Uploads by Thekorn
Jump to navigation
Jump to search
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 23:24, 26 August 2024 | Cybertruck pinball.jpg (file) |  |
223 KB | Cyberstuck with a pinball machine bulging out of its undersized bed. | 1 |
| 15:10, 13 July 2021 | Ps top after.jpg (file) |  |
422 KB | Zaccaria power supply with main capacitors replaced with modern snap caps. | 1 |
| 15:09, 13 July 2021 | Ps after repair.jpg (file) |  |
547 KB | Power supply showing empty and filled soldered holes. | 1 |
| 15:08, 13 July 2021 | Ps cap lugs.jpg (file) |  |
531 KB | Picture with positive and negative lugs of the capacitors marked. | 1 |
| 21:05, 30 May 2021 | Pin in model X.jpg (file) |  |
471 KB | 2 | |
| 15:20, 28 October 2014 | Flex with pin.jpg (file) |  |
465 KB | 2014 Ford Flex with an F-14 pinball machine loaded into it. | 1 |
| 09:55, 5 July 2012 | System 8 cpu x1.jpg (file) |  |
774 KB | System 8 CPU rev X1 (Still Crazy) | 1 |
| 10:13, 2 November 2011 | DSC0769.jpg (file) |  |
80 KB | Wiring for new connector that plugs into 10J4 on sound board. | 1 |
| 10:13, 2 November 2011 | DSC0768.jpg (file) |  |
100 KB | Wiring of replacement 5K audio-taper potentiometer. | 1 |
| 10:12, 2 November 2011 | DSC0767.jpg (file) |  |
91 KB | Replacement external potentiometer, radio shack part # 271-1720. | 1 |
| 10:12, 2 November 2011 | DSC0766.jpg (file) |  |
167 KB | Jumper that must be added to bypass the remains of the on-board volume potentiometer. | 1 |
| 10:11, 2 November 2011 | DSC0765.jpg (file) |  |
109 KB | Aftermath of clipping one leg of volume pot R17. | 1 |
| 10:10, 2 November 2011 | DSC0764.jpg (file) |  |
120 KB | Clipping one leg of the on-board volume potentiometer to take it out of the circuit. | 1 |
| 10:10, 2 November 2011 | DSC0763.jpg (file) |  |
158 KB | Resistance reading of R17. This potentiometer doesn't *strictly* need to be removed from the circuit, since it reads more than 4K Ohms. | 1 |
| 10:09, 2 November 2011 | DSC0762.jpg (file) |  |
107 KB | Taking a resistance reading of R17, the original on-board potentiometer that we suspect needs to be replaced. | 1 |
| 10:08, 2 November 2011 | DSC0761.jpg (file) |  |
139 KB | Connector 10J4, showing solder bridge on pins 1 & 2. | 1 |
| 10:07, 2 November 2011 | DSC0760.jpg (file) |  |
162 KB | System 4 original volume potentiometer. Connector 10J4 has its stock connector on at this point. | 1 |
