Mattel

Note: This page is a work in progress. Please help get it to a completed state by adding any useful information to it.

1 Introduction

Mattel Electronics manufactured one model of electronic home model pinball machine. Mattel no longer has any manuals, information, or parts for this machine.

2 Games

• Las Vegas, 1977, 4 players

Playfield of Las Vegas

closer look at playfield

Las Vegas backglass

3 Technical Info

Mattel issued two manuals for "Las Vegas" pinball, an owner's manual and a service/parts manual. The Owner's Manual is part number 2442-0920. The Service manual is part number 0007-2880.

Service and Owner's manuals

Owner's Manual is available to download here: http://mattelhomepin.blogspot.com/p/users-manual.html

Las Vegas pinball machine is covered by the now expired patents number 4162793 (game computer board) and 4203602 (metal ball used as a switch between two "hot" contacts).

4 Problems and Solutions

4.4 Switch Problems

Original ball and chain tilt assembly

Williams A-15361 Tilt Assembly

The original "ball and chain" tilt assembly is very flimsy and not very good. It is suggested to replace it with a Williams # A-15361 Tilt Assembly for much better operation since it uses standardized parts.

You can also use these Marco Specialties parts along with two 6-32 wing nuts to make a complete tilt assembly:

(1) # 04-10346 and (1) # 20-6502-A

Playfield standup switch on Las Vegas

The standup switches look like bent up paper clips just like the switches on Sentinel/Wonder Wizard home pinball machines. These switches must be kept clean and shiny to work properly. The circled area is the switch.