EM Repair
Jump to navigation
Jump to search
Note: This page is a work in progress. Please help get it to a completed state by adding any useful information to it. |
1 Introduction
Put system info here
2 Safety
3 Games
The "Big Three" manufacturers were Gottlieb, Williams and Bally. The "best of the rest" would probably include: Chicago Coin and Midway as well as some foreign brands such as Recel, Playmatic and Rally. There were many companies that only produced a few games, especially early on.
A quick search of the Internet Pinball Database:
http://www.ipdb.org/search.pl?gtype=EM&searchtype=advanced
Shows that between all the manufacturers, there are over 3403 games within this very broad category.
--Newmantjn 18:33, 22 April 2011 (BST)
4 Technical Info
4.1 Start-up Sequences
4.2 Schematics
5 Problems and Fixes
5.1 Coils
5.2 Relays
5.3 Stepper Units
5.4 Score Reels
5.5 Drop Targets
5.6 Roto Targets
5.7 Pop Bumpers
5.8 Kickers/Slingshots
5.9 Flippers
5.10 Power Supply Issues
6 Test Procedures
6.1 Testing with a Jumper Wire
6.2 Testing with a Test Light
7 Game Specific Problems and Fixes
Example would be servo controller on Independence Day pinball
8 Repair Logs
Did you do a repair? Log it here as a possible solution for others.