Cue
Jump to navigation
Jump to search
Note: This page is a work in progress. Please help get it to a completed state by adding any useful information to it. |
1 Introduction
- Date Of Manufacture: 1982
- Production: 6 units (confirmed)
- Theme: Billiards
- Notable Features: Flippers (2), Pop bumper (1), Passive bumpers (15), Spinning target (1). A single digital score display serves all four players. A large magnet under the center playfield is always energized unless the ball rolls over its surface switch, momentarily disabling the magnet, causing the ball to fly off in an unpredictable direction. Only one outlane, and it is protected by the lone pop bumper at bottom of playfield. Reversed flippers catch the ball if it goes out a side lane. The ball will sit at the end of the flipper until the flipper button is pressed. The left flipper returns the ball to the very top of playfield. The right flipper sends the ball through the spinning target to the upper playfield area.
2 Technical Info
- Type: Solid State Electronic (SS)
- A1 Displays: 1x DA-100 (6-digits) and 1x DA-300 (7-digits)
- A2 Power Module: TA-100
- A3 Solenoid Driver Module: SDU-100
- A4 MPU Module: M-200
- A5 Lamp Driver Module: LDU-100
- A6 Sound Board: SB-300
Return to Bally/Stern page.