Capcom Repair

Note: This page is a work in progress. Please help get it to a completed state by adding any useful information to it.

1 Introduction

Put system info here

2 Games

Put list of games that used this system here (including anything that might not have been pinball)

3 Technical Info

Things like Data East's controller board was a copy of William's System 11 with some changes would go here.

4 Problems and Fixes

4.1 Power Driver Issues

This may not apply to some, as MPU might have been part of it.

4.4 Display Driver Board

Possibly doesn't apply to some, can't think of an example.

5 Game Specific Problems and Fixes

Example would be servo controller on Independence Day pinball

Capcom used tiny connectors to the ball trough opto boards. Carefully wrap a small cable tie around it and it stays put better.

Capcom also used too fine a wire for switches. Easy to have one break off, which in turn can make that switch and others not work. First thing to check for when a switch doesn't work. LTG :)

6 Repair Logs

Did you do a repair? Log it here as a possible solution for others.