Pinball Part Datasheets

1 Optoelectronics

Part Number	Type	Package	Datasheet Link	Typical Uses
QED123	IR emitter	T1-3/4	http://www12.fairchildsemi.com/ds/QE/QED123.pdf	WPC, maybe others
QSD724	IR Receiver	T1-3/4	http://datasheet.octopart.com/QSD724-Fairchild-datasheet-8132.pdf	WPC original
QSD124	IR Receiver	T1-3/4	http://www.fairchildsemi.com/ds/QS/QSD124.pdf	WPC substitute, maybe others

2 Transistors

Part Number	Type	Volts	Amps	Package	Datasheet Link	Typical Uses
TIP102	NPN	100V	8A	TO-220	http://www.fairchildsemi.com/ds/TI/TIP100.pdf	Solenoids, flashers and lamp matrix low side
TIP107	NPN	100V	8A	TO-220	http://www12.fairchildsemi.com/ds/TI/TIP105.pdf	Lamp matrix high side
TIP36C	PNP	100V	25A	TO-247	http://www.st.com/stonline/books/pdf/docs/5071.pdf	Flippers; high power solenoid
IRL540	N FET	100V	28A	TO-220	http://www.st.com/stonline/books/pdf/docs/5071.pdf	Stern (replacement) flashers, solenoids, lamp matrix low side
22NE10L	N FET	100V	22A	TO-220	http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00001959.pdf	Stern flashers, solenoids, lamp matrix low side

| New entry || Type || xxV || xxA || TO- || Put link here || Purpose |}

3 Integrated Circuits

Integrated circuits (ICs) in older SS machines are usually Dual-Inline (DIP) packages. Part numbers for ICs may have prefixes and suffixes that specify details about the part. For example, SN74LS244N is a 74LS244 device. SN indicates the manufacturer (Texas Instruments) and N indicates a 20-pin DIP package. The package type suffix may vary by manufacturer. Some parts may have additional suffixes that indicate the temperature range of the part.

For information on TTL part numbering see wp:7400 series#Part numbering scheme