Low Power Schottky
http://www.datasheetcatalog.org/datasheets/90/375622_DS.pdf


 LM324 
Quad OP-Amp
DIP-14
Does not apply

http://www.datasheetcatalog.org/datasheet/fairchild/LM324.pdf ||


 LM339 
Quad Comparator
DIP-14
Does not apply

http://www.national.com/ds/LM/LM339.pdf%7C%7C WPC Opto Controller Board and WPC CPU Switch Matrix||

 ULN2803 
Octal Darlington Transistor Array
DIP-18
Does not apply

http://www.datasheetcatalog.org/datasheet/motorola/ULN2804A.pdf%7C%7C

Part Description Package Type Put link here Purpose


4.1 4000 Series CMOS ICs

A descriptive list of 4000 series chips along with datasheet links is available here.

4.2 7400 Series ICs

A descriptive list of 7400 series chips is available here.