User contributions
Jump to navigation
Jump to search
- 10:12, 2 November 2011 diff hist +64 N File:DSC0767.jpg Replacement external potentiometer, radio shack part # 271-1720. current
- 10:12, 2 November 2011 diff hist +85 N File:DSC0766.jpg Jumper that must be added to bypass the remains of the on-board volume potentiometer. current
- 10:11, 2 November 2011 diff hist +48 N File:DSC0765.jpg Aftermath of clipping one leg of volume pot R17. current
- 10:10, 2 November 2011 diff hist +84 N File:DSC0764.jpg Clipping one leg of the on-board volume potentiometer to take it out of the circuit. current
- 10:10, 2 November 2011 diff hist +136 N File:DSC0763.jpg Resistance reading of R17. This potentiometer doesn't *strictly* need to be removed from the circuit, since it reads more than 4K Ohms. current
- 10:09, 2 November 2011 diff hist +109 N File:DSC0762.jpg Taking a resistance reading of R17, the original on-board potentiometer that we suspect needs to be replaced. current
- 10:08, 2 November 2011 diff hist +52 N File:DSC0761.jpg Connector 10J4, showing solder bridge on pins 1 & 2. current
- 10:07, 2 November 2011 diff hist +97 N File:DSC0760.jpg System 4 original volume potentiometer. Connector 10J4 has its stock connector on at this point. current
