Xenon

From PinWiki
Jump to navigation Jump to search
ExclamationPoint.jpg
Note: This page is a work in progress. Please help get it to a completed state by adding any useful information to it.


1 Introduction

Project Date: May 13, 1980

Date Of Manufacture: February, 1981
MPU: Bally MPU AS-2518-35
Type: Solid State Electronic (SS)
Production: 10,000 units (confirmed)

2 Technical Info

MPU: Bally MPU AS-2518-35
Type: Solid State Electronic (SS)

3 Paperwork

Manuals, schematics, coin cards...

4 Rubber Rings

Rubber Ring Sizes goes here

5 Photos

Teardown photos go here

6 References

7 Repair Logs

Did you do a repair? Log it here as a possible solution for others.


PROBLEM: Center pop bumber fires randomly during gameplay and test mode but NOT during attract mode

SOLUTION: Issue was resolved by replacing the ceramic disk .047 mfd 50 capacitor located on the leaf switch of the pop bumper.


PROBLEM: Left Flipper is very weak

SOLUTION: Issue was resolved by replacing the flipper coil with the correct coil for starters. #AQ-25-500_34-45, Then adjusting and cleaning the End Of Stroke(EOS) leaf switch resolved the issue totally.